Mobile QR Code QR CODE : Journal of the Korean Society of Civil Engineers
1 
Al-Amoudi, O. S. B., Maslehuddin, M. and Saadi, M. M. (1995). “Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.” ACI Mater. J., Vol. 92, No. 1, pp. 15-24.Al-Amoudi, O. S. B., Maslehuddin, M. and Saadi, M. M. (1995). “Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.” ACI Mater. J., Vol. 92, No. 1, pp. 15-24.Google Search
2 
Allahverdi, A. and Abadi, M. M. B. R. (2014). “Resistance of chemically activated high phosphorous slag content cement against frost-salt attack.” Cold Reg. Sci.. Tech., Vol. 98, pp. 18-25.10.1016/j.coldregions.2013.11.001Allahverdi, A. and Abadi, M. M. B. R. (2014). “Resistance of chemically activated high phosphorous slag content cement against frost-salt attack.” Cold Reg. Sci.. Tech., Vol. 98, pp. 18-25.DOI
3 
Aye, T. and Oguchi, C. T. (2011). “Resistance of plain and blended cement mortars exposed to severe sulfate attacks.” Constr. Build. Mater., Vol. 25, No. 6, pp. 2988-2996.10.1016/j.conbuildmat.2010.11.106Aye, T. and Oguchi, C. T. (2011). “Resistance of plain and blended cement mortars exposed to severe sulfate attacks.” Constr. Build. Mater., Vol. 25, No. 6, pp. 2988-2996.DOI
4 
Babu, K. and Kumar, V. S. R. (2000). “Efficiency of GGBS in concrete.” Cem. Concr. Res., Vol. 30, No. 7, pp. 1031-1036.10.1016/S0008-8846(00)00271-4Babu, K. and Kumar, V. S. R. (2000). “Efficiency of GGBS in concrete.” Cem. Concr. Res., Vol. 30, No. 7, pp. 1031-1036.DOI
5 
Beushausen, H., Alexander, M. and Ballim, Y. (2012). “Early-age properties, strength development and heat of hydration of concrete containing various South African slags at different replacement ratios.” Constr. Build. Mater., Vol. 29, pp. 533-540.10.1016/j.conbuildmat.2011.06.018Beushausen, H., Alexander, M. and Ballim, Y. (2012). “Early-age properties, strength development and heat of hydration of concrete containing various South African slags at different replacement ratios.” Constr. Build. Mater., Vol. 29, pp. 533-540.DOI
6 
Cohen, M. and Bentur, A. (1988). “Durability of portland cement- silica fume pastes in magnesium sulfate and sodium sulfate solution.” ACI Mater. J., Vol. 85, No. 3, pp. 148-157.Cohen, M. and Bentur, A. (1988). “Durability of portland cement- silica fume pastes in magnesium sulfate and sodium sulfate solution.” ACI Mater. J., Vol. 85, No. 3, pp. 148-157.Google Search
7 
Deja, J. (2003). “Freezing and de-icing salt resistance of blast furnace slag concretes.” Cem. Concr. Compos., Vol. 25, No. 3, pp. 357-361.10.1016/S0958-9465(02)00052-5Deja, J. (2003). “Freezing and de-icing salt resistance of blast furnace slag concretes.” Cem. Concr. Compos., Vol. 25, No. 3, pp. 357-361.DOI
8 
Geng, H. and Li, Q. (2014). “Development of microstructure and chemical composition of hydration products of slag activated by ordinary Portland cement.” Mater. Charact., Vol. 87, pp. 149-158.10.1016/j.matchar.2013.11.012Geng, H. and Li, Q. (2014). “Development of microstructure and chemical composition of hydration products of slag activated by ordinary Portland cement.” Mater. Charact., Vol. 87, pp. 149-158.DOI
9 
Hadj-sadok, A., Kenai, S., Courard, L. and Darimont, A. (2011). “Microstructure and durability of mortars modified with medium active blast furnace slag.” Constr. Build. Mater., Vol. 25, No. 2, pp. 1018-1025.10.1016/j.conbuildmat.2010.06.077Hadj-sadok, A., Kenai, S., Courard, L. and Darimont, A. (2011). “Microstructure and durability of mortars modified with medium active blast furnace slag.” Constr. Build. Mater., Vol. 25, No. 2, pp. 1018-1025.DOI
10 
Higgins, D. D. (1995). “Ground granulated blast furnace slag.” World Cem., Vol. 6, pp. 51-52.Higgins, D. D. (1995). “Ground granulated blast furnace slag.” World Cem., Vol. 6, pp. 51-52.Google Search
