|
Title |
Evaluation of Spalling Property and Water Vapor Pressure of Concrete with Heating Rate
|
|
Authors |
최경철 ; 이태규 ; 남정수 ; 박병근 ; 김규용 |
|
DOI |
https://doi.org/10.4334/JKCI.2012.24.5.605 |
|
Keywords |
가열 속도 ; 고강도 콘크리트 ; 수증기압력 ; 폭렬 ; 열팽창 변형 heating rate ; high strength concrete ; water vapor pressure ; spalling ; thermal strain |
|
Abstract |
Spalling of concrete occurs due to vapor pressure ignited explosion, temperature difference across a section, and combination of these factors. Factors affecting spalling can be classified into internal and external factors such as material property and environmental condition, respectively, have to be considered to precisely understand spalling behavior. An external environmental factor such as differences in heating rate cause internal humidity cohesion and different vapor pressure behavior. Therefore, spalling property, vapor pressure and thermal strain property were measured from concrete with compressive strengths of 30 MPa, 50 MPa, 70 MPa, 90 MPa, and 110 MPa, applied with ISO-834 standard heating curve of 1oC/min heating rate. The experimental results showed that spalling occurred when rapid heating condition was applied. Also, when concrete strength was higher, the more cross section loss from spalling occurred. Also, spalling property is influenced by first pressure cancellation effect of thermal expansion caused by vapor pressure and heating rates.
|