Mobile QR Code QR CODE : Journal of the Korean Society of Civil Engineers
1 
Aas, G., Lacasse, S., Lunne, T. and Hoeg, K. (1986). “Use of in situ tests for foundation design on clay.” Proceedings of In situ '86, Use of In Situ Tests in Geotechnical Engineering, ASCE GSP 6, Blacksburg, Virginia, pp. 1-30.Aas, G., Lacasse, S., Lunne, T. and Hoeg, K. (1986). “Use of in situ tests for foundation design on clay.” Proceedings of In situ '86, Use of In Situ Tests in Geotechnical Engineering, ASCE GSP 6, Blacksburg, Virginia, pp. 1-30.Google Search
2 
Ajmera, B., Tiwari, B. and Shrestha, D. (2012). “Effect of mineral composition and shearing rates on the undrained shear strength of expansive clays.” GeoCongress 2012, ASCE.10.1061/9780784412121.122Ajmera, B., Tiwari, B. and Shrestha, D. (2012). “Effect of mineral composition and shearing rates on the undrained shear strength of expansive clays.” GeoCongress 2012, ASCE.DOI
3 
Amar, S., Baguelin, F., Jezequel, J. F. and Le Mehaute, A. (1975). “In situ shear resistance of clays.” Proc. ASCE Spec. Conf. In Situ Measurement of Soil Properties, Raleigh, Vol. 1, pp. 22-45.Amar, S., Baguelin, F., Jezequel, J. F. and Le Mehaute, A. (1975). “In situ shear resistance of clays.” Proc. ASCE Spec. Conf. In Situ Measurement of Soil Properties, Raleigh, Vol. 1, pp. 22-45.Google Search
4 
Baligh, M. M., Vivatrat, V. and Ladd, C. C. (1980). “Cone penetration in soil profiling.” Journal of the Geotechnical Engineering Division, Vol. 106, No. 4, pp. 447-461.Baligh, M. M., Vivatrat, V. and Ladd, C. C. (1980). “Cone penetration in soil profiling.” Journal of the Geotechnical Engineering Division, Vol. 106, No. 4, pp. 447-461.Google Search
5 
Bolton, M. D., Gui, M. W., Garnier, J., Corte, J. F., Bagge, G., Laue, J. and Renzi, R. (1999). “Centrifuge cone penetration tests in sand.” Géotechnique, Vol. 49, No. 4, pp. 543-552.10.1680/geot.1999.49.4.543Bolton, M. D., Gui, M. W., Garnier, J., Corte, J. F., Bagge, G., Laue, J. and Renzi, R. (1999). “Centrifuge cone penetration tests in sand.” Géotechnique, Vol. 49, No. 4, pp. 543-552.DOI
6 
Chung, S. F., Randolph, M. and Schneider, J. (2006). “Effect of penetration rate on penetrometer resistance in clay.” Journal of Geotechnical and Geoenvironmetal Engineering, ASCE, Vol. 132, No. 9, pp. 1188-1196.10.1061/(ASCE)1090-0241(2006)132:9(1188)Chung, S. F., Randolph, M. and Schneider, J. (2006). “Effect of penetration rate on penetrometer resistance in clay.” Journal of Geotechnical and Geoenvironmetal Engineering, ASCE, Vol. 132, No. 9, pp. 1188-1196.DOI
7 
de Lima, D. C. and Tumay, M. T. (1991). “Scale effects in cone penetration tests.” Geotechnical Engineering Congress, ASCE, GSP2 (7) Boulder, CO, pp. 38-51.de Lima, D. C. and Tumay, M. T. (1991). “Scale effects in cone penetration tests.” Geotechnical Engineering Congress, ASCE, GSP2 (7) Boulder, CO, pp. 38-51.Google Search
8 
DeJong, J., Yafrate, N. and DeGroot, D. (2011). “Evaluation of undrained shear strength using full-flow penetrometers.” Journal of Geotechnical and Geoenvironmetal Engineering, ASCE, Vol. 137, No. 1, pp. 14-26.10.1061/(ASCE)GT.1943-5606.0000393DeJong, J., Yafrate, N. and DeGroot, D. (2011). “Evaluation of undrained shear strength using full-flow penetrometers.” Journal of Geotechnical and Geoenvironmetal Engineering, ASCE, Vol. 137, No. 1, pp. 14-26.DOI
9 
Gui, M. W. (1998). “Guidelines for cone penetration tests in sand.” Proc. Int. Conf. on Centrifuge Modelling (Centrifuge '98), A.A. Balkema, Rotterdam, Netherlands, Vol. 1, pp. 155-160.Gui, M. W. (1998). “Guidelines for cone penetration tests in sand.” Proc. Int. Conf. on Centrifuge Modelling (Centrifuge '98), A.A. Balkema, Rotterdam, Netherlands, Vol. 1, pp. 155-160.Google Search
10 
Jamiolkowski, M., Lancellotta, R., Tordella, L. and Battaglio, M. (1982). “Undrained Strength from CPT.” Proc. of 2nd European Symposium on Penetration Testing, Amsterdam, pp. 599-606.Jamiolkowski, M., Lancellotta, R., Tordella, L. and Battaglio, M. (1982). “Undrained Strength from CPT.” Proc. of 2nd European Symposium on Penetration Testing, Amsterdam, pp. 599-606.Google Search
