Vinoth KumarM.1
KumarVinod1*
-
(Department of Electronics and Communication Engineering, SRM Institute of Science
and Technology, Delhi-NCR Campus, Ghaziabad, Uttar Pradesh, India {vinothkm, vinodkur1}@srmist.edu.in)
Copyright © The Institute of Electronics and Information Engineers(IEIE)
Keywords
Free space optical (FSO), Multiple input multiple output (MIMO), Atmospheric attenuation
1. Introduction
Hybrid fiber and free-space optical (FSO) communication systems are essential in fifth
and sixth-generation systems to expand internet services and manage traffic. FSO communication
can be integrated with fiber networks as a key to addressing the challenge of fiber
channel implementation up to the last mile [1]. The main advantage of FSO systems is an unlicensed optical spectrum with terahertz
(THz) frequencies.
In an FSO system, the signal transmitted to a receiver is focused by a telescope at
the receiver, and the received data are estimated by a photodetector, an optical band-pass
filter, and detection circuits [2]. Weather attenuation losses in an FSO communication system are significant factors
during implementation, particularly because of atmospheric conditions such as haze,
rain, fog, dust, snow, and smoke [3,4]. Unlike radio frequency, FSO links suffer the highest attenuation in fog and the
most negligible attenuation in the presence of rain. Hybrid and mixed RF/FSO systems
have been analyzed in applications between two nodes [4]. Both technologies were deployed together in a hybrid system for various hops.
Hybrid fiber-optical and free-space optical (FO-FSO) communication systems could be
a promising solution in future internet services due to the ever-increasing requirements
for efficient high speed, high bandwidth, and cost-effective systems. FO-FSO is mainly
considered for inter-building connections to avoid bending losses in fiber and reach
the last mile. The optical signal propagates through fiber and a wireless-communication
FSO channel using an optical carrier to carry the information from the transmitter.
Many types of research on fiber channels are being proposed and analyzed. Various
challenges are encountered in the case of fiber materials [5,6] and wireless channels. Examples are bending loss, signal dispersion while transmitting
an optical signal through a fiber channel, geometric loss, weather attenuation, background
noise, misalignment errors, and atmospheric turbulence due to wireless transmission
before the receiver receives the signal.
Section 2 of this research paper discusses related works, section 3 discusses system
design and estimation of attenuation values for various weather conditions. Mathematical
calculations are covered in section 4, and section 5 shows the results. Furthermore,
system observations are discussed in detail.
2. Related Work
Various studies have been published on optical wired and wireless networks connections.
The concept of transmitting a signal over an FO-FSO system is that optical signals
are modulated by radio frequency signals and transmitted over fiber and FSO channels.
Haze attenuation effects on a ``radio over free-space optical'' (RoFSO) transmission
system have been presented for Kuala Lumpur International Airport, Sepang (a town
in Malaysia). Air pollution index records from between October 2015 and 2017 have
been considered for analysis [7].
Techniques to generate 30-300 GHz (millimeter wave) frequency signals to transmit
data via fiber and the FSO channel are demonstrated [8]. Phase modulator (PM) and Mach-Zehnder modulator (MZM) based techniques of generating
mm-wave are investigated where 5G technology started using high bands such as millimeter-wave
leading to the high data rate. The authors analytically quantified the impact of fiber
nonlinearities on the performance of mmWave access networks with radio over fiber
(RoF) fronthaul [9].
Delhi’s climate was inspected under conditions of heavy to minimum rain, haze, and
clear sky, and an FSO connection was inspected for attenuation and the connection
length margin under various climatic conditions [10]. The scintillation effects on the performance of FSO links are analyzed [11]. Three optical transmission windows have been evaluated for multiple weather conditions
in a worst-case scenario [12]. However, there was no analysis of techniques that reduce the signal loss caused
by atmospheric turbulence.
