Mobile QR Code QR CODE
Export citation EndNote

References

1 
Ahmad, J., Garcia, R. M., Algarni, S., Gil, J. P., Alqahtani, T., and Irshad, K. (2022) Characteristics of Sustainable Concrete with Partial suBSGtitutions of Glass Waste as a Binder Material. International Journal of Concrete Structures and Materials 16(21).DOI
2 
Amer, I., Kohail, M., Feky, M. S. E., Rashad, A., and Khalaf, M. (2023) Realistic Evaluation of Reinforcement Bond Strength in Alkali-Activated Slag Concrete Exposed to Elevated Temperature. International Journal of Concrete Structures and Materials 17(36).DOI
3 
ASTM C 1202 (2019) Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride ion Penetration. West Conshohocken, PA; ASTM International.URL
4 
ASTM C 1753 (2021) Standard Practice for Evaluation Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurement. West Conshohocken, PA; ASTM International.URL
5 
Bakri, A. M. M., Kamarudion, H., BinHussain, M., Nizar, I. K., Zarina, Y., and Rafiza, A. R. (2011) The Effect of Curing Temperature on Physical and Chemical Properites of Geopolymers. Physics Procedia 22, 286-291.DOI
6 
Bai, C., Deng, Y., Zhou, Q., Deng, G., Yang, T., and Yang, Y. (2022) Effect of Different Curing Methods on the Preparation of Carbonized High-titanium Slag Based Geopolymers. Construction and Building Materials 342. Part A, 128023.DOI
7 
Cevik, A., Alzeebaree, R., Humur, G., Nis, A., and Gulsan, M. E. (2018) Effect of Nano-silica on the Chemical Durability and Mechanical Performance of Fly Ash Based Geopolyemr Concrete. Ceramics International 44(11), 12253-12264.DOI
8 
Chalee, W., Soeurt, R., Pachana, P., and Songpiriyakij, S. (2021) Improvement of High-Volume Fly Ash Cementitious Material Using Single Alkali Activation. International Journal of Concrete Structures and Materials 15(44).DOI
9 
Cho, Y. K., Moon, G. D., La, J. M., and Jung, S. H. (2014) Effect of Curing Conditions on the Strength of Fly-ash Based Geopolymer. Journal of Korea Concrete Institute 26(4). 449-456. (In Korean)DOI
10 
Cho, Y. K., Yoo, S. W., Jung, S. H., Lee, K. M., and Kwon, S. J. (2017) Effect of Na2O Content, SiO2/Na2O Molar Ratio and Curing Conditions on the Compressive Strength of FA-based Geopolymer. Construction and Building Materials 145, 253-260.DOI
11 
Chofore, A. T., Mitikie, B. B., and Haile, A. T. (2022) Experimental Investigation on Bond, Microstructure and Durability of Expired Hardened Cement Blended with Ground Granulated Blast Furnace Slag as Partial Replacement of Cement in High-Strength Concrete. International Journal of Concrete Structures and Materials 16(70).DOI
12 
Choi, S. J., Kim, J. H., Bae, S. H., and Oh, T. G. (2021) Effect of Fly Ash on Compressive Strength, Drying Shrinkage, and Carbonation Depth of Mortar with Ferronickel-Slag Powder. Applied Sciences 11(3), 1037.DOI
13 
Choi, S. J., Kim, Y. U., Oh, T. G., and Cho, B. S. (2020) Compressive Strength, Chloride Ion Penetrability, and Carbonation Characteristic of Concrete with Mixed Slag Aggregate. Materials 13(4), 940.DOI
14 
Chouksey, A., Verma, M., Dev, N., Rahman, I., and Upreti, K. (2022) An Investigation on the Effect of Curing Conditions on the Mechanical and Microstructural Properties of the Geopolymer Concrete. Materials Research Express 9(5).DOI
15 
Durak, U., Ilkentapar, S., Karahan, O., Uzal, B., and Atis, C. D. (2021) A New Parameter Influencing the Reaction Kinetics and Properties of Fly Ash Based Geopolymer: A Pre-rest Period before Heat Curing. Journal of Building Engineering 35, 102023.DOI
16 
El-Feky, M. S., Kohail, M., El-Trm, A. M., and Serah, M. I. (2020) Effect of Microwave Curing as Compared with Conventional Regimes on the Performance of Alkali Activated Slag Pastes. Construction and Building Materials 233, 117268.DOI
