Mobile QR Code QR CODE
Export citation EndNote

References

1 
ACI Committee 544 (2018) Guide to Design with Fiber-Reinforced Concrete (ACI 544.4R-18). Farmington Hills, MI, USA: American Concrete Institute (ACI).URL
2 
ASTM D4018-17 (2017) Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows. West Conshohocken, PA, USA: ASTM International.URL
3 
Betterman, L. R., Ouyang, C., and Shah, S. P. (1995) Fiber-Matrix Interaction in Microfiber-Reinforced Mortar. Advanced Cement Based Materials 2(2), 53-61.DOI
4 
Dhand, V., Mittal, G., Rhee, K. Y., Park, S. J., and Hui, D. (2015) A Short Review on Basalt Fiber Reinforced Polymer Composites. Composites Part B: Engineering 73, 166-180.DOI
5 
Fiore, V., Scalici, T., Di Bella, G., and Valenza, A. (2015) A Review on Basalt Fibre and Its Composites. Composites Part B: Engineering 74, 74-94.DOI
6 
Han, C. G., Park, J. S., Jung, W. T., and Jeon, K. N. (2010) Effect of Fiber Types on Fundamental Properties of Pavement Concrete. Journal of the Korea Concrete Institute 22(4), 473-479. (In Korean)DOI
7 
Heo, G. H., Song, K. C., Park, J. G., Park, J. H., and Jun, H. M. (2020) Effect of Mechanical Properties of SiO2 Coated Carbon Fiber Reinforced Mortar Composites. Journal of the Korea Concrete Institute 32(1), 65-76. (In Korean)DOI
8 
High, C., Seliem, H. M., EI-Safty, A., and Rizkalla, S. H. (2015) Use of Basalt Fibers for Concrete Structures. Construction and Building Materials 96, 37-46.DOI
9 
KATS (2016) Portland Cement (KS L 5201). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)URL
10 
Katz, A., and Li, V. C. (1996) A Special Technique for Determining the Bond Strength of Micro-Fibres in Cement Matrix by Pullout Test. Journal of Materials Science Letters 15, 1821- 1823.URL
11 
Lu, M., Xiao, H., Liu, M., Li, X., Li, H., and Li, S. (2018) Improved Interfacial Strength of SiO2 Coated Carbon Fiber in Cement Matrix. Cement and Concrete Composites 91, 21-28.DOI
12 
Manikandan, V., Winowlin Jappes, J. T., Suresh Kumar, S. M., and Amuthakkannan, P. (2012) Investigation of the Effect of Surface Modifications on the Mechanical Properties of Basalt Fibre Reinforced Polymer Composites. Composites: Part B 43(2), 812-818.DOI
13 
Militký, J., Kovačič, V., and Bajzík, V. (2007) Mechanical Properties of Basalt Filaments. Fibres & Textiles in Eastern Europe 15(5-6), 49-53.URL
14 
Monaldo, E., Nerilli, F., and Vairo, G. (2019) Basalt-Based Fiber-Reinforced Materials and Structural Applications in Civil Engineering. Composite Structures 214, 246-263.DOI
15 
Naik, D. L., Sharma, A., Chada, R. R., Kiran, R., and Sirotiak, T. (2019) Modified Pullout Test for Indirect Characterization of Natural Fiber and Cementitious Matrix. Interface Properties. Construction and Building Materials 208, 381-393.DOI
16 
Pi, Z., Xiao, H., Du, J., Liu, M., and Li, H. (2019) Interfacial Microstucture and Bond Strength of Nano-SiO2-Coated Steel Fibers in Cement Matrix. Cement and Concrete Composites 103, 1-10.DOI
17 
Scrivener, K. L., Crumbie, A. K., and Laugesen, P. (2004) The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete. Interface Science 12, 411-421.DOI
18 
Won, J. P., and Park, C. G. (2000) Effects of Specialty Cellulose on Improvement of Flexural Performance and Control of Cracking of Concrete. Journal of the Korea Concrete Institute 12(2), 89-98. (In Korean)URL
19 
Zheng, Y., Sun, D., Feng, Q., and Peng, Z. (2022) Nano-SiO2 Modified Basalt Fiber for Enhancing Mechanical Properties of Oil Well Cement. Colloids and Surfaces A: Physicochemical and Engineering Aspects 648, 128900.DOI