A closed-form mathematical equation was derived to realize the reduced signal loss
caused by atmospheric turbulence, but the realization had restrictions in the range
of communication [13]. An iterative optimization technique was studied for signal attenuation due to geographical
causes and weather conditions [14]. This technique was analyzed for an FSO link, and the performance was observed to
increase the visibility distance and reduce BER. Digital modulation techniques such
as amplitude shift keying (ASK) and phase-shift keying (PSK) were implemented on an
FSO link, and the results were compared for various types of atmospheric turbulence
to improve signal transmission [15]. There has been some limitation in incrementing both data rate and transmission link.
So it is required to optimize the system to fulfill multimedia requests for new-generation
systems.
Several researchers have improved the performance of limited-distance signal transmission
in optical communication links with reduced signal loss. However, there is a shortage
of research on FSO links to increase transmission distance without attenuation due
to weather conditions. There is a limitation in backhaul networks in fiber optic transmission
systems and physical connection across networks between buildings, and the last mile
reach has yet to be rectified. The integration of fiber and FSO provides a unique
solution to the last-mile communication link implementation. However, the challenges
in signal attenuation by atmospheric turbulence and FSO channel estimation should
be considered while implementing the FO-FSO communication link.
This paper investigates the performance of an FO-FSO system to reach the last mile.
The multi- FSO channel technique was analyzed to overcome atmospheric attenuation.
FSO channel used in this model is the Gamma-Gamma turbulence model. An RF-modulated
light intensity model was analyzed for single, dual, and four FSO channels in terms
of BER, quality factor (Q-factor), and the eye diagram. Better receiver sensitivity
and a clear eye diagram were observed for four FSO channels than two FSO channels.
Attenuation was calculated for the weather conditions of Delhi. The results show that
the proposed method fulfills the bandwidth demand for communication over the last
mile and increases the distance of the link with minimum BER. Furthermore, simulated
results of the power penalty show the method’s capacity to overcome the effects of
Delhi’s fog-weather conditions.
3. System Design
The internal and external parameters in FSO systems listed in Table 1 were considered to examine the performance related to the design of FSO shown in
Fig. 1 and the environment where the system was implemented [3]. A radio signal modulates the optical signal in the FO-FSO communication system and
is transmitted across a fiber channel, which works as a coupler between the modulator
and the FSO channel [11]. A pseudo-random bit-sequence generator (PRBS) is employed to send information. A
non-return to zero (NRZ) pulse generator converts bit sequences into an electric signal.
An external Mach-Zehnder modulator imposes the information from the NRZ pulse generator
on the optical signal generated by a light source. A photodetector is placed at the
receiver to convert the optical signal into an electrical signal, followed by a low
pass filter. The system design is shown in Fig. 2 for single, dual, and four FSO channels. It consists of blocks of a transmitter,
a link channel, and a receiver. System parameters used for simulation are listed in
Table 2.
Fig. 1. Free-space optical (FSO) system.
Fig. 2. Block diagram of hybrid fiber-optical and free-space optical (FO-FSO) communication system.
Table 1 Internal and external parameters in the FSO system.
|
Internal parameters
(related to design)
|
External parameters (related to the environment)
|
|
Wavelength and
Optical - power
|
Visibility
|
|
Transmission bandwidth
|
Atmospheric attenuation
|
|
Divergence angle
|
Scintillation
|
|
Optical loss resting on the
transmit side
|
Deployment distance
|
|
Receiver - sensitivity and
Receive lens diameter
|
Window loss
|
|
Bit error rate (BER),
Receiver field of view
|
Pointing loss
|
Table 2 Various parameters used in the FO-FSO system.
|
System Parameters
|
|
PRBS generator
|
10Gbit/s
|
|
CW Laser wavelength and power
|
1550nm, 15dBm
|
|
Modulator extinction ratio
|
30dB
|
|
Fiber Channel
|
Single Mode (SMF)
|
|
FSO Channel model
|
Gamma-Gamma Model
|
|
FSO Transmitter aperture size
|
5cm
|
|
FSO Receiver aperture size
|
20cm
|
|
Weather conditions
|
Haze, Thin fog, Thick fog
|
|
Optical amplifier
|
5m each
|
|
Photodetector, Responsivity
|
PIN Photodiode, 1 A/W
|
3.1 Transmitter
The optically modulated signal is sent into the fiber channel from the transmitter.