17 
Gupta, A. (2021) Investigation of the Strength of Ground Granulated Blast Furncae Slag Based Geopolymer Composite with Silica Fume. Materials Today: Proceedings 44(1), 23-28.DOI
18 
He, R., Dai, N., and Wang, Z. (2020) Thermal and Mechanical Properties of Geopolymers Exposed to High Temperature: A Literature Review. Advances in Civil EngineeringDOI
19 
Heah, C. Y., Kamarudin, H., Bakri, A. M. M. A., Binhussain, M., Luqman, M., Nizar, I. K., Ruzaidi, C. M., and Liew, Y. M. (2011) Effect of Curing Profile on Kaolin-based Geopolymers. Physics Procedia 22, 305-311.DOI
20 
Hui, M. B., Zhu, H., Mix, C. X., Yan, H., and Yu, G. S. (2014) Effect of Curing Temperature on Geopolymerization of Metakaolin-based Geopolymers. Applied Clay Science 99, 144-148.DOI
21 
Jagadesh, P., Nagarajan, V., Karthik, P. T., and Karthik, A. K. (2022) Effect of Nano Titanium Dioxide on Mechanical Properties of Fly Ash and Ground Granulated Blast Furnace Slag Based Geopolymer Concrete. Journal of Building Engineering 61, 105235.DOI
22 
KATS (2011) Standard Test Method for Tensile Splitting Strength of Concrete (KS F 2423). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Stadard Association (KSA). (In Korean)URL
23 
KATS (2015) Standard Test Method for Length Change of Mortar and Concrete (KS F 2424). Seoul. Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Assocication (KSA). (In Korean)URL
24 
KATS (2017) Testing Method for Comrpessive Strength of Hydraulic Cement Mortars (KS L 5105). Seoul, Korea: Korea Agency for Technology and Standards(KATS), Korea Standard Association (KSA). (In Korean)URL
25 
KATS (2022) Aggregates for Concrete (KS F 2527). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)URL
26 
KATS (2023) Testing Method for Velocity of Ultrasonic Pulses to Conclude Compressive Strength of Concrete (KS F 2731). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)URL
27 
Khale, D., and Chaudhary, R. (2007) Mechanism of Geopolymerization and Factors Influencing Its Development: a Review. Journal of Materials Science 42, 729-746.DOI
28 
Kim, H. S., Lee, C. H., and Ann, K. Y. (2019) Feasibility of Ferronickel Slag Powder for Cementitious Binder in Concrete Mix. Construction and Building Materials 207, 693-705.DOI
29 
Kroehong, W., Sinsiri, T., and Jaturapitakkul, C. (2011) Effect of Palm Oil Fuel Ash Fineness on Packing Effect and Pozzolanic Reaction of Blended Cement Paste. Procedia Engineering 14, 361-369.DOI
30 
Kuenzel, C., Vandeperre, L. J., Eonatello, S., Boccaccini, A. R., and Cheeseman, C. (2012) Ambient Temperature Drying Shrinkage and Cracking in Metakaolin-Based Geopolymers. Journal of the American Ceramic Society 95(10), 3270- 3277.DOI
31 
Lee, J. I., and Choi, S. J. (2023) Mechanics and Durability Characteristics of Cement Mortar Using Cementitious Materials-based Capsule and Amorphous Metallic Fibers. Journal of the Architectural Institute of Korea 39(5), 207-214.DOI
32 
Lee, J. I., Bae, S. H., Kim, J. H., and Choi, S. J. (2022) Effect of Cementitious Materials on the Engineering Properties of Lightweight Aggregate Mortars Containing Recycled Water. Materials 15(5), 1967.DOI
33 
Li, X., Wang, Z., and Jiao, Z. (2013) Influence of Curing on the Strength Development of Calcium-Containing Geopolymer Mortar. Materials 6(11), 5069-5076.DOI
34 
Lim, C. Y., Jung, E. T., Lee, S. H., Jang, C. S., and Oh, C. W. (2020) Global Trend of Cement Production and Utilization of Circular Resources. Journal of Energy Engineering 29(3), 57-63.DOI
35 
Mayhoub, O. A., Mohsen, A., Alharbi, Y. R., Abadel, A. A., Habib, A. O., and Kohail, M. (2021) Effect of Curing Regimes on Chloride Binding Capacity of Geopolymer. Ain Shams Engineering Journal 12(4), 3659-3668.DOI
36 
