Mobile QR Code QR CODE
Export citation EndNote

References

1 
ACI Committee 318 , 2005, Building Code Requirements for Reinforced Concrete (ACI 318-08) and Commentary (ACI 318R-08), Farmington Hills, MI; American Concrete Institute (ACI)Google Search
2 
ACI committee 523 , 2009, Guide for Design and Construction with Autoclaved Aerated Concrete Panels (ACI 523.4R), Farmington Hills, MI; American Concrete Institute (ACI), pp. 1-60Google Search
3 
Argudo J., 2003, Evaluation and Synthesis of Experimental Data for Autoclaved Concrete, Master’s Thesis. Department of Civil Engineering, The University of Texas at Austin, Austin, TXGoogle Search
4 
ASTM C109 , 2016, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), West Conshohocken, PA; ASTM InternationalGoogle Search
5 
ASTM C1329 , 2016, Standard Specification for Mortar Cement, West Conshohocken, PA; ASTM InternationalGoogle Search
6 
ASTM C1693-11 , 2017, Standard Specification for Autoclaved Aerated Concrete (AAC), West Conshohocken, PA; ASTM InternationalGoogle Search
7 
ASTM C270-14 , 2014, Standard Specification for Mortar for Unit Masonry, West Conshohocken, PA; ASTM InternationalGoogle Search
8 
ASTM C78 , 2017, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), West Conshohocken, PA; ASTM InternationalGoogle Search
9 
Byun K. J., Song H. W., Park S. S., 1997, Development of Lightweight Foamed Concrete Using Polymer Foam Agent, Journal of the Korea Concrete Institute (In Korean), Vol. 9, No. 1, pp. 165-172Google Search
10 
Cho H. J., Song H. W., Byun K. J., 1997, Micromechanics- based Evaluation of Elastic Modulus of Lightweight Foamed Concrete, Journal of the Korea Concrete Institute (In Korean), Vol. 9, No. 4, pp. 125-135Google Search
11 
Dembowski J., 2001, A Study of the Material Properties and Structural Behavior of Plain and Reinforced AAC Components, Master’s Thesis. Department of Civil Engineering, University of Alabama at Birmingham, Birmingham, AL.Google Search
12 
Deutsches Institut für Normung (DIN) , 2013, Prefabricated Reinforced Components of Autoclaved Aerated Concrete (DIN EN 12602: 2013), Berlin, German; German Institute for Standardisation, DINGoogle Search
13 
Korea Agency for Technology and Standards (KATS) , 2012, Autoclaved Lightweight Aerated Concrete Block (KS F 2701), Seoul, Korea: Korea Standard Association (KSA) (In Korean)Google Search
14 
Masonry Standards Joint Committee (MSJC) , 2013, Building Code Requirements and Specification for Masonry Structures (TMS 402-13/ACI 530-13/ASCE 5-13), Longmont, CO USA; The Masonry Society, MSJC. 1-382Google Search
15 
Ministry of Land, Infrastructure and Transport (MOLIT) , 1997, Structural Design Guideline for Autoclaved Lightweight Concrete Block, Sejong, Korea; MOLIT (In Korean)Google Search
16 
Nederlands Normalisatie-Instituut (NNI) , 1987, Gasbetonproducten- Aerated Concrete Units (NEN 3838:1987), Delf, Netherland; NNI standard. 1-16Google Search
17 
Park S. S., Song H. W., Byun K. J., 1997, Mechanical Propoerties of Lightweight Foamed Concrete Using Polymer Foam Agent, Journal of the Korea Concrete Institute (In Korean), Vol. 9, No. 1, pp. 173-181Google Search
18 
RILEM , 1992, Autoclaved Aerated Concrete - Properties, Testing, and Design, London; New York; E & FN Spon, RILEM Technical Committees 78-MCA and 51-ALCGoogle Search
19 
Snow C. A., 1999, A Comprehensive Study of the Material Properties and Structural Behavior of AAC Products, Master’s Thesis. Department of Civil Engineering, University of Alabama at Birmingham, Birmingham, ALGoogle Search
20 
Tanner J. E., 2003, Design Provisions for Autoclaved Aerated (AAC) Concrete Structural Systems, Ph.D. Dissertation, Department of Civil Engineering, The University of Texas at Austin, Austin, TXGoogle Search