A continuous-wave (CW) laser set at 1550-nm wavelength is suitable for the FO-FSO
communication system and results in less attenuation when compared to 1310 nm [10]. A PRBS generator generates a bit sequence at a bit rate of 10 Gbps, which is converted
into an electrical pulse by an NRZ generator. Signals from the CW laser and NRZ generator
are applied to the MZM, which modulates the light signal according to the instantaneous
values of the information signal.
3.2 Fiber and FSO Channel
The FO-FSO communication system includes two channels. The modulated optical signal
is in a radio frequency range and is transmitted from MZM over single-mode fiber (SMF).
An erbium-doped fiber amplifier (EDFA) of 5-m length is connected with the fiber channel
line and performs amplification because the signals need strengthening to enhance
the signal power. The fiber channel is connected to the FSO channel for wireless transmission
of the optical signal.
The transmission medium in the FSO system is atmospheric air. Various weather conditions
affect the FSO communication system's performance. Both fiber and FSO channels have
advantages and some limitations in propagating information signals. The optical fiber
link is susceptible to RF interference and has an extensive range of bandwidth capacity.
Lightwave propagation over glass fiber results in less attenuation than wireless transmission
[3]. The light signal transmitted over the FSO channel is attenuated by different atmospheric
conditions, such as haze, fog, rain, and dust, and the geometric losses lead to further
attenuation [11].
3.3 FSO Channel Model
Atmospheric channel models such as the gamma-gamma turbulence model, rician fading,
and rayleigh model represent the environment and its meteorological conditions. The
Gamma-Gamma turbulence model is utilized in this work for FSO link. The Gamma-Gamma
turbulence model employs two random gamma variables that differ significantly and
represent weak to strong atmospheric turbulence. A mathematical representation of
the gamma-gamma distribution model is given in Eq. (1). Its probability distribution function is expressed as [16,17]
where $\Gamma \left(*\right)$ is Gamma function, $K_{v}\left(*\right)$ is the ${v}^{\mathrm{th}}$order
modified Bessel function of the second kind, parameters $\alpha $ and $\beta $ both
are calculated based on atmospheric conditions using the following expressions [18],
where$~ \chi ^{2}$ = 0.5$C_{n}^{2}k^{7/6}L^{11/6}$, $d=~ \left(\frac{kD^{2}}{4L}\right)^{1/2}$,
k = 2${\pi}$/$~ \lambda $. ${D}$ - diameter of the receiver lens aperture, L - link
distance in meters, $C_{n}^{2}$ is an altitude-dependent index of refractive structure
parameter varying from 10$^{-13}$m$^{\mathrm{-2/3}}$ to 10$^{-17}$m$^{\mathrm{-2/3}}$
as strong to weak turbulence, respectively.
3.4 Receiver
A PIN (P-type, Intrinsic, N-type semiconductor) photodetector is used to detect the
optical signal and then pass it via a low-pass Bessel filter with a cutoff frequency
range that removes high-frequency components and filters noise from the signal. A
BER analyzer was used to examine the performance of the least BER values. The International
Telecommunication Union (ITU) declares a minimum BER range of less than 10$^{-9}$
must be maintained [19].
4. Estimation of FSO System Parameters and Atmospheric Attenuations
Based on the recommendation provided by ITU-R P.1814 [19], propagation-prediction methods to plan terrestrial FSO systems were followed. The
methods include procedures for estimating attenuation in clear-air, fog, rain, and
snow. Weather attenuation calculated under various visibility ranges using Eq. (8) is listed in Table 3. This proposed FO-FSO system is analyzed for whether attenuation loss in different
atmospheric conditions.
