|
Title |
Evaluation on the Compression Capacity of Transfer Slab Systems according to the Variation of Column Length
|
|
Authors |
심연주(Yeon-Ju Sim) ; 최창식(Chang-Sik Choi) |
|
DOI |
https://doi.org/10.4334/JKCI.2016.28.6.695 |
|
Keywords |
전이시스템 ; 전이슬래브 ; 기둥의 길이 ; 축하중 ; 압축 transfer system ; transfer slab ; column’s length ; axial laod ; compression |
|
Abstract |
This paper presents compression capacity of transfer system in pilotis subjected to axial load. Recently, transfer system is usually used in low floors of wall-typed apartments when members’ sections are suddenly changed between upper walls and bottom columns. It can help transfer loads from the walls to the columns. Especially, a transfer girder system is usually used as one of transfer systems applied to a pilotis. However, the transfer girder system has low constructability and economics. Therefore, the other transfer system with transfer slab was suggested and has been studied. In this paper, to evaluate the compression capacity of transfer slab, tests were conducted on pilotis transfer slab systems subjected to axial load. First of all, two specimens were determined by FEM. The main parameter is length of the bottom columns. The lengh of the bottom columns were 40% and 50% of length of upper walls in the tranfer slab specimens. Results showed that the compression capacity of piloti transfer systems subjected to axial load was affected by length of bottom columns. The compression capacity is 52% higher than design strength for specimen with the bottom column’s length of 40% of length of the upper wall and 46% for specimen with the bottom column’s length of 50% of length of the upper wall.
|