Joh, S.-H., Jang, D. W., Kang, T.-H., Lee, I.-H. (2005). "Evaluation of Stiffness
Structure for Geological Segmentsby CAP SASW Technique," Journal of Korean Geotechnical
Society, Korean Geotechnical Society, Vol. 21, No. 4, p.71-81 (in Korean).
Dziewonski, A., Bloch. S, and Landisman, M. (1969). "A technique for analysis of transient
seismic signals," Bull. Seism. Soc. Am. Vol. 59, No. 1, pp. 427-444.
Fuster, J. J. (2004). A hardware architecture for real-time beamforming, University
of Florida, Master's thesis, 126 pp.
Joh, S.-H. (1996). Advances in interpretation and analysis techniques for Spectral-Analysis-of-Surface-Waves
(SASW) method. Ph.D. dissertation, The University of Texas at Austin.
Joh, S.-H. (2012). "Refined Beamformer for Directional Surface- Wave Measurements
at Geotechnical Structures," Presented at 91th Annual Meeting of the Transportation
Research Board.
Johnson, D. H., and Dedgeon, D. E. (1993). Array signal processing, PTR Prentice-Hall,
Englewood Cliffs, N. J.
Kausel, E. and Roesset, J. M. (1981). "Stiffness matrices for layered soils," Bull.
Seismol. Soc. Am. Vol. 71, pp.1743-1761.
Kausel, E. and Peek, R. (1982). "Dynamic loads in the interior of a layered stratum:
An explicit solution," Bull. Seismol.. Soc. Am. Vol. 72, No. 6, pp.1459-1508.
Norfarah Nadia Ismail (2012). Refinement of Beamforming Technique for Practical and
Reliablie Stiffness Profiling. Master Thesis, Chung-Ang University. p.145.
Curtis technology, Principles of sonar beamforming, Retrieved at July 26, 2011 from
http://www.curtistech.co.uk/papers/beamform.pdf.
Stokoe, K. H., Joh, S.-H. , Woods, R. D. (2004). "Some contributions of in situ geophysical
measurements to solving geotechnical engineering problems," Proceedings of the second
international site characterization, Vol. 1, Porto, Portugal, pp. 19-42.
Stokoe, K. H., II, Wright, S. G., Bay, J. A., and Roesset, J. M. (1994). "Characterization
of geotechnical sites by SASW method," Geophysical Characteristics of Sites, ISSMFE,
Technical Committee 10 for XIII ICSMFE, International Science Publishers, New York,
pp. 15-25.
Zywicki, D. J. and Rix, G. J. (2005). "Mitigation of near-field effects for seismic
surface wave velocity estimation with cylindrical beamformers," Journal of geotechnical
and geoenvironmental engineering, Vol. 131, No. 8, pp. 970-977.
Zywicki, D. J. and Malladi, S. (2007). "Forward-backward cylindrical beamformer and
geometric spreading weighting for seismic surface wave parameter estimation," Proceedings
of Geo-Denver 2007, pp. 1-10.
Yoon, S. and Rix, G. J. (2009). "Near-Field Effects on Array-Based Surface Wave Methods
with Active Sources," Journal of Geotechnicaland Geoenvironmental Engineering, Vol.
135, No. 3, pp. 399-406.