Mobile QR Code QR CODE
Export citation EndNote
1 
1.Qian, D., Dickey, E. C., Andrews, R., and Rantell, T., “Load Transfer and Deformation Mechanisms in Carbon Nanotube-Polystyrene Composites,” Applied Physics Letters, Vol. 76, No. 20, 2000, pp. 2868-2870.DOI
2 
2.Andrews, R., Jacques, D., Minot, M., and Rantell, P., “Fabrication of Carbon Multiwall Nanotube/Polymer Composites by Shear Mixing,” Macromolecular Materials and Engineering, Vol. 287, 2002, pp. 395-403.DOI
3 
3.Park, J. M., Kim, D. S., Lee, J. R., and Kim, T. W., “Nondestructive Damage Sensitivity and Reinforcing Effect of Carbon Nanotube/Epoxy Composites Using Electro- Micromechanical Technique,” Materials Science Engineering: C, Vol. 23, No. 6-8, 2003, pp. 971-975. (doi: http://dx. doi.org/10.1016/j.msec.2003.09.131)Google Search
4 
4.Flahaut, E., Peigney, A., Laurent, C. H., Marlière, C. H., Chastel, F., and Rousset, A., “Carbon Nanotube- Metal-Oxide Nanocomposites: Microstructure Electrical Conductivity and Mechanical Properties,” Acta Materialia, Vol. 48, 2000, pp. 3803-3812. (doi: http://dx.doi.org/10. 1016/S1359-6454(00)00147-6)Google Search
5 
5.Peigney, A., Laurent, C. H., Flahaut, E., and Rousset, A., “Carbon Nanotubes in Novel Ceramic Matrix Nano-compo-sites,” Ceramics International, 2000, Vol. 26, pp. 677-683. (doi: http://dx.doi.org/10.1016/S0272-8842(00) 00004-3)Google Search
6 
6.Konsta-Gdoutos, M. S., Metaxa, Z. S., and Shah, S. P., “Highly Dispersed Carbon Nanotube Reinforced Cement Based Materials,” Cement and Concrete Research, Vol. 40, No. 7, 2010, pp. 1052-1059. (doi: http://dx.doi.org/ 10.1016/j.cemconres.2010.02.015)Google Search
7 
7.Li, G. Y., Wang, P. M., and Zhao, X., “Mechanical Behavior and Microstructure of Cement Composites Incorporating Surface-Treated Multi-Walled Carbon Naotubes,” Carbon, Vol. 43, No. 6, 2005, pp. 1239-1245. (doi: http://dx.doi.org/10.1016/j.carbon.2004.12.017)Google Search
8 
8.Ijiima, S., “Helical Microtubules of Graphitic Carbon,” Nature, Vol. 354, 1991, pp. 56-58.DOI
9 
9.Saez de Ibarra, Y., Gaitero, J. J., Erkizia, E., and Campillo, I., “Atomic Force Microscopy and Nanoindentation of Cement Pastes with Nanotube Dispersions,” Physica Status Solidi A, Vol. 203, No. 6, 2006, pp. 1076-1081. (doi: http://dx.doi.org/10.1002/pssa.200566166)Google Search
10 
10.Wansom, S., Kidner, N. J., Woo, L. Y., and Mason, T. O., “AC-Impedance Response of Multiwalled Carbon Nanotube/Cement Composites,” Cement and Concrete Composites, Vol. 28, No. 6, 2006, pp. 509-519. (doi: http://dx.doi.org/10.1016/j.cemconcomp.2006.01.014)Google Search
11 
11.Cwirzen, A., Habermehl-Chirzen, K., and Penttala, V., “Surface Decoration of Carbon Nanotubes and Mechanical Properties of Cement/Carbon Nanotube Composites,” Advances in Cement Research, Vol. 20, No. 2, 2008, pp. 65-73. (doi: http://dx.doi.org/10.1680/adcr.2008.20.2.65)Google Search
12 
12.Kreupl, F., Graham, A. P., Liebau, M., Duesberg, G. S. Seidel, R., and Unger, E., “Carbon Nanotubes for Interconnect Applications,” Proceedings of the IEEE International Electron Devices Meeting (IEDM '04), 2004, pp. 683-686.Google Search
13 
13.Li, G. Y., Wang, P. M., and Zhao, X., “Pressure-Sensitive and Microstructure of Carbon Nanotube Reinforced Cement Composites,” Cement and Concrete Composites, Vol. 29, No. 5, 2007, pp. 377-382. (doi: http://dx.doi. org/10.1016/j.cemconcomp.2006.12.011)Google Search
14 
14.Zhi, G. and Gao, Z., “Applications of Nanotechnology and Nanomaterials in Construction,” Proceedings of the 1st International Conference on Construction on Developing Coun-tries (ICCIDC-1 '08), Advancing and Integrating Construction Education, Reseach & Practice, Pakistan, Iran, 2008.Google Search
