ASTM F 2792-12 (2015) Standard Terminology for Additive Manufacturing Technologies.

B. Lothenbach, A. (2007) Gruskovnjak, Hydration of Alkali-activated Slag: Thermodynamic Modelling. Advances in Cement Research 19, 81-92.

Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., and Pambaguian, L. (2014) Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology, Acta Astronaut 93, 430-450.

Gibbons, G. J., Williams, R., Purnell, P., and Farahi, E., (2010) 3D Printing of Cement Composites. Advances in Applied Ceramics 109, 287-290.

Khoshnevis, B., Hwang, D., Yao, K. -T., and Yeh, Z. (2006) Mega-scale Fabrication by Contour Crafting. International Journal of Industrial and Systems Engineering 1(3), 301-320.

Lim, S., Le, T., Webster, J., Buswell, R., Austin, S., Gibb, A., and Thorpe, T., (2009) Fabricating construction components using layer manufacturing technology (GICC 09) Paper presented at the Global Innovation in Construction Conference, Loughborough University, Leicestershire, UK, 13-16 September.

Maier, A. -K., Dezmirean, L., Will, J., and Greil, P. (2010) Three-dimensional Printing of Flash-setting Calcium Aluminate Cement. Journal of Materials Science 46(9), 2947-2954.

Park, K. M., Cho, Y. K., and Shin, D. C. (2017) Effects of Magnesium and Sulfate Ions on the Sulfate Attack Resistance of Alkali-activated Materials. Journal of the Korea Concrete Institute 29(4), 415-424. (In Korean)

Rael, R. and San Fratello, V. (2011) Developing concrete polymer building components for 3D printing, Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture, (ACADIA 11), Banff, Canada, University of Calgary, 13-16 October, 2011, 152-157.

Richardson, I. G., Brough, A. R., Groves, G. W., and Dobson, C. M. (1994) The Characterization of Hardened Alkali Activated Blast Furnace Slag Pastes and the Nature of the Calcium Silicate Hydrate (C-S-H) Phase. Cement and Concrete Research 24, 813-829.