Title |
Optimum Geometry Factor of Structural Synthetic Fibers
|
Authors |
원종필 ; 임동휘 ; 박찬기 ; 한일영 ; 김방래 |
Keywords |
부착시험; 인발저항; 최적형상; 최적형상함수; 계면인성; 인발하중; interface toughness; optimum geometry; optimum geometry factor; pullout; structural synthetic fiber |
Abstract |
The purpose of the study is to establish an optimum geometry and optimum geometry factor through bond test of a structural synthetic fiber, which fully utilizes matrix anchoring without fiber fracturing with the maximum pullout resistance. Seven deformed structural synthetic fibers with widely different geometries were investigated and pullout test was conducted. Included parameters are seven different types of fiber and two of mortar matrixes. The test result shows that the crimped type structural synthetic fiber is significant improvement in the interface toughness(pullout energy) and pullout load. The pullout test was performed with various size of crimped type structural synthetic fiber in order to invest optimum geometry factor, In the basis of the test results, optimum geometry factor is established such as D=bα0αhλβ.
|