Mobile QR Code QR CODE : Journal of the Korean Society of Civil Engineers
1 
Givi, A. N., Rashid, S. A., Aziz, F. N. A. and Salleh, M. A. M. (2010). "Experimental investigation of the size effects of SiO2 nano- particles on the mechanical properties of binary blended concrete." Composites Part B: Engineering, Vol. 41, No. 8, pp. 673-677. 10.1016/j.compositesb.2010.08.003 DOI
2 
Haruehansapong, S., Pulngern, T. and Chucheepsakul, S. (2014). "Effect of the particle size of nanosilica on the compressive strength and the optimum replacement content of cement mortar containing nano-SiO2." Construction and Building Materials, Vol. 50, pp. 471-477. 10.1016/j.conbuildmat.2013.10.002 DOI
3 
Hossain, S. M., Park, M. J., Park, H. J., Tijing, L., Kim, J. H. and Shon, H. K. (2019). "Preparation and characterization of TiO2 generated from synthetic wastewater using TiCl4 based coagulation/ flocculation aided with Ca(OH)2." Journal of Environmental Management, Vol. 250, pp. 109521.
4 
Jansen, D., Goetz-Neunhoeffer, F., Stabler, C. and Neubauer, J. (2011). "A remastered external standard method applied to the quantification of early OPC hydration." Cement and Concrete Research, Vol. 41, No. 6, pp. 602-608. 10.1016/j.cemconres.2011.03.004 DOI
5 
Karapati, S., Giannakopoulou, T., Todorova, N., Boukos, N., Antiohos, S., Papageorgiou, D., Chaniotakis, E., Dimotikali, D. and Trapalis, C. (2014). "TiO2 functionalization for efficient NOx removal in photoactive cement." Applied Surface Science, Vol. 319, pp. 29-36. 10.1016/j.apsusc.2014.07.162 DOI
6 
Kim, J. B., Lee, K. W., Park, S. M., Shon, H. K., Shahid, M., Saliby, I. E., Lee, W. E., Kim, G. J. and Kim, J. H. (2013). "Preparation of iron-doped titania from flocculated sludge with iron-titanium composite coagulant." Journal of Nanoscience and Nanotechnology, Vol. 13, No. 6, pp. 4106-4109. 10.1166/jnn.2013.7017 DOI
7 
Liu, J., Li, Q. and Xu, S. (2015). "Influence of nanoparticles on fluidity and mechanical properties of cement mortar." Construction and Building Materials, Vol. 101, pp. 892-901. 10.1016/j.conbuildmat.2015.10.149 DOI
8 
Rhee, I. K., Lee, J. S., Kim, J. B. and Kim, J. H. (2018). "Nitrogen oxides mitigation efficiency of cementitious materials incorporated with TiO2." Materials, Vol. 11, No. 6, pp. 877. 10.3390/ma11060877 DOI
9 
Seo, J. H., Park, S. M., Yang, B. J. and Jang, J. G. (2019). "Calcined oyster shell powder as an expansive additive in cement mortar." Materials, Vol. 12, No. 8, pp. 1322. 10.3390/ma12081322 DOI
10 
Serpone, N. (2018). "Heterogeneous photocatalysis and prospects of TiO2-based photocatalytic DeNOxing the atmospheric environment." Catalysts, Vol. 8, No. 11, pp. 553. 10.3390/catal8110553 DOI
11 
Sugrañez, R., Álvarez, J. I., Cruz-Yusta, M., Mármol, I., Morales, J., Vila, J. and Sánchez, L. (2013). "Enhanced photocatalytic degradation of NOx gases by regulating the microstructure of mortar cement modified with titanium dioxide." Building and Environment, Vol. 69, pp. 55-63. 10.1016/j.buildenv.2013.07.014 DOI
12 
Yu, R., Spiesz, P. and Brouwers, H. J. H. (2014). "Effect of nano- silica on the hydration and microstructure development of Ultra- High Performance Concrete (UHPC) with a low binder amount." Construction and Building Materials, Vol. 65, pp. 140-150. 10.1016/j.conbuildmat.2014.04.063 DOI
13 
Zouzelka, R. and Rathousky, J. (2017). "Photocatalytic abatement of NOx pollutants in the air using commercial functional coating with porous morphology." Applied Catalysis B: Environmental, Vol. 217, pp. 466-476. 10.1016/j.apcatb.2017.06.009 DOI