11 
Kim, J. H., Choo, Y. W., Kim, D. J. and Kim, D. S. (2015). “Miniature cone tip resistance on sand in a centrifuge.” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 142, No. 3, pp. 1-14.Kim, J. H., Choo, Y. W., Kim, D. J. and Kim, D. S. (2015). “Miniature cone tip resistance on sand in a centrifuge.” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 142, No. 3, pp. 1-14.Google Search
12 
Kim, K. K., Prezzi, M., Salgado, R. and Lee, W. J. (2008). “Effect of penetration rate on cone penetration resistance in saturated clayey soils.” Journal of Geotechnical and Geoenvironmetal Engineering, ASCE, Vol. 134, No. 8, pp. 1142-1153.10.1061/(ASCE)1090-0241(2008)134:8(1142)Kim, K. K., Prezzi, M., Salgado, R. and Lee, W. J. (2008). “Effect of penetration rate on cone penetration resistance in saturated clayey soils.” Journal of Geotechnical and Geoenvironmetal Engineering, ASCE, Vol. 134, No. 8, pp. 1142-1153.DOI
13 
Kjekstad, O., Lunne, T. and Clausen, C. J. F. (1978). “Comparison between insitu cone resistance and laboratory strength for over-consolidated north sea clays.” Marine Geotechnology, Vol. 3, No. 1, pp. 23-36.10.1080/10641197809379792Kjekstad, O., Lunne, T. and Clausen, C. J. F. (1978). “Comparison between insitu cone resistance and laboratory strength for over-consolidated north sea clays.” Marine Geotechnology, Vol. 3, No. 1, pp. 23-36.DOI
14 
Lunne, T. and Kleven, A. (1981). “Role of CPT in north sea foundation engineering.” Symposium on Cone Penetration Testing and Experience, Geotechnical Division, ASCE, October, pp. 49-75.Lunne, T. and Kleven, A. (1981). “Role of CPT in north sea foundation engineering.” Symposium on Cone Penetration Testing and Experience, Geotechnical Division, ASCE, October, pp. 49-75.Google Search
15 
Lunne, T., Andersen, K. H., Low, H. E., Randolph, M. F. and Sjursen, M. (2011). “Guidelines for offshore in situ testing and interpretation in deepwater soft clays.” Canadian Geotechnical Journal, Vol. 48, No. 4, pp. 543-556.10.1139/t10-088Lunne, T., Andersen, K. H., Low, H. E., Randolph, M. F. and Sjursen, M. (2011). “Guidelines for offshore in situ testing and interpretation in deepwater soft clays.” Canadian Geotechnical Journal, Vol. 48, No. 4, pp. 543-556.DOI
16 
Lunne, T., Eidsmoen, T., Gillespie, D. and Howland, J. D. (1986). “Laboratory and field evaluation of cone penetrometer.” Proceedings of In situ '86, Use of In Situ Tests in Geotechnical Engineering, ASCE GSP 6, Blacksburg, Virginia, pp. 714-729.Lunne, T., Eidsmoen, T., Gillespie, D. and Howland, J. D. (1986). “Laboratory and field evaluation of cone penetrometer.” Proceedings of In situ '86, Use of In Situ Tests in Geotechnical Engineering, ASCE GSP 6, Blacksburg, Virginia, pp. 714-729.Google Search
17 
Lunne, T., Randolph, M. F., Chung, S. F., Andersen, K. H. and Sjursen, M. (2005). “Comparison of cone and T-bar factors in two onshore and one offshore clay sediments.” Proc., Int. Symp. on Frontiers in Offshore Geotechnics (ISFOG), Perth, Australia, in press.10.1201/NOE0415390637.ch118Lunne, T., Randolph, M. F., Chung, S. F., Andersen, K. H. and Sjursen, M. (2005). “Comparison of cone and T-bar factors in two onshore and one offshore clay sediments.” Proc., Int. Symp. on Frontiers in Offshore Geotechnics (ISFOG), Perth, Australia, in press.DOI
18 
Nanda, S., Sivakumar, V., Hoyer, P., Bradshaw, A., Gavin, K. G., Gerkus, H., Jalivand, S., Gilbert, R. B., Doherty, P. and Fanning, J. (2017). “Effects of strain rates on the undrained shear strength of kaolin.” Geotechnical Testing Journal, Vol. 40, No. 6, pp. 951-962.10.1520/GTJ20160101Nanda, S., Sivakumar, V., Hoyer, P., Bradshaw, A., Gavin, K. G., Gerkus, H., Jalivand, S., Gilbert, R. B., Doherty, P. and Fanning, J. (2017). “Effects of strain rates on the undrained shear strength of kaolin.” Geotechnical Testing Journal, Vol. 40, No. 6, pp. 951-962.DOI
19 