11 
Hooton, R. D. (2000). “Canadian use of ground granulated blast- furnace slag as a supplementary cementing material for enhanced performance of concrete.” Can. J. of Civ. Eng., Vol. 27, No. 4, pp. 754-760.10.1139/l00-014Hooton, R. D. (2000). “Canadian use of ground granulated blast- furnace slag as a supplementary cementing material for enhanced performance of concrete.” Can. J. of Civ. Eng., Vol. 27, No. 4, pp. 754-760.DOI
12 
Kim, G. W., Kim, B. J., Yang, K. H. and Song, J. K. (2012). “Strength development of blended sodium alkali-activated ground granulated blast-furnace slag (GGBS) mortar.” J. of Kor. Concr. Instit., Vol. 24, No. 2, pp. 137-145 (in Korean).10.4334/JKCI.2012.24.2.137Kim, G. W., Kim, B. J., Yang, K. H. and Song, J. K. (2012). “Strength development of blended sodium alkali-activated ground granulated blast-furnace slag (GGBS) mortar.” J. of Kor. Concr. Instit., Vol. 24, No. 2, pp. 137-145 (in Korean).DOI
13 
Lawrence, C. D. (1992). “The influence of binder type on sulfate resistance.” Cem. Concr. Res., Vol. 22, No. 6, pp. 1047-1058.10.1016/0008-8846(92)90035-TLawrence, C. D. (1992). “The influence of binder type on sulfate resistance.” Cem. Concr. Res., Vol. 22, No. 6, pp. 1047-1058.DOI
14 
Lee, S. H., Kim, W. K. and Kang, S. H. (2012). “Hydration mec-hanism of ground granulated blast furnace slag.” J. of Kor. Concr. Instit., Vol. 24, No. 6, pp. 31-34 (in Korean). Lee, S. H., Kim, W. K. and Kang, S. H. (2012). “Hydration mec-hanism of ground granulated blast furnace slag.” J. of Kor. Concr. Instit., Vol. 24, No. 6, pp. 31-34 (in Korean).Google Search
15 
Lee, S. S., Won, C., Kim, D. S. and Park, S. J. (2000). “A study on the engineering properties of concrete using blast-furnace slag powder.” J. of Kor. Concr. Instit., Vol. 12, No. 4, pp. 49-58 (in Korean).Lee, S. S., Won, C., Kim, D. S. and Park, S. J. (2000). “A study on the engineering properties of concrete using blast-furnace slag powder.” J. of Kor. Concr. Instit., Vol. 12, No. 4, pp. 49-58 (in Korean).Google Search
16 
Lubeck, A., Gastaldini, A. L. G., Barin, D. S. and Siqueira, H. C. (2012). “Compressive strength and electrical properties of concrete with white Portland cement and blast-furnace slag.” Cem. Concr. Compos., Vol. 34, No. 3, pp. 392-399.10.1016/j.cemconcomp.2011.11.017Lubeck, A., Gastaldini, A. L. G., Barin, D. S. and Siqueira, H. C. (2012). “Compressive strength and electrical properties of concrete with white Portland cement and blast-furnace slag.” Cem. Concr. Compos., Vol. 34, No. 3, pp. 392-399.DOI
17 
Moon, H. Y. and Lee, S. T. (2003). “Influence of silicate ratio and additives on the sulphate resistance of portland cement.” Adv. Cem. Res., Vol. 15, No. 3, pp. 91-101.10.1680/adcr.2003.15.3.91Moon, H. Y. and Lee, S. T. (2003). “Influence of silicate ratio and additives on the sulphate resistance of portland cement.” Adv. Cem. Res., Vol. 15, No. 3, pp. 91-101.DOI
18 
Neto, A. A. M., Cincotto, M. A. and Repette, W. (2010). “Mechanical properties, drying and autogenous shrinkage of blast furnace slag activated with hydrated lime and gypsum.” Cem. Concr. Compos., Vol. 32, No. 4, pp. 312-318. 10.1016/j.cemconcomp.2010.01.004Neto, A. A. M., Cincotto, M. A. and Repette, W. (2010). “Mechanical properties, drying and autogenous shrinkage of blast furnace slag activated with hydrated lime and gypsum.” Cem. Concr. Compos., Vol. 32, No. 4, pp. 312-318.DOI
19 
Oner, A. and Akyuz, S. (2007). “An experimental study on optimum usage of GGBS for the compressive strength of concrete.” Cem. Concr. Compos., Vol. 29, No. 6, pp. 505-514. 10.1016/j.cemconcomp.2007.01.001Oner, A. and Akyuz, S. (2007). “An experimental study on optimum usage of GGBS for the compressive strength of concrete.” Cem. Concr. Compos., Vol. 29, No. 6, pp. 505-514.DOI
