ASTM D5298 (2010). Standard test method for measurement of soil suction using filter paper, Washington, D. C.ASTM D5298 (2010). Standard test method for measurement of soil suction using filter paper, Washington, D. C.

Bicalho, K. V., Marinho, F. A. M., Fleureau, J. M., Gomes C. A. and Ferreira, S. (2009). “Evaluation of filter paper calibrations for indirect determination of soil suctions of an unsaturated compacted silty sand.” Proc. of the 17th Int. Conf. on Soil Mechanics and Geotechnical Eng., Egypt, 2009.Bicalho, K. V., Marinho, F. A. M., Fleureau, J. M., Gomes C. A. and Ferreira, S. (2009). “Evaluation of filter paper calibrations for indirect determination of soil suctions of an unsaturated compacted silty sand.” Proc. of the 17th Int. Conf. on Soil Mechanics and Geotechnical Eng., Egypt, 2009.

Brooks, R. H. and Corey, A. T. (1964). “Hydraulic properties of porous media.” Hydrology Paper no.3, Colorado State Univ., Fort Collins, Colo, 1964.Brooks, R. H. and Corey, A. T. (1964). “Hydraulic properties of porous media.” Hydrology Paper no.3, Colorado State Univ., Fort Collins, Colo, 1964.

Bulut, R., Lytton, R. L. and Wray, W. K. (2001) “Suction mea-surements by filter paper.” ASCE Geotechnical Special Publication, No. 115, pp. 243-261.Bulut, R., Lytton, R. L. and Wray, W. K. (2001) “Suction mea-surements by filter paper.” ASCE Geotechnical Special Publication, No. 115, pp. 243-261.

Chandra, D., Chua, K. M. and Lytton, R. L. (1989). “Effects of temperature and moisture on load response of granular base material in thin pavements.” Transportation Research Record No. 1252, National Research Council, Washington, D. C., pp. 33-41.Chandra, D., Chua, K. M. and Lytton, R. L. (1989). “Effects of temperature and moisture on load response of granular base material in thin pavements.” Transportation Research Record No. 1252, National Research Council, Washington, D. C., pp. 33-41.

Childs, E. C. and Collis-George, N. (1950). “The permeability of porous materials.” Proc. Royal Soc., Vol. 210, No. A, pp. 392-405. 10.1098/rspa.1950.0068Childs, E. C. and Collis-George, N. (1950). “The permeability of porous materials.” Proc. Royal Soc., Vol. 210, No. A, pp. 392-405.

Drumm, E., Reeves, J., Madgett, M. and Trolinger, W. (1997). “Subgrade resilient modulus correction for saturation effects.” J. Geotech. Geoenviron. Eng., Vol. 123, No. 7, pp. 663-670.10.1061/(ASCE)1090-0241(1997)123:7(663)Drumm, E., Reeves, J., Madgett, M. and Trolinger, W. (1997). “Subgrade resilient modulus correction for saturation effects.” J. Geotech. Geoenviron. Eng., Vol. 123, No. 7, pp. 663-670.

Fredlund, D. G. and Xing, A. (1994). “Equations for the soil-water characteristic curve.” Canadian Geotechnical Journal, Vol. 31, No. 4, pp. 521-532.10.1139/t94-061Fredlund, D. G. and Xing, A. (1994). “Equations for the soil-water characteristic curve.” Canadian Geotechnical Journal, Vol. 31, No. 4, pp. 521-532.

Gardner, W. R. (1958). “Some steady state solutions of the unsaturated moisture flow equation with application of evaporation from a water table.” Soil Science, Vol. 85, pp. 223-232.10.1097/00010694-195804000-00006Gardner, W. R. (1958). “Some steady state solutions of the unsaturated moisture flow equation with application of evaporation from a water table.” Soil Science, Vol. 85, pp. 223-232.

Korea Rail Network Authority (2011). Railroad construction specification, 11-B551219-000019-01Korea Rail Network Authority (2011). Railroad construction specification, 11-B551219-000019-01

Kunze, R. J., Uehara, G. and Graham, K. (1968). “Factors important in the calculation of hydraulic conductivity.” Proc. Soil Sci., Vol. 32, pp. 760-765.10.2136/sssaj1968.03615995003200060020xKunze, R. J., Uehara, G. and Graham, K. (1968). “Factors important in the calculation of hydraulic conductivity.” Proc. Soil Sci., Vol. 32, pp. 760-765.

