|
Title |
An Evaluation of Clamping Characteristics for High Strength Bolts with Variable Bolt Lengths
|
|
Authors |
이강민 ; 김강석 ; 나환선 ; 이현주 ; 오경환 |
|
Keywords |
고력볼트 ; 길이 ; 축력 ; 토크 ; 너트회전각 High strength bolt ; Length parameter ; Tension ; Torque ; Turn of nut |
|
Abstract |
It has been reported that the length parameter of high strength bolts results in the variance in tensile loads. The required turn of nut for each length is specified in AISC RCSC specification. There is no specific regulation datum about the bolt length in the two national codes and specifications in Korea. Therefore this study focused on evaluating influence of the clamping torque subjected to length parameter of high strength bolts. Two types of high strength bolt specimens were manufactured and tested; High Strength Hexagon bolt specified in ASTM A490 and Torque Shear Bolt in KS B 2819. The length parameter ranged from 60mm(3d) to 140mm(7d). The torque, turn of nut, and the clamping force were analyzed to review whether length parameter affects on the required tensile strength. To evaluate the effects of the length parameter on the torque and turn of nut for the required strength and clamping force, statistical analysis was also carried out.
|