Mobile QR Code QR CODE
Export citation EndNote
1 
1.Park, H. G., Baek, J. W., Lee, J. H., and Shin, H. M., “Cyclic Loading Test for Shear Strength of Low-rise Reinforced Concrete Walls With Grade 550 MPa Bars”, ACI Structural Journal, Vol.112, No.3, 2015, pp.299-310.DOI
2 
2.Cheon, J. H., Seong, D. J., Cho, H. J., Cho, J. Y., and Shin, H. M., “Nonlinear Finite Element Analysis of the Reinforced Concrete Panel using High-Strength Reinforcing Bar”, Journal of the Korea Concrete Institute, Vol.27, No.5, 2015, pp. 481-488.DOI
3 
3.Baek, J. W., and Park, H. G., “Shear-Friction Strength of RC Walls With Grade 550 MPa Bars”, Proceedings of the Tenth Pacific Conference on Earthquake Building an Earthquake-Resilient Pacific, Sydney, Australia, 2015, pp.180-188.Google Search
4 
4.Birkeland, P. W., and Birkeland, H. W., “Connections in Precast Concrete Constructions”, ACI Structural Journal, Vol.63, No.3, 1966, pp.345-368.Google Search
5 
5.Korea Concrete Institute, Concrete Structure Design Code and Commentary, Kimoondang, 2012.Google Search
6 
6.ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, American Concrete Institute, Farmington Hills, 2014, p.520.Google Search
7 
7.ACI Committee 349, Code Requirements for Nuclear Safety- Related Concrete Structures (ACI 349-13) and Commentary, American Concrete Institute, Farmington Hills, 2014, p. 200.Google Search
8 
8.Tassios, T. P., and Vintzeleou, E. N., “Concrete to Concrete Friction”, Journal of Structural Engineering, ASCE, Vol.113, No.4, 1987, pp.832-849.DOI
9 
9.Migeum, C., Kim, Y. J., Yun, G. J., Thomas, G. H., and Shirley, D., “Cyclic Shear-Friction Constitutive Model for Finite Element Analysis of Reinforced Concrete Membrane Elements”, ACI Structural Journal, Vol.108, No.3, 2011, pp.324-331.Google Search
10 
10.Song, J. G., Choi, J. Y., and Kim, J. H., “The Shear Friction Mode of Slab-Column Connections”, Journal of the Korea Concrete Institute, Vol.16, No.2, 2004, pp.79-82.Google Search
11 
11.Loov, R. E., “Review of A23.3-94 simplified method of shear design and comparison with results using shear friction”, Canadian Journal of civil Engineering, Vol.25, No.3, 1998, pp.437-450.DOI
12 
12.Seong, D. J., Kim, T. H., Oh, M. S., and Shin, H. M., “Inelastic Performance of High-Strength Concrete Bridge Columns under Earthquake Loads”, Journal of Advanced Concrete Technology, Vol.9, No.2, 2011, pp.205-220.DOI
13 
13.Cheon, J. H., Kim, T. H., Lee, B. J., Lee, J. H., and Shin, H. M., “Inelastic Behavior and Ductility Capacity of Circular Hollow Reinforced Concrete Bridge Piers under Earthquake”, Magazine of Concrete Research, Vol.64, No.10, 2012, pp. 919-930.DOI
14 
14.Comite Euro-International du Beton, CEB-FIP Model Code 2010, Thomas Telford, London, 2013, pp.176-183.Google Search
15 
15.Li, B., Maekawa, K., and Okamura, H., “Contact Density Model for Stress Transfer across Cracks in Concrete”, Journal of the Faculty of Engineering, Vol.40, No.1, 1989, pp.9-52.Google Search
16 
16.Randl, N., “Design recommendations for interface shear transfer in fib Model Code 2010”, The Fib Model Code for Concrete Structures 2010, Vol.14, No.3, 2013, pp.230-241.Google Search