Mobile QR Code QR CODE
Export citation EndNote
1 
1.Park, R. and Paulay, T., Reinforced Concrete Structures, Wiley Interscience Publication, New Jersey, USA, 1933, 769 pp.Google Search
2 
2.ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318M-11) and Commentary, American Concrete Institute, Farmington Hills, Michigan, USA, 2011, 503 pp.Google Search
3 
3.European Standard EN 1992-1-1:2004, Eurocode 2 : Design of Concrete Structures, British Standard, Brussels, Belgium, 2004, 225 pp.Google Search
4 
4.Wallace, J. W. and Thomsen IV, J. H., “Seismic Design of RC Structural Walls. Part II: Application,” Journal of Structural Engineering, ASCE, Vol. 121, No. 1, 1995, pp. 88-101.DOI
5 
5.Paulay, T. and Priestley, M. J. N., Seismic Design of Reinforced Concrete and Masonry Buildings, Wiley Interscience Publication, New Jersey, USA, 1992, 768 pp.DOI
6 
6.Kang, S. M. and Park, H. G., “Ductility Confinement of RC Rectangular Shear Wall,” Journal of the Korea Concrete Institute, Vol. 14, No. 4, 2002, pp. 530-539.DOI
7 
7.Razvi, S. and Saatcioglu, M., “Confinement Model for High-Strength Concrete,” Journal of Structural Engineering, ASCE, Vol. 125, No. 3, 1999, pp. 281-289.DOI
8 
8.Ali, A. and Wight, J. K., “RC Structural Walls with Staggered Door Openings,” Journal of Structural Engineering, ASCE, Vol. 117, No. 5, 1991, pp. 1514-1531.DOI
9 
9.Thomsen, IV. J. H. and Wallace, J. H., “Displacement- Based Design of Slender Reinforced Concrete Structural Walls-Experimental Verification,” Journal of Structural Engineering, ASCE, Vol. 130, No. 4, 2004, pp. 618-630.DOI
10 
10.Kim, L. B., “Seismic Performance of Free-Edge Wall-Ends with Interlocking Spiral Reinforcement,” M. S. Thesis, Department of Architecture, Seoul National University, South Korea, 2001, 88 pp.Google Search
11 
11.Yang, K. H., “Development of Performance-Based Design Guideline for High-Density Concrete Walls,” Technical Report (2nd. year), Kyonggi University, 2013, 115 pp.Google Search
12 
12.Cardenas, A. E. and Magura, D. D., “Strength of High- Rise Shear Walls-Rectangular Cross Section,” ACI Special Publication, Vol. 36, 1972, pp. 119-150.Google Search
13 
13.Kang, S. M. and Park, H. G., “Moment-Curvature Relationship of Structural Walls with Confined Boundary Element,” Journal of the Korea Concrete Institute, Vol. 15, No. 2, 2003, pp. 323-334.DOI
14 
14.Yang, K. H., Mun, J. H., and Kim, G. H., “Complete Stress-Strain Model of Unconfined Concrete Generalized by Compressive Strength and Unit Weight,” ACI Material Journal, Accepted, 2013.Google Search
15 
15.Sawyer, H. A., “Design of Concrete Frames for Two Failure Stages,” Proceedings of the International Symposium on Flexural Mechanics of Reinforced Concrete, ASCE- ACI, MI, 1964, pp. 405-431.Google Search
16 
16.Mattock, A. H., “Discussion of 'Rotational Capacity of Reinforced Concrete Beams' by W. G. Corley,” Journal of the Structural Division, ASCE, Vol. 93, No. ST2, 1967, pp. 519-522.Google Search
17 
17.Bohl, A. and Adebar, P., “Plastic Hinge Lengths in High-Rise Concrete Shear Walls,” ACI Structural Journal, Vol. 108, No. 2, 2011, pp. 148-157.Google Search
18 
Google Search
19 
Google Search