JKCI - Journal of the Korea Concrete Institute

1

Akindahunsi, A. A., and Uzoegbo, H. C. (2015) Strength and Durability Properties of Concrete with Starch Admixture. International Journal of Concrete Structures and Materials 9(3), 323-335.

2

Brien, J. V., and Mahboub, K. C. (2013) Influence of Polymer Type on Adhesion Performance of a Blended Cement Mortar. International Journal of Adhesion and Adhesives 43, 7-13.

3

Chen, N., Wang, P., Zhao, L., and Zhang, G. (2020) Water Retention Mechanism of HPMC in Cement Mortar. Materials 13(13), 2918.

4

Chen, Y., He, S., Gan, Y., Çopuroğlu, O., Veer, F., and Schlangen, E. (2022) A Review of Printing Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing. Journal of Building Engineering 45, 103599.

5

Hazarika, A., Hazarika, I., Gogoi, M., Bora, S. S., Borah, R. R., Goutam, P. J., and Saikia, N. (2018) Use of a Plant Based Polymeric Material as a Low Cost Chemical Admixture in Cement Mortar and Concrete Preparations. Journal of Building Engineering 15(1), 194-202.

6

Iqbal, M. A., Hamid, A., Imtiaz, H., Rizwan, M., Imran, M., Sheikh, U. A. A., and Saira, I. (2020) Cactus Pear: A Weed of Dry-Lands for Supplementing Food Security under Changing Climate. Planta Daninha 38, e020191761.

7

KATS (2017) Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency (KS L 5109). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA), 1-4. (In Korean)

8

KATS (2019) Standard Test Method for Polymer-modified Cement Mortar (KS F 2476). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)

9

Khayat, K. H. (1998) Viscosity-Enhancing Admixtures for Cement- Based Materials — An Overview. Cement and Concrete Composites 20(1), 171-188.

10

Kim, H. J., Kwon, K. S., Lee, K. Y., Lee, G. J., and Kim, Y. Y. (2020) Fresh and Strength Properties of Mortar Produced with Recycled Cactus Stem Powder. Journal of the Korean Recycled Construction Resources Institute 8(3), 365-371. (In Korean)

11

Kim, H. J., Lee, G. J., Kwon, K. S., and Kim, Y. Y. (2022) Preparing Method for Cement of Including Cactus Powder and Cement of Prepare by the Same. Patent No. 1024462580000. (In Korean)

12

Martinez-Molina, W., Torres-Acosta, A. A., Martínez-Peña, G. I., Guzmán, E. A., and Mendoza-Pérez, I. N. (2015) Cement- Based, Materials-Enhanced Durability from Opuntia Ficus Indica Mucilage Additions. ACI Materials Journal 112(1), 165.

13

Moelich, G. M., Kruger, J., and Combrinck, R. (2020) Plastic Shrinkage Cracking in 3D Printed Concrete. Composites Part B: Engineering 200, 108313.

14

Moelich, G. M., Kruger, P. J., and Combrinck, R. (2022) Mitigating Early Age Cracking in 3D Printed Concrete Using Fibres, Superabsorbent Polymers, Shrinkage Reducing Admixtures, B-CSA Cement and Curing Measures. Cement and Concrete Research 159, 106862.

15

Paritala, S., Singaram, K. K., Bathina, I., Khan, M. A., and Jyosyula, S. K. R. (2023) Rheology and Pumpability of Mix Suitable for Extrusion-Based Concrete 3D Printing–A Review. Construction and Building Materials 402, 132962.

16

Saxena, J., and Saxena, A. (2015) Enhancement the Strength of Conventional Concrete by Using Nylon Fibre. International Journal of Engineering Science 5(2), 56-59.

17

Schutter, G. D., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., and Agusti-Juan, I. (2018) Vision of 3D Printing with Concrete 1 - Technical, Economic and Environmental Potentials. Cement and Concrete Research 112, 25-36.

18

Seo, J. S. (2021) Printability and Material Performance of Cementitious Composite for 3D Printing Designed with Void Ratio Theory. Ph.D. Thesis. Chungnam National University. (In Korean)

19

Seo, J. S., and Kim, Y. Y. (2022) Experimental Evaluation of the Effect of the Mixing Design Factors of the Cementitious Composite for 3D Printer on the Printing Quality. Journal of the Korea Institute for Structural Maintenance and Inspection 26(1), 89-96. (In Korean)

20

Seo, J. S., Lee, B. C., and Kim, Y. Y. (2020) Uniformity and Accuracy of Mortar Layer Thickness for the Quality Evaluation of 3D Printer Output. Journal of the Korea Concrete Institute 32(4), 371-377. (In Korean)

21

Souza, M. T., Ferreira, I. M., Moraes, E. G. D., Senff, L., and Oliveira, A. P. N. (2020) 3D Printed Concrete for Large-Scale Buildings: An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects. Journal of Building Engineering 32, 101833.

22

Tay, Y. W. D., Qian, Y., and Tan, M. J. (2019) Printability Region for 3D Concrete Printing Using Slump and Slump Flow Test. Composites Part B: Engineering 174, 106968.

23

Torres-Acosta, A. A., and Díaz-Cruz, L. A. (2020) Concrete Durability Enhancement from Nopal (Opuntia Ficus-Indica) Additions. Construction and Building Materials 243, 118170.

24

Won, C. M. (2002) Restrained Shrinkage Properties of Polypropylene Fiber Reinforced Rapid-Setting Cement Concrete. Journal of the Korea Concrete Institute 14(1), 76-82. (In Korean)

25

Zhang, K., Pan, L., Li, J., and Lin, C. (2021) What is the Mechanism of the Fiber Effect on the Rheological Behavior of Cement Paste with Polycarboxylate Superplasticizer?. Construction and Building Materials 281, 122542.

26

Zhong, D., Liu, Q., and Zheng, D. (2022) Synthesis of Lignin- Grafted Polycarboxylate Superplasticizer and the Dispersion Performance in the Cement Paste. Colloids and Surfaces A: Physicochemical and Engineering Aspects 642, 128689.

27

Zhou, W., Zhang, Y., Ma, L., and Li, V. (2022) Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites (3DP-ECC). Cement and Concrete Composites 130, 104562.

JKCIJournal of
the Korea Concrete Institute

Journal of the Korea Concrete Institute

ISO Journal TitleJ Korea Concr Inst.

Journal Search

Journal XML

References

JKCIJournal ofthe Korea Concrete Institute