|
Title |
Negative Support Reactions of the Single Span Twin-Steel Box Girder Curved Bridges with Skew Angles
|
|
Keywords |
강박스 ; 곡선교 ; 부반력 ; 곡선반경 ; 사각 ; 받침간격 ; Twin-steel box girder ; Curved bridge ; Negative reaction ; Radius of curvature ; Skew angle ; Spacing of shoes |
|
Abstract |
The behaviors of the curved bridges which has been constructed in the RAMP or Interchange are very complicate and different than orthogonal bridges according to the variations of radius of curvature, skew angle and spacing of shoes. Occasionally, the camber of girder and negative reactions can be occurred due to bending and torsional moment. In this study, the effects on the negative reaction in the curved bridge were investigated on the basis of design variables such as radius of curvature, skew angle, and spacing of shoes. For this study, the twin-steel box girder curved bridge with single span which is applicable for the RAMP bridges with span length(L) of 50.0m and width of 9.0m was chosen and the structural analysis to calculate the reactions was conducted using 3-dimensional equivalent grillage system. The value of negative reaction in curved bridges depends on the plan structures of bridges, the formations of structural systems, and the boundary conditions of bearing, so, radius of curvature, skew angle, and spacing of shoes among of design variables were chosen as the parameter and the load combination according to the design standard were considered. According to the results of numerical analysis, the negative reaction in curved bridge increased with an decrease of radius of curvature, skew angle, and spacing of shoes, respectively. Also, in case of skew angle of 60° the negative reaction has been always occurred without regard to θ/B, and in case of skew angle of 75° the negative reaction hasn’t been occurred in θ/B below 0.27 with the radius of curvature of 180m and in θ/B below 0.32 with the radius of curvature of 250m, and in case of skew angle of 90° the negative reaction hasn’t been occurred in the radius of curvature over 180m and in θ/B below 0.38 with the radius of curvature of 130m, The results from this study indicated that occurrence of negative reaction was related to design variables such as radius of curvature, skew angle, and spacing of shoes, and the problems with the stability including negative reaction will be expected to be solved as taken into consideration of the proper combinations of design variables in design of curved bridge.
|