Mobile QR Code QR CODE
Export citation EndNote

References

1 
Balan T. A., Filippou F. C., Popov E. P., 1998, Hysteretic Model of Ordinary and High-Strength Reinforcing Steel, ASCE Journal of Structural Engineering, Vol. 124, No. 3, pp. 288-297DOI
2 
Chai Y. H., Elayer T. D., 1999, Lateral Stability of Reinforced Concrete Columns under Axial Reversed Cyclic Tension and Compression, ACI Structural Journal, Vol. 96, No. 5, pp. 780-789Google Search
3 
Chung Y. S., Lee D. H., Ko S. H., Lee J. H., 2004, Seismic Performance Evaluation of Full-Size Non-Seismic Circular RC Bridge Piers with Longitudinal Steel Lap Splice, Journal of the Korea Concrete Institute, Vol. 16, No. 5, pp. 697-707DOI
4 
Dodd L. L., Restrepo-Posada J. I., 1995, Model for Predicting Cycle Behavior of Reinforcing Steel, ASCE Journal of Structural Engineering, Vol. 121, No. 3, pp. 433-445DOI
5 
Gomes A., Appleton J., 1997, Non-Linear Cyclic Stress- Strain Relationship of Reinforcing Bars including Bucking, Engineering Structures, Vol. 19, No. 10, pp. 822-826DOI
6 
Hsu T. T. C., 1993, Unified Theory of Reinforced Concrete, Boca Raton: CRC Press, pp. 205-206Google Search
7 
KATS , 2018, Method of Tensile Test for Metallic Materials (KS B 0802), Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA).Google Search
8 
Ko S. H., 2012, Seismic Performance of Square RC Column Confined with Spirals, Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 16, No. 5, pp. 88-97DOI
9 
Ko S. H., 2013, Seismic Performance and Flexural Over-Strength of Circular RC Column, Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 17, No. 5, pp. 49-58DOI
10 
Ko S. H., Lee J. H., 2010, Low Cycle Fatigue Model for Longitudinal Reinforcement, Journal of the Korea Concrete Institute, Vol. 22, No. 2, pp. 273-282DOI
11 
Ko S. H., Lee J. H., 2021, Ultimate Compression Strain Model for Confined Concrete of Circular RC Columns Subjected to Cyclic Lateral Loads, Journal of the Korea Concrete Institute, Vol. 33, No. 2, pp. 185-193Google Search
12 
Lee J. H., Ko S. H., 2010, Low Cycle Fatigue Behavior of Longitudinal Reinforcement, Journal of the Korea Concrete Institute, Vol. 22, No. 2, pp. 263-271DOI
13 
Lee J. H., Bae S. Y., Yun S. K., 2001, Seismic Performance Test of Spirally Reinforced Bridge Columns, KSCE Journal of Civil Engineering, Vol. 21, No. 1-a, pp. 109-121Google Search
14 
Lee J. H., Ko S. H., Lee D. H., Cheong Y. S., 2004, Flexure-Shear Behavior of Circular Bridge Columns under Cyclic Lateral Loads, Journal of the Korea Concrete Institute, Vol. 16, No. 6, pp. 823-832DOI
15 
Maekawa K., Pimanmas A., Okamura H., 2003, Nonlinear Mechanics of Reinforced Concrete, New York: Spon Press, pp. 682-711Google Search
16 
Mander J. B., Priestley M. J. N., Park R., 1988, Theoretical Stress-Strain Model for Confined Concrete, Journal of Structural Engineering, Vol. 114, No. 8, pp. 1804-1826DOI
17 
Mau S. T., 1989, Effect of Tie Spacing on Inelastic Buckling of Reinforcing Bars, ACI Structral Journal, Vol. 87, No. 6, pp. 671-677Google Search
18 
Monti G., Nuti C., 1992, Non-Linear Cyclic Behavior of Reinforcing Bars Including Buckling, ASCE Journal of Structural Engineering, Vol. 118, No. 12, pp. 3269-3284DOI
19 
Rodriguez M. E., Botero J. C., Villa J., 1999, Cyclic Stress-Strain Behaviour of Reinforcing Steel Including Effect of Buckling, ASCE Journal of Structural Engineering, Vol. 125, No. 6, pp. 605-612DOI
20 
Roufaiel M. S. L., Meyer C., 1987, Analytical Modeling of Hysteretic Behavior of R/C Frames, ASCE Journal of Structural Engineering, Vol. 113, No. 3, pp. 429-444DOI
21 
Shima H., Chou L. L., Okamura H., 1987, Micro Model for Bond Behavior in Reinforced Concrete, Journal of the Engineering University of Tyoko (B, Vol. 39, No. 2, pp. 133-194Google Search
22 
Shin H. M., 1988, Finite Element Analysis of Reinforced Concrete Members Subjected to Lead Reversals, Ph.D. Thesis. University of TokyoGoogle Search
23 
Singh A., Gerstle K. H., Tulin L. G., 1965, The Behavior of Reinforcing Steel under Reversed Loading, Materials Research and Standards, Vol. 5, No. 1, pp. 1-12Google Search