Table 3 Visibility range in Delhi weather condition and calculated attenuation values.
|
Month
|
December
|
January
|
February
|
March
|
|
Visibility in km
|
0.05
|
0.2
|
0.5
|
1
|
2
|
4
|
10
|
23
|
|
dB/km
(1550 nm)
|
272
|
60
|
21
|
9
|
4
|
2
|
0.4
|
0.2
|
|
Weather condition
|
FOG
|
HAZE
|
CLEAR
|
4.1 Atmospheric Attenuation
Atmospheric attenuation is the process where some or all of the electromagnetic wave
(EM) energy is lost when propagating through the atmosphere [14]. In this manner, air causes signal loss in an FSO connection in different ways, such
as absorption, scattering, and scintillation. The atmospheric attenuation can be described
by Beer's Law [20]:
where
L - Transmitter and receiver distance in km
$\lambda $ - Wavelength
${P}_{R}$ - Optical-power received at distance L
${P}_{T}$ - Optical power at the source
In general, the specific atmospheric attenuation $\gamma $ can be expressed as [3]:
where
$\gamma _{\textit{clear}\_ air}$ - Specific attenuation in clear air
$\gamma _{\textit{excess}}$ - Specific attenuation results from the occasional presence
of fog, mist, haze, drizzle, rain, snow, hail, etc.
In clear air conditions, attenuation happens because of absorption by gaseous molecules.
The interaction between photons and atoms [21] (H$_{2}$, N$_{2}$, H$_{2}$O, CO$_{2}$, O$_{2}$) drives the absorption of the incident
photons and raises the temperature. The type of gas molecules and their concentration
are used to find out the absorption coefficient. $\gamma _{\textit{clear}\_ air}$
is negligible when selecting the laser's wavelengths to fall inside atmospheric transmission
windows.
The FSO system is generally processed with wavelengths near 690 nm, 780 nm, 850 nm,
and 1550 nm. In the FSO channel, the excess particles such as haze, fog, mist, drizzle,
rain, and snow are causes of extra attenuation, $\gamma _{\textit{excess}}$. These
excess particles mainly cause scattering (angular redistribution of the incident flux),
reducing the flux propagation in the actual path.
A mathematical representation of attenuation coefficient $\gamma (\lambda )$ is given
as [22]:
where $\gamma (\lambda )$ is derived from four individual parameters as a function
of wavelength.
$\beta _{m}$ - Molecular scattering coefficient
$\beta _{a}$ - Aerosol scattering coefficient
$\alpha _{m}$ - Molecular absorption coefficient
$\alpha _{a}$ - Aerosol absorption coefficient.
4.2 Absorption and Scattering
The wavelengths used in FSO systems are 690 nm, 790~nm, 850 nm, and 1550 nm and are
located in transmission windows since molecular absorptions are insignificant, and
they can be negligible when taking into account the way that these elements are exceptionally
minor in this spectrum region [22,23]. Scattering is the redirection of light to propagate along a path resulting in a
reduction in expected light intensity [24]. Molecular or Rayleigh scattering [25] is a source of degradation in the electromagnetic radiation in a communication link.
It is known that molecular, scattering, and aerosol absorption are insignificant,
so the attenuation coefficient from Eq. (4) can be approximated by aerosol scattering:
4.3 Visibility
Visibility can be straightforwardly characterized as the natural eye’s ability to
see the contrast between a white and dark boundary. The visibility range is the space
in kms or miles at which a big dark object can be seen against the horizon sky in
daytime [26]. Because the atmosphere has complex shape and is multidirectional, meeting the terms
in the hypothesis of Mie scattering to air particles is exceptionally complicated,
so the attenuation of a signal owing to distribution is utilized depending on a detailed
empirical equation [27,28]. The observational model is expressed as:
q(v) - The particle size distribution coefficient.
Visibility (V in km) has been studied by Koschmieder law, visibility model established
90 years ago, Middleton (1947) and Duntley (1948a) [29,30]:
Also, the attenuation prediction formula has been studied using [10,31]:
V - Meteorological visibility: a path beyond which transmittance goes down to a value$\varepsilon
$.
q (v) is the particle size distribution coefficient in Eq. (6), and (8) can be expressed with the help of some models. To calculate the FSO link budget,
the Kruse model is commonly used.
The particle size distribution coefficient q in dense fog was estimated using the
model above for visibility less than 6 km as $0.585\mathrm{V}^{1/3}$ and the value
of visibility, V<1 km, was proposed by Kim model [32] as:
For tropical regions where fog attenuation is not be taken into account, only haze
attenuation is be measured. The Kruse model [31] is acceptable in this case because we are not required to consider visibility of
less than 1 km. The value for severe haze defined by the International Visibility
Code is around 2.5 km of visibility. Table 3 displays International Visibility Codes for Delhi atmospheric condition [33], and calculated attenuation values using Eq. (8) are listed.