Meng, Q., Wu, C., Su, Y., Li, J., and Pang, J. (2019) Experimental and Numerical Investigation of Blast Resistant Capacity of High Performance Geopolymer Concrete Panels. Composites Part B: Engineering 171, 9-19.DOI
37 
Mohajerani, A., Suter, D., Bailey, T. J., Song, T., Arularajah, A., Horpibulsuk, S., and Law, D. (2019) Recycling Waste Materials in Geopolymer Concrete. Clean Technologies and Environmental Policy 21, 493-515.DOI
38 
Nuruzzaman, M., Ahmad, T., Sarker, P. K., and Shaikh, F. U. A. (2023) Rheological Behaviour, Hydration, and Microstructure of Self-compacting Concrete Incorporation Ground Ferronickel Slag as Partial Cement Replacement. Journal of Building Engineering 68, 106127.DOI
39 
Ojha, A., Aggarwal, P., and Gupta, L. (2021) Curing Regimes Effect on the Strength Parameters of Geopolymer Concrete: A Short Review. Advances in Sustainable Construction Materials 651-657DOI
40 
Prusty, J. K., and Pradhan, B. (2020) Multi-response Optimization Using Taguchi-Grey Relational Analysis for Composition of Fly Ash-Ground Granulated Blast Furnace Slag Based Geopolymer Concrete. Construction and Building Materials 241, 118049.DOI
41 
Rahman, M. A., Sarker, P. K., Shaikh, F. U. A., and Saha, A. K. (2017) Soundness and Compressive Strength of Portland Cement Blended with Ground Granulated Ferronickel Slag. Construction and Building Materials 140, 194-202.DOI
42 
Reddy, M. S., Dinakar, P., and Rao, B. H. (2018) Mix Design Development of Fly Ash and Ground Granulated Blast Furnace Slag Based Geopolymer Concrete. Journal of Building Engineering 20, 712-722.DOI
43 
Sajan, P., Jiang, T., Lau, C., Tan, G., and Ng, K. (2021) Combined Effect of Curing Temperature, Curing Period and Alkaline Concentration on the Mechanical Properties of Fly Ash- based Geopolymer. Cleaner Materials 1, 100002.DOI
44 
Shilar, F. A., Ganachari, S. V., Patil, V. B., Javed, S, Khan, T. M. Y., and Baig, R. U. (2022) Assessment of Destructive and Nondestructive Analysis for GGBS Based Geopolymer Concrete and Its Statistical Analysis. Polymers 14(15), 3132.DOI
45 
Shubbar, A. A., Jafer, H., Abdulredha, M., Khafaji, Z. S. A., Nasr, M. S., Masoodi, Z. A., and Sadique, M. (2020) Properties of Cement Mortar Incorporated High Volume Fraction of GGBFSG and CKD from 1 Day to 550 Days. Journal of Building Engineering 30, 101327.DOI
46 
Shumuye, E. D., Zhao, J., and Wang, Z. (2021) Evolution of Mechanical Properties with Time of Fly-Ash-Based Geopolymer Mortars under the Effect of Granulated Ground Blast Furnace Slag Addition. Energies 13(5), 113.DOI
47 
Sitarz, M., Hager, I., and Choinska, M. (2020) Evolution of mechanical properties with time of fly-ash-based geopolymer mortars under the effect of granulated ground blast furnace slag addition. Energies 13(5).DOI
48 
Tersawy, S. H. A., Zakey, S. E., Sadany, R. A. E., and Sallam H. E. D. M. (2023) Utilization of Various Industrial Wastes in Ordinary Concrete Under Normal Manufacturing Conditions. International Journal of Concrete Structures and Materials 17(44).DOI
49 
Thaarrini, J., and Dhivya, S. (2016) Comparative Study on the Production Cost of Geopolymer and Conventional Concretes. International Journal of Civil Engineering Research 7(2), 117-124.URL
50 
Wallah, S. E. (2009) Drying Shrinkage of Heat-Cured Fly Ash- Based Geopolymer Concrete. Modern Applied Science Archives 3(12).URL
51 
You, N., Li, B., Cao, R., Shi, J., Chen, C., and Zhang, Y. (2019) The Influence of Steel Slag and Ferronickel Slag on the Properties of Alkali-activated Slag Mortar. Construction and Building Materials 227, 116614.DOI
52 
Yum, W. S., Jeon, D. H., Song, H. M., Sim, S. W., Kim, D. H., and Oh, J. E. (2020) Mechanical and Durability Properties of Cementless Concretes Made Using Three Types of CaO-Activated GGBFS Binders. Materials 15(1), 271.DOI