Lee, S., Lee, S. and Jang, B. (2002). “Unsaturated shear strength characteristics of weathered granite soils.” J. of the Korean Society of Civil Eng., Vol. 22, No. 1, pp. 81-88.Lee, S., Lee, S. and Jang, B. (2002). “Unsaturated shear strength characteristics of weathered granite soils.” J. of the Korean Society of Civil Eng., Vol. 22, No. 1, pp. 81-88.

Marshall, T. J. (1958). “A relation between permeability and size distribution of pores.” J. Soil Sci., Vol. 9, pp. 1-8.10.1111/j.1365-2389.1958.tb01892.xMarshall, T. J. (1958). “A relation between permeability and size distribution of pores.” J. Soil Sci., Vol. 9, pp. 1-8.

McKee, C. R. and Bumb, A. C. (1987). “Flow-testing coalbed methane production wells in the presence of water and gas.” In SPIE Formation Evaluation, December, pp. 599-608.10.2118/14447-PAMcKee, C. R. and Bumb, A. C. (1987). “Flow-testing coalbed methane production wells in the presence of water and gas.” In SPIE Formation Evaluation, December, pp. 599-608.

Ministry of Land, Transport, and Maritime Affairs. (2011). 2011 Pavement structural design specification.Ministry of Land, Transport, and Maritime Affairs. (2011). 2011 Pavement structural design specification.

Oh, J., Fernando, E. G. and Lee, W. (2010). “Consideration of moistrue effect on load bearing capacity in texas flexible pave-ments.” KSCE J. of Civil Eng., Vol. 14, No. 4, pp. 493-501.10.1007/s12205-010-0493-xOh, J., Fernando, E. G. and Lee, W. (2010). “Consideration of moistrue effect on load bearing capacity in texas flexible pave-ments.” KSCE J. of Civil Eng., Vol. 14, No. 4, pp. 493-501.

Oh, J., Fernando, E. G., Holzschuher, C. and Horhota, D. (2012). “Comparison of resilient modulus values for florida flexible mechanistic-empirical pavement design.” Int. J. of Pavement Eng., Vol. 13, No. 5, pp. 472-484.10.1080/10298436.2011.633170Oh, J., Fernando, E. G., Holzschuher, C. and Horhota, D. (2012). “Comparison of resilient modulus values for florida flexible mechanistic-empirical pavement design.” Int. J. of Pavement Eng., Vol. 13, No. 5, pp. 472-484.

Ping, W. V., Wang, Y. and Yang, Z. (2000). Field and laboratory evaluation of resilient modulus measurements of florida pavements soils, Research Report No. FL/DOT/RMC/0636(F)-4538, FAMU-FSU College of Engineering, Tallahassee, Fl.Ping, W. V., Wang, Y. and Yang, Z. (2000). Field and laboratory evaluation of resilient modulus measurements of florida pavements soils, Research Report No. FL/DOT/RMC/0636(F)-4538, FAMU-FSU College of Engineering, Tallahassee, Fl.

Van Genuchten, M. T. (1980). “A closed form equation predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Amer. Journal, Vol. 44, pp. 892-898.10.2136/sssaj1980.03615995004400050002xVan Genuchten, M. T. (1980). “A closed form equation predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Amer. Journal, Vol. 44, pp. 892-898.

Vanapalli, S. K., Fredlund, D. G., Pufahl, D. E. and Clifton, A. W. (1996). “Model of the prediction of shear strength with respect to soil suction.” Canadian Geotechnical Journal, Vol. 33, No. 3, pp. 379-392.10.1139/t96-060Vanapalli, S. K., Fredlund, D. G., Pufahl, D. E. and Clifton, A. W. (1996). “Model of the prediction of shear strength with respect to soil suction.” Canadian Geotechnical Journal, Vol. 33, No. 3, pp. 379-392.

Zapata, C., E. and Houston, W. N. (2008). Calibration and validation of the enhanced integrated climatic model for pavement design, NCHRP Report 602, Transportation Research Board, Washington, D.C.Zapata, C., E. and Houston, W. N. (2008). Calibration and validation of the enhanced integrated climatic model for pavement design, NCHRP Report 602, Transportation Research Board, Washington, D.C.