5. Results and Discussion
Tables 4-7 show attenuation values for atmospheric conditions such as haze, thin fog, thick
fog, and heavy fog based on visibility level. BER is calculated as [21]:
Fog is the dominating atmospheric condition in more significant attenuation in FSO
systems. Attenuation also depends on rain, low clouds, dust, snow, and combinations
of each. Different shapes of eye diagrams with BER values were obtained for various
attenuation channels. Wide-open and precise eye diagrams for multiple FSO channels
were obtained for respective attenuation values.
The FO-FSO system was checked for three different FSO transmission channels at different
atmospheric attenuation values: 4 dB/km for haze conditions, 9 dB/km for thin fog,
16 dB/km for thick fog, and 22 dB/km for heavy fog conditions. Fig. 3 shows eye diagrams and quality factors for haze conditions for single, dual, and
four-channel FSO communication systems with a 3.5-km distance. In haze conditions,
the attenuation factor is taken as 4dB/km.
Fig. 3. HAZE conditions, attenuation 4dB/km, 3.5-km distance.
Figs. 4-6 are eye diagrams from simulated results with attenuation of 9 dB/km, 16 dB/km, and
22 dB/km for thin, thick, and heavy fog; single, dual, and four channels; and 3.5
km, 2.2 km, and 1.7 km, respectively. The quality factor decreases when increasing
the atmospheric attenuation and the range of the FSO link. An additional channel reduces
error and increases the Q-factor. Variations in Q-factor are listed in Tables 4-7.
Hybrid FO-FSO systems with single and dual channels were simulated to calculate the
power penalty and verify the system's feasibility. Initially, the single-channel FSO
of 1.5 km was simulated without fiber connected to the system considering 0- dB/km
attenuation as a back-to-back reference model. Secondly, the attenuation for heavy
fog conditions of 22 dB/km was used for simulation, and the bit error rate was observed.
It is possible to achieve error-free operation for a minimum power penalty while adding
a fiber channel before the FSO channel. A fiber channel with a 15-km length and 0.2
dB/km has been simulated along with single and dual FSO channels, which achieved reasonable
error-free operation and a good quality factor with minimal power penalty.
The signal output degrades as the atmospheric attenuation, FSO channel range, and
optical fiber length increase. Fig. 7 shows the variations in bit error rate for 1*1, 2*2, and 4*4 FSO channels with 22-dB/km
attenuation. Improvement in received bits is observed as the number of channels increases
for the wireless optical medium. The Achieved FSO link range of the proposed system
has been compared with a few existing works, and the comparison is listed in Table 8.
The power penalty value increases as the lengths of both channels and attenuations
increase, as shown in Fig. 8 between received power and various lengths of FSO channels with attenuations of haze,
fog conditions. Also, Fig. 9 shows that the power penalty significantly increases after 0.8 km in all cases. For
the current bit rate of 10 Gbps, this system can deliver effective transmission up
to 0.8 km, and there is minimal power penalty for increased lengths. The analysis
shows that more than one FSO channel in the FO-FSO system leads to the capacity to
overcome the effects of Delhi’s fog weather conditions with an increment of the distance
of the link, minimal bit error rate, and minimal power penalty.
Fig. 4. Thin fog conditions, attenuation 9 dB/km, 3.5-km distance.
Fig. 5. Thick fog conditions, attenuation 16 dB/km, 2.2-km distance.
Fig. 6. Heavy fog conditions, attenuation 22 dB/km, 1.7-km distance.
Fig. 7. Min. log of BER versus MIMO FSO Channel range.
Fig. 8. Total power (dBm) versus single FSO channel range with various attenuations.
Fig. 9. Total power (dBm) versus MIMO FSO channel range with various attenuations.