20 
Oner, M., Erdogdu, K. and Gunlu, A. (2003). “Effect of components fineness on strength of blast furnace slag cement.” Cem. Concr. Res., Vol. 33, No. 4, pp. 463-469.10.1016/S0008-8846(02)00713-5Oner, M., Erdogdu, K. and Gunlu, A. (2003). “Effect of components fineness on strength of blast furnace slag cement.” Cem. Concr. Res., Vol. 33, No. 4, pp. 463-469.DOI
21 
Ortega, J. M., Sanchez, I. and Climent, M. A. (2012). “Durability related transport properties of OPC and slag cement mortars hardened under different environmental conditions.” Constr. Build. Mater., Vol. 27, No. 1, pp. 176-183.10.1016/j.conbuildmat.2011.07.064Ortega, J. M., Sanchez, I. and Climent, M. A. (2012). “Durability related transport properties of OPC and slag cement mortars hardened under different environmental conditions.” Constr. Build. Mater., Vol. 27, No. 1, pp. 176-183.DOI
22 
Osborne, G. J. (1999). “Durability of Portland blast-furnace slag cement concrete.” Cem. Concr. Compos., Vol. 21, No. 1, pp. 11-21.10.1016/S0958-9465(98)00032-8Osborne, G. J. (1999). “Durability of Portland blast-furnace slag cement concrete.” Cem. Concr. Compos., Vol. 21, No. 1, pp. 11-21.DOI
23 
Ramlochan, T., Thomas, M. D. A. and Hooton, R. D. (2004). “The effect of pozzolans and slag on the expansion of mortars cured at elevated temperature: Part II: Microstructural and Microchemical Investigations.” Cem. Concr. Res., Vol. 34, No. 8, pp. 1341-1356.10.1016/j.cemconres.2003.12.026Ramlochan, T., Thomas, M. D. A. and Hooton, R. D. (2004). “The effect of pozzolans and slag on the expansion of mortars cured at elevated temperature: Part II: Microstructural and Microchemical Investigations.” Cem. Concr. Res., Vol. 34, No. 8, pp. 1341-1356.DOI
24 
Rasheeduzzafar, Dakhil, F. H., Al-Gahtani, A. S., Al-Saadoun, S. S. and Mather, A. B. (1990). “Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.” ACI Mater. J., Vol. 80, No. 2, pp. 114-122.Rasheeduzzafar, Dakhil, F. H., Al-Gahtani, A. S., Al-Saadoun, S. S. and Mather, A. B. (1990). “Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.” ACI Mater. J., Vol. 80, No. 2, pp. 114-122.Google Search
25 
Sabir, B. B. (1997). “Mechanical properties and frost resistance of silica fume concrete.” Cem. Concr. Compos., Vol. 19, No. 4, pp. 285-294.10.1016/S0958-9465(97)00020-6Sabir, B. B. (1997). “Mechanical properties and frost resistance of silica fume concrete.” Cem. Concr. Compos., Vol. 19, No. 4, pp. 285-294.DOI
26 
Sisomphon, K., Copuroglu, O. and Fraaij, A. L. A. (2010). “Deve-lopment of blast furnace slag mixtures against frost salt attack.” Cem. and Concr. Compos., Vol. 32, No. 8, pp. 630-638.10.1016/j.cemconcomp.2010.06.001Sisomphon, K., Copuroglu, O. and Fraaij, A. L. A. (2010). “Deve-lopment of blast furnace slag mixtures against frost salt attack.” Cem. and Concr. Compos., Vol. 32, No. 8, pp. 630-638.DOI
27 
Teng, S., Yang, T., Lim, D. and Divsholi, B. S. (2013). “Durability and mechanical properties of high strength concrete incorporating ultra fine ground granulated blast-furnace slag.” Constr. Build. Mater., Vol. 40, pp. 875-881.10.1016/j.conbuildmat.2012.11.052Teng, S., Yang, T., Lim, D. and Divsholi, B. S. (2013). “Durability and mechanical properties of high strength concrete incorporating ultra fine ground granulated blast-furnace slag.” Constr. Build. Mater., Vol. 40, pp. 875-881.DOI
28 
Wang, Z., Zeng, Q., Wang, L., Yao, Y. and Li, K. (2014). “Corrosion of rebar in concrete under cyclic freeze-thaw and Chloride salt action.” Constr. Build. Mater., Vol. 53, pp. 40-47.10.1016/j.conbuildmat.2013.11.063Wang, Z., Zeng, Q., Wang, L., Yao, Y. and Li, K. (2014). “Corrosion of rebar in concrete under cyclic freeze-thaw and Chloride salt action.” Constr. Build. Mater., Vol. 53, pp. 40-47.DOI