Mobile QR Code QR CODE : Journal of the Korean Society of Civil Engineers
1 
Bond, A. J., Schuppener, B., Scarpelli, G., Orr, T. L., Dimova, S., Nikolova, B. and Pinto, A. V. (2013). Eurocode 7: Geotechnical Design Worked examples. In Workshop "Eurocode" (Vol. 7), Available at: https://eurocodes.jrc.ec.europa.eu/doc/2013_06_WS_ GEO/report/2013_06_WS_GEO.pdf (Accessed: Jan. 8, 2019).
2 
Boonyong, S., Park, K. C. and Kim, I. C. (2015). "Analytical parametric study on pullout capacity of embedded suction anchors." Journal of Korean Society of Coastal and Ocean Engineers, Vol. 27, No. 3, pp. 182-189.DOI
3 
Cerfontaine, B., Collin, F. and Charlier, R. (2015). "Numerical modelling of transient cyclic vertical loading of suction caissons in sand." Geotechnique, Vol. 66, No. 2, pp. 121-136.DOI
4 
Choo, Y. W., Olalo, L. and Bae, K. (2016). "Effect of skirt length on behavior of suction foundations for offshore wind turbines installed in dense sand subjected to earthquake loadings." Journal of Korean Society of Coastal and Ocean Engineers, Vol. 28, No. 4, pp. 202-211 (in Korean).DOI
5 
Cotter, O. (2010). Installation of suction caisson foundations for offshore renewable energy structures, Ph.D. dissertation, Oxford University, UK.
6 
Det Norske Veritas (DNV) (2005). Geotechnical design and installation of suction anchors in clay. DNV Recommended Practice RP-E303, Høvik.
7 
Houlsby, G. T. and Byrne, B. W. (2004). Calculation procedures for installation of suction caissons. Report of University of Oxford, No. OUEL2268/04, University of Oxford, UK.
8 
Jin, Z., Yin, Z. Y., Kotronis, P. and Jin, Y. F. (2017). "Numerical analysis of a suction bucket penetrating in sand with a combined Lagrangian–SPH approach." Procedia Engineering, Vol. 175, pp. 189-196.DOI
9 
Korea Electric Power Research Institute (KEPRI) (2013). Interim design basis report: Test bed for 2.5GW off-shore wind farm at Yellow Sea, Report No.:TM.9334. I2013.0703 (in Korean).
10 
Kim, B., Kim, Y., Jin, B., Bae, K. and Youn, H. (2016). "Numerical analysis on tilting control of suction pile for offshore wind power." Journal of the Korean Geo-Environmental Society, Vol. 17, No. 9, pp. 5-12 (in Korean).DOI
11 
Kim, D. J., Youn, J. U., Lee, K. Y., Jee, S. H. and Choo, Y. W. (2015). "Jacking penetration resistance of bucket foundations in silty sand using centrifuge modelling." Journal of the Korean Geo-Environmental Society, Vol. 31, No. 1, pp. 25-35 (in Korean).
12 
Kim, J., Jeong, Y. J. and Park, M. S. (2018a). "Comparison between structural behaviors of suction foundation for offshore cofferdam considering the lid joint characteristics." Proc. of the KAOSTS Conf., KAOSTS, pp. 79-82 (in Korean).
13 
Kim, J., Won, J., Kim, K. W. and Kim, M. K. (2017). "Penetration analysis of offshore wind turbine substructure foundation subjected to self-weight by a large deformation method." Proc. of the KSCE Conf., KSCE, pp. 638-639 (in Korean).
14 
Kim, J. H., Lee, S. T. and Kim, D. S. (2018b). "Evaluation of soil disturbance due to bucket installation in sand." Journal of the Korean Geotechnical Society, Vol. 34, No. 11, pp. 21-31 (in Korean).
15 
Kim, K., Kwon, O., Oh, M. and Jang, I. (2014a). "Investigation on the penetration resistance of suction bucket foundation in sand using model test." Journal of the Korean Geo-Environmental Society, Vol. 15, No. 6, pp. 75-83 (in Korean).DOI
16 
Kim, S. (2014). The development of finite element analysis technique to simulate the installation process of the suction caissons, Master Thesis, Kyunghee Univ. (in Korean).
17 
Kim, S., Choo, Y. W., Kim, D. S. and Sung, H. G. (2013). "Capacity of horizontally loaded suction anchor installed in silty sand." Journal of Ocean Engineering and Technology, Vol. 27, No. 1, pp. 59-66 (in Korean).DOI
18 
Kim, S., Choo, Y. W., Kwon, O. and Kim, D. S. (2014b). "Numerical analysis of group suction anchor of parallel arrangement installed in sand subjected to pullout load." Journal of the Korean Geo- Environmental Society, Vol. 30, No. 11, pp. 61-69 (in Korean).
19 
Kim, Y. S. and Jang, Y. S. (2011). "Analysis of load capacity and deformation behavior of suction pile installed in sand." Journal of the Korean Geotechnical Society, Vol. 27, No. 11, pp. 27-37 (in Korean).DOI
20 
Lee, J. H., Lee, S. H. and Kim, S. R. (2013). "Horizontal bearing behavior of group suction piles by numerical analysis." Journal of the Korean Geotechnical Society, Vol. 29, No. 11, pp. 119-127 (in Korean).DOI
21 
Madsen, S., Andersen, L. V. and Ibsen, L. B. (2013). "Numerical buckling analysis of large suction caissons for wind turbines on deep water." Engineering Structures, Vol. 57, pp. 443-452.DOI
22 
Na, S. H., Jang, I. S., Kwon, O. S. and Lee, S. H. (2014). "Study on pullout behavior of embedded suction anchors in sand using ALE (Arbitrary Lagrangian Eulerian) Technique." J. Korean Soc. Civ. Eng., Vol. 34, No. 1, pp. 167-173 (in Korean).DOI
23 
Park, C. S., Lee, J. H., Baek, D. H. and Do, J. U. (2014). "Design for installation of suction piles in sand deposits for mooring of floating offshore structures." Journal of the Korean Geotechnical Society, Vol. 30, No. 10, pp. 33-44 (in Korean).DOI
24 
Park, J., Park, D. and Han, Y. (2013). "Ultimate pullout bearing capacity of the suction pile using numerical analysis." Proc. of the KGES KGES, pp. 203-208 (in Korean).
25 
Ssenyondo, V., An, T. V. and Kim, S. R. (2017). "Numerical investigation on seepage stability of cut-off walls." Proc. of the KSCE Conf., KSCE, pp. 1556-1557.
26 
Tassoulas, J. L., Maniar, D. R. and Gonzalo Vasquez, L. F. (2005). Suction Caisson: Finite Element Modeling. University of Texas, Austin.
27 
Yoon, S. Y., Jang, H. S., Kim, H. S. and Kwak, Y. M. (2013). "Undrained bearing capacity of suction foundation by numerical analysis." Proc. of the KSCE Conf., KSCE, pp. 2658-2661 (in Korean).
28 
Zeinoddini, M., Mousavi, S. A. and Abdi, M. R. (2011). "Simulation of suction caisson penetration in seabed using an adaptive mesh technique." Procedia Engineering, Vol. 14, pp. 1721-1728.DOI