Table 4 Haze conditions, visibility 2km, bit rate - 10 Gb/sec.
|
|
|
Single FSO channel
|
Dual FSO channels
|
Four FSO channels
|
|
Range (km)
|
Attenuation (dB/km)
|
Quality factor
|
Bit error rate
|
Quality factor
|
Bit error rate
|
Quality factor
|
Bit error rate
|
|
1
|
4
|
454.072
|
0
|
638.679
|
0
|
812.404
|
0
|
|
2
|
4
|
166.401
|
0
|
211.796
|
0
|
294.016
|
0
|
|
3
|
4
|
58.269
|
0
|
83.714
|
0
|
115.676
|
0
|
|
3.5
|
4
|
36.6368
|
2.29E-294
|
56.71
|
0
|
77.8962
|
0
|
Table 5 Thin fog conditions, visibility 1km, bit rate - 10 Gb/sec.
|
|
|
Single FSO channel
|
Dual FSO channels
|
Four FSO channels
|
|
Range (km)
|
Attenuation (dB/km)
|
Quality factor
|
Bit error rate
|
Quality factor
|
Bit error rate
|
Quality factor
|
Bit error rate
|
|
1
|
9
|
264.447
|
0
|
374.72
|
0
|
484.123
|
0
|
|
2
|
9
|
42.166
|
0
|
64.167
|
0
|
86.1378
|
0
|
|
3
|
9
|
7.8894
|
1.25E-15
|
12.3192
|
2.76E-35
|
18.2329
|
1.03E-74
|
|
3.5
|
9
|
3.23557
|
0.00055843
|
5.4209
|
2.61E-08
|
8.33708
|
3.10E-17
|
Table 6 Thick fog conditions, visibility 0.7km, bit rate - 10 Gb/sec.
|
|
|
Single FSO channel
|
Dual FSO channels
|
Four FSO channels
|
|
Range (km)
|
Attenuation (dB/km)
|
Quality factor
|
Bit error rate
|
Quality factor
|
Bit error rate
|
Quality factor
|
Bit error rate
|
|
1
|
16
|
121.463
|
0
|
163.228
|
0
|
231.384
|
0
|
|
2
|
16
|
6.48669
|
3.83E-11
|
9.7643
|
6.14E-23
|
14.7694
|
8.39E-50
|
|
2.2
|
16
|
3.39312
|
0.000310564
|
5.5393
|
1.33E-08
|
8.7939
|
5.94E-19
|
Table 7 Heavy fog conditions, visibility 0.4km, bit rate - 10 Gb/sec.
|
|
|
Single FSO channel
|
Dual FSO channels
|
Four FSO channels
|
|
Range (km)
|
Attenuation (dB/km)
|
Quality factor
|
Bit error rate
|
Quality factor
|
Bit error rate
|
Quality factor
|
Bit error rate
|
|
1
|
22
|
54.0765
|
0
|
72.5495
|
0
|
105.343
|
0
|
|
1.5
|
22
|
7.90815
|
1.07E-15
|
12.0453
|
7.65E-34
|
18.0323
|
3.85E-73
|
|
1.7
|
22
|
3.22974
|
0.000563
|
5.4456
|
2.21E-08
|
8.7737
|
7.07E-19
|
Table 8 Performance comparison of the proposed system with previous works.
|
Reference
|
Transmission method
|
Data rate
|
FSO Channel range and attenuation
|
|
Ref [1]
|
Hybrid Fiber- FSO
|
25Gbps
|
0.5km, 0.2 dB/km
|
|
Ref [2]
|
Mode division multiplexing (MDM) - FSO
|
40Gbps
|
3km, 0.2 dB/km
650m, 2.62 dB/km
|
|
Ref [12]
|
FSO link
|
2.5Gbps
|
0.5km, 70 dB/km
|
|
Proposed system
|
Hybrid Fiber- FSO
|
10Gbps
|
3.5km, 4dB/km
2km, 9dB/km
1km, 22dB/km
|
6. Conclusion
This work investigated an FO-FSO system with 1*1, 2*2, and 4*4 FSO channels under
various atmospheric conditions based on visibility levels. Attenuation in the haze,
thin fog, thick fog, and heavy fog have been analyzed for all FSO channels. The results
show that the signal performance experiences degradation as attenuation increases
(i.e., reduction in Q-factor and increase BER as the channel's length and power penalty
grow). But increasing the channel count leads to better signal transmission over free
space. The effects of communication parameters on different atmospheric conditions
for free-space transmission were shown by simulation of FSO channels. Based on the
observations, the multi-channel FSO design integrated with fiber optic communication
could become a promising solution for cutting-edge optical communication networks
due to its improved performance in information transmission up to the last mile.