Randolph, M. F. and Andersen, K. H. (2006). “Numerical analysis of T-bar penetration in soft clay.” International Journal of Geomechanics, Vol. 6, No. 6, pp. 411-420.10.1061/(ASCE)1532-3641(2006)6:6(411)Randolph, M. F. and Andersen, K. H. (2006). “Numerical analysis of T-bar penetration in soft clay.” International Journal of Geomechanics, Vol. 6, No. 6, pp. 411-420.DOI
20 
Rémai, Z. (2013). “Correlation of undrained shear strength and CPT resistance.” Periodica Polytechnica, Civil Engineering, Vol. 57, No. 1, pp. 39-44.10.3311/PPci.2140Rémai, Z. (2013). “Correlation of undrained shear strength and CPT resistance.” Periodica Polytechnica, Civil Engineering, Vol. 57, No. 1, pp. 39-44.DOI
21 
Robertson, P. K. (1989). “Soil classification using the cone penetration test” Canadian Geotechnical Journal, Vol. 27, pp. 151-158.10.1139/t90-014Robertson, P. K. (1989). “Soil classification using the cone penetration test” Canadian Geotechnical Journal, Vol. 27, pp. 151-158.DOI
22 
Sheng, D., Cui, L. and Ansari, Y. (2012). “Interpretation of cone factor in undrained soils via full-penetration finite-element analysis.” International Journal of Geomechanics, Vol. 13, No. 6, pp. 745-753.10.1061/(ASCE)GM.1943-5622.0000279Sheng, D., Cui, L. and Ansari, Y. (2012). “Interpretation of cone factor in undrained soils via full-penetration finite-element analysis.” International Journal of Geomechanics, Vol. 13, No. 6, pp. 745-753.DOI
23 
Stark, T. D. and Juhrend, J. E. (1989). “Undrained shear strength from cone penetration tests.” Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, Vol. 1, pp. 327-330.Stark, T. D. and Juhrend, J. E. (1989). “Undrained shear strength from cone penetration tests.” Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, Vol. 1, pp. 327-330.Google Search
24 
Stewart, D. A. and Randolph, M. F. (1994). “T-bar penetration testing in soft clay.” Journal of Geotechnical Engineering, Vol. 120, No. 12, pp. 2230-2235.10.1061/(ASCE)0733-9410(1994)120:12(2230)Stewart, D. A. and Randolph, M. F. (1994). “T-bar penetration testing in soft clay.” Journal of Geotechnical Engineering, Vol. 120, No. 12, pp. 2230-2235.DOI
25 
Sweeney, B. (1987). Liquefaction evaluation using a miniature cone penetrometer and a large-scale calibration chamber, Ph.D. dissertation, Stanford University, CA.Sweeney, B. (1987). Liquefaction evaluation using a miniature cone penetrometer and a large-scale calibration chamber, Ph.D. dissertation, Stanford University, CA.Google Search
26 
Titi, H., Mohammad, L. and Tumay, M. (2000). “Miniature cone penetration tests in soft and stiff clays.” Geotechnical Testing Journal, Vol. 23, No. 4, pp. 432-334.10.1520/GTJ11064JTiti, H., Mohammad, L. and Tumay, M. (2000). “Miniature cone penetration tests in soft and stiff clays.” Geotechnical Testing Journal, Vol. 23, No. 4, pp. 432-334.DOI
27 
Tumay, M. T., Kurup, P. U. and Boggess, R. L. (1998). “A continuous intrusion electronic miniature cone penetration test system for site characterization.” Proceedings of the First International Conference on Site Characterization-ISC’98, Atlanta, Robertson & Mayne, Eds., Balkema, No. 2, pp. 1183-1188.Tumay, M. T., Kurup, P. U. and Boggess, R. L. (1998). “A continuous intrusion electronic miniature cone penetration test system for site characterization.” Proceedings of the First International Conference on Site Characterization-ISC’98, Atlanta, Robertson & Mayne, Eds., Balkema, No. 2, pp. 1183-1188.Google Search
28 
Wei, L., Pant, R. and Tumay, M. (2010). “A case study of undrained shear strength evaluation from in-situ tests in soft Louisiana soils.” GeoShanghai International Conference, Geotechnical Special Publication, 200, Soil Behavior and Geo-Micromechanics.10.1061/41101(374)6Wei, L., Pant, R. and Tumay, M. (2010). “A case study of undrained shear strength evaluation from in-situ tests in soft Louisiana soils.” GeoShanghai International Conference, Geotechnical Special Publication, 200, Soil Behavior and Geo-Micromechanics.DOI