Mobile QR Code QR CODE
Export citation EndNote

References

1 
1998, Committee Report on Fiber Reinforced Shotcrete (ACI 506.1R-98), USA, Michigan: American Concrete Institute (ACI)Google Search
2 
1993, Guide for Specifying, Proportioning, Mixing, Placing, and Finishing Steel Fiber Reinforced Concrete, ACI Material Journal, Vol. 90, No. 1, pp. 94-103Google Search
3 
2016, Standard Specification for Steel Fibers for Fiber-Reinforced Concrete, USA, Pennsylvania: ASTM InternationalGoogle Search
4 
2015, Standard Test Method for Flow of Hydraulic Cement Mortar, USA, Pennsylvania: ASTM InternationalGoogle Search
5 
2015, Standard Test Method for Flow of Hydraulic Cement Mortar, USA, Pennsylvania: ASTM InternationalGoogle Search
6 
2018, Standard Test Method for Flexural Strength of Hydraulic-cement Mortars, USA, Pennsylvania: ASTM InternationalGoogle Search
7 
2018, Standard Test Method for Compressive Strength of Hydraulic-cement Mortars (Using Portions of Prisms Broken in Flexure), USA, Pennsylvania: ASTM InternationalGoogle Search
8 
Blunt J. D., Ostertag C. P., 2009, Deflection Hardening and Workability of Hybrid Fiber Composites, ACI Material Journal, Vol. 106, No. 3, pp. 265-272Google Search
9 
Choi H. B., Kim J. M., 2019, Fundamental Research on Reactivity of Silica Source in the Rapidly Cured Inorganic Micro-Defect-Free (MiDF) Concrete, Journal of the Korean Recycled Construction Resources Institute, Vol. 7, No. 2, pp. 166-173DOI
10 
Choi S. M., Kim J. M., Han D. Y., Kim J. H., 2016, Hydration Properties of Ladle Furnace Slag Powder Rapid Cooled by Air, Construction and Building Materials, Vol. 113, pp. 682-690DOI
11 
2006, Fibers for Concrete - Part 1: Steel Fibers - Definition, Specifications and Conformity, Ireland, Dublin: National Standards Authority of Ireland (NSAI)Google Search
12 
Fuente-Alonso J. A., Ortega-López V., Skaf M., Aragón A., San-José J. T., 2017, Performance of Fiber-reinforced EAF Slag Concrete for Use in Pavement, Construction and Building Materials, Vol. 149, pp. 629-638DOI
13 
Hsie M., Tu C., Song P. S., 2008, Mechanical Properties of Polypropylene Hybrid Fiber Reinforced Concrete, Materials Science and Engineering: A, Vol. 494, No. 1-2, pp. 153-157DOI
14 
Juenger M. C. G., Winnerfeld F., Provis J. L., Ideker J. H., 2011, Advances in Alternative Cementitious Binders, Cement and Concrete Research, Vol. 41, No. , pp. 1232-1243DOI
15 
Kang S. T., 2017, An Analytical Study on the Tensile Behavior of UHPC according to Aspect Ratio and Orientation Distribution of Steel Fibers, Journal of the Korea Concrete Institute, Vol. 29, No. 6, pp. 581-588Google Search
16 
Kazmi S. M. S., Munir M. J., Wu Y. F., Patnaikuni I., Zhou Y., Xing F., 2019, Axial Stress-strain Behavior of Macro- synthetic Fiber Reinforced Recycled Aggregate Concrete, Cement and Concrete Composites, Vol. 97, pp. 341-356DOI
17 
Kim J. M., Choi S. M., Han D. Y., 2016, Improving the Mechanical Properties of Rapid Air Cooled Ladle Furnace Slag Powder by Gypsum, Construction and Building Materials, Vol. 127, pp. 93-101DOI
18 
Lee J. H., Cho B. S., Kim J. S., Cho B. G., Kim H. S., 2016, Effect of the Combination of Point Loads on the Design Flexural Capacity for Fiber Reinforced Concrete Floor Slab, Journal of the Korean Recycled Construction Resources Institute, Vol. 4, No. 1, pp. 47-54DOI
19 
Lee Y. H., Lee S. W., Youn J. R., Chung K. S., Kang T. J., 2002, Characterization of Fibre Orientation in Short Fibre Reinforced Composites with an Image Processing Technique, Materials Research Innovations, Vol. 6, No. 2, pp. 65-72Google Search
20 
Li M., Kim J. M., 2019, A Review of Nanomaterials in Cement-based Composite, Journal of the Korean Recycled Construction Resources Institute, Vol. 7, No. 2, pp. 174-186Google Search
21 
Mudadu A., Tiberti C., Germano F., Giovanni A. P., Morbi A., 2018, The Effect of the Orientation on the Post-cracking Behavior of Steel Fiber Reinforced Concrete under Bending and Uniaxial Tensile Test, Cement and Concrete Composites, Vol. 93, pp. 274-288DOI
22 
Nguyen W., William Trono W., Panagiotou M., Ostertag C. P., 2017, Seismic Response of a Rocking Bridge Column using a Precast Hybrid Fiber-reinforced Concrete (HyFRC) Tube, Composite Structures, Vol. 174, pp. 252-262DOI
23 
Orbe A., Cuadrado J., Losada R., Rojí E., 2012, Framework for the Design and Analysis of Steel Fiber Reinforced Self- compacting Concrete Structures, Construction and Building Materials, Vol. 35, pp. 676-686DOI
24 
Sabnis G. M., 2015, Green Building with Concrete, Sustainable Design and Construction, 2nd ed. CRC Press, Vol. 330Google Search
25 
Shah S. P., Ferrara L., Kwon S. H., 2010, Recent Research on Self-consolidating Steel Fiber-reinforced Concrete, ACI Special Publication, Vol. 272, pp. 109-134Google Search
26 
Soltanzadeh F., Barros J. A. O., Santos R. F. C., 2015, High Performance Fiber Reinforced Concrete for Shear Reinforcement: Experimental and Numerical Research, Construction and Building Materials, Vol. 77, pp. 94-109DOI
27 
Song Q., Yu R., Shui Z., Wang X., Rao S., Lin Z., 2018, Optimization of Fiber Orientation and Distribution for a Sustainable Ultra-high Performance Fiber Reinforced Concrete (UHPFRC): Experiments and Mechanism Analysis, Construction and Building Materials, Vol. 169, pp. 8-19DOI
28 
Yao W., Li J., Wu K., 2003, Mechanical Properties of Hybrid Fiber-reinforced Concrete at Low Fiber Volume Fraction, Cement and Concrete Research, Vol. 33, No. 1, pp. 27-30DOI
29 
Yazici S., Inan G., Tabak V., 2007, Effect of Aspect Ratio and Volume Fraction of Steel Fiber on the Mechanical Properties of SFRC, Construction and Building Materials, Vol. 21, No. 6, pp. 1250-1253DOI
30 
Zollo R. F., 1997, Fiber-reinforced Concrete: An Overview After 30 Years of Development, Cement and Concrete Composite, Vol. 19, No. 2, pp. 107-122DOI