REFERENCES
Nguyen D.-N., Zvanovec S., Ghassemlooy Z., Nov. 2019, Mitigation of dispersion and
turbulence in a hybrid optical fibre and free-space optics link using electronic equalisation,
Optik, Vol. 196, pp. 163154
Garg A. K., Janyani V., Batagelj B., Zainol Abidin N. H., Abu Bakar M. H., Jan. 2021,
Hybrid FSO/fiber optic link based reliable & energy efficient WDM optical network
architecture, Optical Fiber Technology, Vol. 61, pp. 102422
Bloom S., Korevaar E., Schuster J., Willebrand H., Jun. 2003., Understanding the performance
of free-space optics [Invited], Journal of Optical Networking, Vol. 2, No. 6, pp.
178
Siddharth M., Shah S., Swaminathan R., 2020, February, Outage analysis of adaptive
combining scheme for hybrid FSO/RF communication, In 2020 National Conference on Communications
(NCC) IEEE, pp. 1-6
Kabir Sarower, et al. , Dec. 2020, Effect of Heat Resistant Coating on the Drilled
Hole Quality of Hybrid Fiber Reinforced Epoxy Composite, Evergreen, Vol. 7, No. 4,
pp. 530-537
Syuhaimi Mohammad, Mohamed Ibrahim , 2013, Highly utilized fiber plant with extended
reach and high splitting ratio based on AWG and EDFA characteristics, ETRI Journal,
Vol. 35, No. 5, pp. 786-796
Zainurin S. N., Ismail I., Saulaiman U. S., Ismail W. Z. W., Mustafa F. H., Sahrim
M., Jamaluddin J., Balakrishnan S. R., 2020, A study on Malaysia atmospheric effect
on radio over free space optic through radio frequency signal and light propagation
in fiber for future communication development, THE 2ND INTERNATIONAL CONFERENCE ON
APPLIED PHOTONICS AND ELECTRONICS 2019 (InCAPE 2019)
Vinoth Kumar M., Kumar V., 2020, Relative Investigation of Methods to Generate Millimeter
Wave in Radio-Over-Fiber Communication, Lecture Notes in Networks and Systems, pp.
567-574
Morra A. E., Hranilovic S., 1 Jan.1, 2019, Mixed mmWave and Radio-Over-Fiber Systems
With Fiber Nonlinearity, in IEEE Photonics Technology Letters, Vol. 31, No. 1, pp.
23-26
Srivastava D., Kaur G., Singh G., Singh P., 2020, Evaluation of Atmospheric Detrimental
Effects on Free Space Optical Communication System for Delhi Weather, Journal of Optical
Communications (published online ahead of print 2020)
Sharma S., Madhukumar A. S., Swaminathan R., 2019, Effect of Pointing Errors on the
Performance of Hybrid FSO/RF Networks, IEEE Access, Vol. 7, pp. 131418-131434
Gupta A., Comparative analysis of free space optical communication system for various
optical transmission windows under adverse weather conditions, ProcediaComputSci 2016;89,
pp. 99-106
Sunilkumar K., Anand N., Satheesh S. K., Krishna Moorthy K., Ilavazhagan G., Apr.
