Mobile QR Code QR CODE : Journal of the Korean Society of Civil Engineers
Journal of the Korean Society of Civil Engineers

Journal of the Korean Society of Civil Engineers

ISO Journal TitleKSCE J. Civ. Environ. Eng. Res.
  • Open Access, Bi-monthly

Journal Search

  1. Home
  2. All Issues
  3. 2022-06 (v.42 n.3)
  4. 10.12652/Ksce.2022.42.3.0299
XML PDF INFO REF

References

1 
American Association of State Highway and Transportation Officials (AASHTO) (1995). "AASHTO LRFD bridge design specifications", 1st edition, AASHTO, Washington, DC.Google Search
2 
American Association of State Highway and Transportation Officials (AASHTO) (2014). "AASHTO LRFD bridge design specifications", 7th edition, AASHTO, Washington, D.C., USA.Google Search
3 
Ellingwood B., Galambos T. V., MacGregor J. G., Cornell C. A. (1980). "Development of a probability based load criterion for american national standard A58: Building code requirements for minimum design loads in buildings and other structures", NBS Special Publication 577 Washington D.C. USAGoogle Search
4 
European Committee for Standardization (CEN) (2002). "Eurocode 0: Basis of structural design EN 1990", Brussels, BelgiumGoogle Search
5 
Haldar A., Mahadevan S. (2000). "Probability, reliability and statistical methods in engineering design", John Wiley & Sons, Inc., New York, USA, pp. 181-224Google Search
6 
Hwang E. S. (2008). "Development of live load model for reliability- based design code", KBRC TRS 034, Korea Bridge Besign & Engineering Research Center, Seoul National University, Seoul (in Korean)Google Search
7 
Kim J. H., Lee J. H. (2000). "Material resistance factors for reinforced concrete flexural and compression members.", Journal of the Korea Concrete Institute, KCI, Vol. 12, No. 2, pp. 21-30 (in Korean)Google Search
8 
Kim S. S. (2018). "Unified code calibration for short-to medium- span and long-span bridges with new vehicular live load model", Master thesis, Seoul National UniversityGoogle Search
9 
Lee H. S. (2019). "Reliability-based load-resistance factors", Kimoondang (in Korean)Google Search
10 
Lee H. S., Kim J. H. (2019). "Wind pressure statistics and target reliability index for wind load-governed limit state of reliability-based bridge design codes.", KSCE Journal of Civil Engineering, KSCE, Vol. 23, No. 5, pp. 2263-2271DOI
11 
Lee H. S., Bae C. H., Kim J. H. (2018). "Assessment of reliability levels and adjustment of load-resistance factors using optimization for gravitational loads-governed limit states of the AASHTO LRFD bridge design specifications.", KSCE Journal of Civil Engineering, KSCE, Vol. 22, No. 9, pp. 3462-3472DOI
12 
Lee H. S., Song S. W., Kim J. H. (2019a). "New approaches for calibrating material factors of reinforced concrete members in korean highway bridge design code (Limit State Design) and reliability analysis.", Journal of the Korean Society of Civil Engineers, KSCE, Vol. 39, No. 1, pp. 13-24 (in Korean)DOI
13 
Lee H. S., Song S. W., Kim J. H. (2019b). "Determination of optimal load-resistance factors for gravitational loads-governed limit state of Korean bridge design code.", KSCE Journal of Civil Engineering, KSCE, Vol. 23, No. 8, pp. 3451-3463DOI
14 
Lee S. H. (2014). "Calibration of the load-resistance factors for the reliability-based design of cable-supported bridges", Ph. D. Thesis, Seoul National University (in Korean)Google Search
15 
Ministry of Construction and Transportation (MOCT). (1996). "Korean highway bridge design code (Appendix) - load-resistance factor design KSCE (in Korean", KSCE (in Korean)Google Search
16 
Ministry of Land Infrastructure and Transport (MOLIT). (2015a). "Korean highway bridge design code (limit state design)", minor revision (in Korean)Google Search
17 
Ministry of Land, Infrastructure and Transport (MOLIT) (2015b). "Korean highway bridge design code (limit state design)-cable- supported bridges(in Korean)"Google Search
18 
Ministry of Land, Infrastructure and Transport (MOLIT) (2016). "Korean highway bridge design code (limit state design)-cable- supported bridges", minor revision (in Korean)Google Search
19 
Ministry of Land, Transport and Maritime Affairs (MLTM) (2012). "Korean highway bridge design code (Limit State Design) (in Korean)"Google Search
20 
Nowak A. S. (1999). "Calibration of LRFD bridge design code", NCHRP Report 368, Transportation Research Board, Washington, D.C., USAGoogle Search
21 
Paik I. Y., Hwang E. S., Shin S. B. (2009). "Reliability analysis of concrete bridges designed with material and member resistance factors.", Computers and Concrete Techno-Press, Vol. 6, No. 1, pp. 59-78DOI
22 
Shin D. K., Kim C. Y., Paik I. Y. (2006). "Reliability analysis of composite girder designed by LRFD method for positive flexure.", Journal of the Korean Society of Civil Engineers, KSCE, Vol. 26, No. 3a, pp. 539-546 (in Korean)URL
23 
Structural Analysis Lab (STRANA) (2021). "Target reliability index for gravitation-load governed limit states", Available at: http://strana.snu.ac.kr/beta/Supplement/SMJ-RILS1-2.pdf (Accessed: November 19, 2021) (in Korean).URL