Mobile QR Code QR CODE
Export citation EndNote
1 
1.Krauthammer, T., Modern Protective Structures, CRC Press, 2008.Google Search
2 
2.Biggs, J. M., Introduction to Structural Dynamics, McGraw- Hill, New York, 1964, pp. 3-26.Google Search
3 
3.Dusenberry, D. O., Handbook for Blast-Resistant Design of Buildings, John Wiley & Sons, 2010.DOI
4 
4.Schenker, A., Anteby, I., Gal, E., Kivity, Y., Nizri, E., Sadot, O., Michaelis, R., Levintant, O., and Ben-Dor, G., “Full-scale Field Tests of Concrete Slabs subjected to Blast Loads,” International Journal of Impact Engineering, Vol. 35, No. 3, 2008, pp. 184-198.DOI
5 
5.Silva, P. F. and Lu, B., “Improving the Blast Resistance Capacity of RC Slabs with Innovative Composite Materials,” Composite Part B: Engineering, Vol. 38, No. 5-6, 2007, pp. 523-534.DOI
6 
6.Quintero R., Wei J., Galati N., and Nanni, A., “Failure Modeling of Bridge Components Subjected to Blast Loading Part II: Estimation of the Capacity and Critical Charge,” International Journal of Concrete Structures and Materials, Vol. 1, No. 1, 2007, pp. 29-36.DOI
7 
7.Kim, H. J., Nam, J. W., Kim, S. B., Kim, J. H., and Byun, K. J., “Analytical Evaluations of the Retrofit Performances of Concrete Wall Structures Subjected to Blast Load”, Journal of the Korea Concrete Institute, Vol. 19, No. 2, 2007, pp. 241-250.DOI
8 
8.Ha, J. H., Yi, N. H., Kim, S. B., Choi, J. K., and Kim, J. H., “Experimental Study on Blast Resistance Improvement of RC Panels by FRP Retrofitting”, Journal of the Korea Concrete Institute, Vol. 22, No. 1, 2010, pp. 93-102.DOI
9 
9.Patterns of Global Terrorism 2003, United States Department State, 2004, pp. 179.Google Search
10 
10.Bank, L. C., Composites for Construction: Structural Design with FRP Materials, John Wiley & Sons, NJ, USA, 2006, pp. 214-271.Google Search
11 
11.Teng, J. G., Chen, J. F., Smith, S. T., and Lam, L., FRP-Strengthened RC Structures, John Wiley & Sons, West Sussex, England, 2002, pp. 31-46.Google Search
12 
12.Wu, C., Oehlers, D. J., Rebentrost, M., Leach, J., and Whittaker, A. S., “Blast Testing of Ultra-high Performance Fibre and FRP-retrofitted Concrete Slabs,” Engineering Structures, Vol. 31, No. 9, 2009, pp. 2060-2069.DOI
13 
13.Min, K. H., Shin, H. O., Yoo, D. Y., and Yoon, Y. S., “Flexural and Punching Behaviors of Concrete Strengthening with FRP Sheet and Steel fibers under Low-Velocity Impact Loading”, Journal of the Korea Concrete Institute, Vol. 23, No. 1, 2011, pp. 31-38.DOI
14 
14.Lee, J. Y., Kim, M. H., Min, K. H., Yoon, Y. S., “Analysis of Behaviors of Concrete Strengthened with FRP Sheets and Steel Fibers under Low-Velocity Impact Loading”, Journal of the Korea Institute for Structural Maintenance Inspection, vol. 15, No. 4, 2011, pp. 155-164.DOI
15 
15.TM5-1300/AFR 88-2/NAVFAC P-39, Structures to Resist the Effects of Accidental Explosions, Joint Departments of the Army, Air Force and Navy Washington, DC, November, 1990, TMCD Version.Google Search
16 
16.Unified Facilities Criterion (UFC 4-010-01), DoD Minimum Antiterrorism Standards for Buildings, Washington, 31 July 2002.Google Search
17 
17.TM5-855-1/AFPAM32-1147/NAVFACP-1080/DAHS CWEMAN-97, Design and Analysis of Hardened Structures to Conventional Weapons Effects, Joint Departments of the Army, Air Force, Navy and the Defense Special Weapons Agency, Washington, DC, December 1997.Google Search
18 
18.Yamaguchi, M., Murakami, K., Takeda, K., and Mitsui, Y., “Blast Resistance of Polyethylene Fiber Reinforced Concrete to Contact Detonation,” Journal of Advanced Concrete Technology, Vol. 9, No. 1, 2011, pp. 63-71.DOI
19 
19.Lonnquist, L., “The Effects of High Explosives in Contact with Reinforced Concrete Plates,” Proceedings of the 6th International Symposium Interaction of Nonnuclear Munitions with Structures, Panama City, USA, 1993, pp. 262-266.Google Search
20 
20.Kraus, D., Roetzer, J., and Thoma, K., “Effect of High Explosive Detonations on Concrete Structures,” Nuclear Engineering and Design, Vol. 150, No. 2-3, 1994, pp. 309-314.DOI
21 
21.Wang, Z. L., Konietzky, H., and Huang, R. Y., “Elastic- Plastic-Hydrodynamic Analysis of Crater Blasting in Steel Fiber Reinforced Concrete,” Theoretical and Applied Fracture mechanics, Vol. 52, No. 2, 2009, pp. 111-116.DOI
22 
22.Saatci, S. and Vecchio F. J., “Effects of Shear Mechanism on Impact Behavior,” ACI Structure Journal, Vol. 106, No. 1, 2009, pp. 78-86.Google Search
23 
23.Chen, C. C. and Li, C. Y., “Punching Shear Strength of Reinforced Concrete Slabs Strengthened with Glass Fiber Reinforced Polymer Laminates,” ACI Structural Journal, Vol. 102, No. 4, 2005, pp. 535-542.Google Search
24 
24.Yoo, D. Y., Min, K. H., Lee, J. Y., and Yoon, Y. S., “Enhancement of Impact Resistance of Layered Steel Fiber Reinforced High Strength Concrete Beam”, Journal of the Korea Concrete Institute, Vol. 24, No. 4, 2012, pp. 369-379.DOI
25 
25.Wang, Z. L., Wu, L. P., and Wang, J. G., “A Study of Constitutive Relation and Dynamic Failure for SFRC in Compression,” Construction and Building Materials, Vol. 24, No. 8, 2010, pp. 1358-1363.DOI