Mobile QR Code QR CODE
Export citation EndNote

References

1 
Choi, S.-M., Kim, J.-M., and Koo, J.-S. (2021) Reaction Characteristics of the CAC with Various Gypsum Type and Mixing Ratio. Resources Recycling 30(1), 83-91.DOI
2 
Etxeberria, M., Fernandez, J. M., and Limeira, J. (2016) Secondary Aggregates and Seawater Employment for Sustainable Concrete Dyke Blocks Production: Case Study. Construction and Building Materials 113, 586-595.DOI
3 
Fu, Q., Wu, Y., Zhang, N., Hu, S., Yang, F., Lu, L., and Wang, J. (2020) Durability and Mechanism of High-Salt Resistance Concrete Exposed to Sewage-Contaminated Seawater. Construction and Building Materials 257, 119534.DOI
4 
Gartner, E., and Gaidis, J. (1989) Materials Science of Concrete. Westerville: The American Ceramic Society: 95-125.URL
5 
Gu, P., and Beaudoin, J. (1997) A Conduction Calorimetric Study of Early Hydration of Ordinary Portland Cement/High Alumina Cement Pastes. Journal of Materials Science 32(14), 3875-3881.DOI
6 
Güllü, H., Canakci, H., and Al Zangana, I. F. (2017) Use of Cement-Based Grout with Glass Powder for Deep Mixing. Construction and Building Materials 137, 12-20.DOI
7 
Hong, K.-N., Jung, J.-Y., and Han, S.-H. (2011) Material Properties of Grout Using Alumina Cement and Anhydrite. Journal of the Korean Society of Safety 26(5), 59-64.DOI
8 
Husem, M., and Gozutok, S. (2005) The Effects of Low Temperature Curing on the Compressive Strength of Ordinary and High-Performance Concrete. Construction and Building Materials 19(1), 49-53.DOI
9 
Jawed, I., Skalny, J., and Young, J. F. (1983) Structure and Performance of Cements [red. P. Barnes]. Appl. Science Publ., London: 237.URL
10 
KATS (2019a) Hydraulic-Cement Grout (Nonshrink) (KS F 4044). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)URL
11 
KATS (2019b) Standard Test Method for Polymer-Modified Cement Mortar (KS F 2476). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)URL
12 
Kaushik, S., and Islam, S. (1995) Suitability of Sea Water for Mixing Structural Concrete Exposed to a Marine Environment. Cement and Concrete Composites 17(3), 177-185.DOI
13 
KMA (2018) Average Annual Water Temperature Deviation by Water Depth in Korea. Daejeon, Korea; Korea Meteorological Administration (KMA).URL
14 
Lee, S.-A., and Ann, K.-Y. (2018) Evaluation on Sulfate Resistance of the High-Durablility Culvert Using CAC and GGBS. Journal of the Korea Concrete Institute 30(5), 465-472. (In Korean)DOI
15 
Li, L., Gong, W., and Li, J. (2020) Service Life of Prestressed High-Strength Concrete Pile in Marine Environment considering Effects of Concrete Stratification and Temperature. Construction and Building Materials 253, 119233.DOI
16 
Li, S., Sha, F., Liu, R., Zhang, Q., and Li, Z. (2017) Investigation on Fundamental Properties of Microfine Cement and Cement- Slag Grouts. Construction and Building Materials 153, 965- 974.DOI
17 
Lim, M.-K., and Ha, S.-S. (2015) Basic Study on Development of Ultra-High Strength Grout for Offshore Wind Turbines. KIEAE Journal 15(1), 155-160.DOI
18 
Liu, Y., and Chen, B. (2019) Research on the Preparation and Properties of a Novel Grouting Material Based on Magnesium Phosphate Cement. Construction and Building Materials 214, 516-526.DOI
19 
Lorenzo, M., Goni, S., and Guerrero, A. (2003) Role of Aluminous Component of Fly Ash on the Durability of Portland Cement-Fly Ash Pastes in Marine Environment. Waste Management 23(8), 785-792.DOI
20 
MacLeay, A. J., and Hodgson, T. (2019) Beatrice Offshore Wind Project, Wind Turbine Generator Foundation Design. Offshore Technology Conference, OnePetro.DOI
21 
Mehta, P. K., and Monteiro, P. J. (2014) Concrete: Microstructure, Properties, and Materials. McGraw-Hill Education.URL
22 
Mohammed, T. U., Hamada, H., and Yamaji, T. (2004) Performance of Seawater-Mixed Concrete in the Tidal Environment. Cement and Concrete Research 34(4), 593-601.DOI
23 
Moon, H., Lee, S., and Kim, H. (2001) Evaluation on the Deterioration and Resistance of Cement Matric due to Seawater Attack. Journal of the Korea Concrete Institute 13(2), 175- 183. (In Korean)URL
24 
Park, J.-H., and Ki, K.-K. (2017) Fundamental Properties of Alumina Cement Mortar by Insulation Curing Method under Low Temperature. Journal of the Korea Institute of Building Construction 17(5), 419-427. (In Korean)DOI
25 
Qu, F., Li, W., Dong, W., Tam, V. W., and Yu, T. (2021a) Durability Deterioration of Concrete under Marine Environment from Material to Structure: A Critical Review. Journal of Building Engineering 35, 102074.DOI
26 
Qu, F., Li, W., Wang, K., Tam, V. W., and Zhang, S. (2021b) Effects of Seawater and Undesalted Sea Sand on the Hydration Products, Mechanical Properties and Microstructures of Cement Mortar. Construction and Building Materials 310, 125229.DOI
27 
Xu, J., Chen, J., Lu, D., Xu, Z., and Hooton, R. D. (2019) Effect of Dolomite Powder on the Hydration and Properties of Calcium Sulfoaluminate Cements with Different Gypsum Contents. Construction and Building Materials 225, 302-310.DOI
28 
Yiğiter, H., Yazıcı, H., and Aydın, S. (2007) Effects of Cement Type, Water/Cement Ratio and Cement Content on Sea Water Resistance of Concrete. Building and Environment 42(4), 1770-1776.DOI
29 
Zhou, J., Zheng, K., Liu, Z., and He, F. (2019) Chemical Effect of Nano-Alumina on Early-Age Hydration of Portland Cement. Cement and Concrete Research 116, 159-167.DOI