15 
15.Rana, A. K., Rana, S. B., and Chaipanich, A., “Significance of Nanotechnology in Construction Engineering,” International Journal of Recent Trends in Engineering, Vol. 4, 2009, pp. 46-48.Google Search
16 
16.Saafi, M., “Wireless and Embedded Carbon Nanotube Networks for Damage Detection in Concrete Structures,” Nanotechnology, Vol. 20, 2009, pp. 1-7. (doi: http://dx. doi.org/10.1088/0957-4484/20/39/395502)Google Search
17 
17.Kang, I., Heung, Y. Y., Kim, J. H., Lee, J. W., Gollapudi, R., Subramaniam, G., Narasimhadevara, S., Hurd, D., Kirikera, G. R., Shanov, V., Schulz, M. J., Shi, D., Boerio, J., Malll, S., and Ruggles-Wren, M., “Introduction to Carbon Nanotube and Nanofiber Smart Materials,” Composites Part B: Engineering, Vol. 37, 2006, pp. 382-394. (doi: http://dx.doi.org/10.1016/j.compositesb.2006. 02.011)Google Search
18 
18.Yu, X. and Kwon, E., “A Carbon Nanotube/Cement Composite with Piezoresistive Properties,” Smart Materials and Structures, Vol. 18, 2009, pp. 1-5. (doi: http://dx. doi.org/10.1088/0964-1726/18/5/055010)Google Search
19 
19.Kang, I., Schulz, M. J., Kim, J. H., Shanov, W., and Shi, D., “A Carbon Nanotube Strain Sensor for Structural Health Monitoring,” Smart Materials and Structures, Vol. 15, 2006, pp. 737-748. (doi: http://dx.doi.org/10. 1088/0964-1726/15/3/009)Google Search
20 
20.Han, B., Yu, X., and Kwon, E., “A Self-Sensing Carbon Nanotube/Cement Composite for Traffic Monitoring,” Nanotechnology, Vol. 20, 2009, pp. 1-5. (doi: http://dx. doi.org/10.1088/0957-4484/20/44/445501)Google Search
21 
21.Lee, J. H., Park, H. G., Lee, J. S., Ryu, Y. S., Hong, S. B., and Kim, W. J., “A Study on the Dynamics of CNT Contained Functional Concrete and Temperature Characteristics,” Proceedings of Korea Concrete Institute, Vol. 23, No. 2, 2011, pp. 365-366.DOI
22 
22.Lee, J. H., Lee, J. W., Lee, J. S., Hong, S. B., Kim, W. J., and Ryu, Y. S., “The Research on the Hydration Heat Reduction Characteristics of CNT Mixing Functionality Concrete,” Proceedings of Korea Concrete Institute, Vol. 24, No. 2, 2012, pp. 733-734.Google Search
23 
23.Xie, X. L., Mai, Y. W., and Zhou, X. P., “Dispersion and Alignment of Carbon Nanotubes in Polymer Matrix: A Review,” Materials Science and Engineering R, Vol. 49, 2005, pp. 89-112. (doi: http://dx.doi.org/10.1016/j. mser.2005.04.002)Google Search
24 
24.Makar, J. M. and Beaudoin, J. J., “Carbon Nanotubes and Their Applications in the Construction Industry,” Proceedings of the 1st International Symposium on Nanotechnology in Construction, Paisley, Scotland, 2003, pp. 331-341.Google Search
25 
25.Shah, S. P., “Nanoscale Modification of Cementitious Materials,” Nanotechnology in Construction 3: Proceedings of the NICOM3, 2009, pp. 125-130.Google Search
26 
26.Ferro, G. J., Tulliani, M., and Musso, S., “Carbon Nanotubes Cement Composites,” Convegno IGF XXI Cassino 2011, Italy, 2011, pp. 49-59.Google Search
27 
27.Luo, J., Duan, J. Z., and Li, H., “The Influence of Surfactants on the Processing of Multi-Walled Carbon Nanotubes in Reinforced Cement Matrix Composites,” Physica Status Solidi A, Vol. 206, No. 12, 2009, pp. 2783-2790. (doi: http://dx.doi.org/10.1002/pssa.200824310)Google Search
28 
28.Sanchez, F. and Ince, C., “Microstructure and Macroscopic Properties of Hybrid Carbon Nanofiber/Silica Fume Cement Composites,” Composites Science and Technology, Vol. 69, 2009, pp. 1310-1318. (doi: http://dx.doi.org/ 10.1016/j.compscitech.2009.03.006)Google Search