|
Title |
Load Transfer Mechanism of the Hybrid Beam-Column Connection System with Structural Tees
|
|
Keywords |
철근콘크리트 기둥-철골 보 합성골조; 스티프너 보강된 ㄱ형강; 연결용 강봉 및 연결판; composite frame system; moment transfer mechanism; reinforced concrete column - steel beam; connection |
|
Abstract |
The composite frame system with reinforced concrete column and steel beam has some advantages in the structural efficiency by complementing the shortcomings between the two systems. The system, however has also a lot of problems in practical design and construction process due to the material dissimilarities. Considering these circumstances, this research is aimed at the development of the composite structural system which enables the steel beams to be connected to the R/C columns with higher structural safety and economy. Basically the proposed connection system is composed of four split tees, structural angles reinforced by stiffener, high strength steel rods, connecting plates and shear plates. The structural tests have been carried out to verify the moment transfer mechanism from beam flange to steel rods or connecting plates through the angle reinforced by siffener. The four prototype specimens have been tested until the flange of beam reached the plastic states. From the tests, no distinct material dissimilarities between concrete and steel have been detected and the stress transfer through wide flange beam - structural angle - high strength steel rod or connecting plate is very favorable.
|