2019, Performance of free-space optical communication systems: effect of aerosol-induced
lower atmospheric warming, Optics Express, Vol. 27, No. 8, pp. 11303
Lema G. G., Jul. 2020, Free space optics communication system design using iterative
optimization, Journal of Optical Communications(published online ahead of print 2020)
Ashraf M., Baranwal G., Prasad D., Idris S., Beg M. T., 2018, Performance Analysis
of ASK and PSK Modulation Based FSO System Using Coupler-Based Delay Line Filter under
Various Weather Conditions, Optics and Photonics Journal, Vol. 08, No. 08, pp. 277-287
Al-Habash M. A., Aug. 2001., Mathematical model for the irradiance probability density
function of a laser beam propagating through turbulent media, Optical Engineering,
Vol. 40, No. 8, pp. 1554
Andrews Larry C., Ronald L. Phillips, Hopen Cynthia Y., 2001, Laser beam scintillation
with applications, SPIE press, Vol. 99
Uysal M., Li Jing , Yu Meng , Jun. 2006, Error rate performance analysis of coded
free-space optical links over gamma-gamma atmospheric turbulence channels, IEEE Transactions
on Wireless Communications, Vol. 5, No. 6, pp. 1229-1233
ITU-R P.1814, R. , 2007, Prediction methods required for the design of terrestrial
free-space optical links
Gagliardi R. M., Karp S., 1995, Optical Communication (2nd ed.), New York: John Wiley
Recommendation ITU-R P.676-11, R. (09/2016) , Attenuation by atmospheric gases
Biswas A., Piazzolla S., 2006, The atmospheric channel. Deep Space Communications,
pp. 121-213
Popoola Wasiu , Ghassemlooy Z., Awan Muhammad Saleem, 2009, Atmospheric channel effects
on terrestrial free space optical communication links., In 3rd international conference
on computers and artificial intelligence (ECAI 2009), pp. 17-23
Jia Zhuanhong, Zhu Qinglin, Ao Faliang, 2006, Atmospheric attenuation analysis in
the FSO link., In 2006 international conference on communication technology, IEEE,
pp. 1-4
ITU-R P.1817, R. , 2007, Propagation data required for the design of terrestrial free-space
optical links
Willebrand H., Ghuman B. S., 2001, Free-Space Optics: Enabling Optical Connectivity
in Today's Network, Indianapolis, Indiana: Sams Publishing
Weichel H., 1990, Laser Beam Propagation in the Atmosphere, WA: SPIE Optical Engineering
Press
Prokes A., Jun. 2009., Atmospheric effects on availability of free space optics systems,
Optical Engineering, Vol. 48, No. 6, pp. 066001
Stone R. G., Middleton W. E. K., Apr. 1942., Visibility in Meteorology: The Theory
and Practice of the Measurement of the Visual Range, Geographical Review, Vol. 32,
No. 2, pp. 347
Duntley S.Q., The Reduction of Apparent Contrast by the Atmosphere, Journal of The
Optical Society of America, Vol. 38, No. 1948a, pp. 179-191
Kruse PW, McGlauchlin LD, 1962, , Elements of infraredtechnology: generation, transmission
and detection, New York:J. Wiley and Sons
Kim I. I., McArthur B., Korevaar E. J., Feb. 2001, Comparison of laser beam propagation
at 785 nm and 1550 nm in fog and haze for optical wireless communications, Optical
Wireless Communications III
Delhi Weather Report and Forecast accessed for winter seaon from December, 2019 to
March, 2020.
Author
M. Vinoth Kumar is currently pursuing his Ph.D. degree at the Department of Electronics
and Communication Engineering, SRM Institute of Science and Technology, Delhi-NCR
Campus, India. He received his M.Tech. VLSI design and Embedded Systems from B. S.
Abdur Rahman University, Chennai, Tamil Nadu, India, in 2013 and B.E. Electronics
and Instrumentation Engineering from Anna University, Tamil Nadu, India, in 2009.
His research interests are optical fiber communication networks, free-space optical
communication systems, photonics, and radio-over-fiber.
Vinod Kumar earned his M. Tech and a Ph.D. degree in Electronics Engineering from
the Indian Institute of Technology, BHU, Varanasi, India, in 2008 and 2015. He has
more than 15 years of experience in teaching, research, and administration. He is
currently working as an Associate Professor at SRM IST Delhi-NCR Campus, Ghaziabad
(U.P.). His areas of interest include MOS Sensors, WSN, GaN HEMT, Radio over Fiber,
etc. He has published more than 40 research papers in international journals and conferences
like IEEE Sensors, IEEE Transactions, JAP, Elsevier, Springer, etc.