Title |
Reduction of Prestress Loss in PSC (Prestressed Concrete) Continuous Girder by Employing Block-out Method
|
Authors |
신경준 ; 김윤용 ; 김승진 ; 추태헌 ; 이환우 |
Keywords |
PSC 거더 ; 연속화 ; 긴장력 손실 PSC girder ; Continuous span ; Prestresss loss |
Abstract |
Prestressed concrete girder bridge has been one of the most widely used bridges in the world because of its excellent construction feasibility, economic efficiency, serviceability, and safety. In certain situations, the prestressing tendon is supposed to be bent by the construction error and the radius of curvature at the continuous joint of PSC girders, and this leads to the loss of prestressing force. However, this kind of prestress loss is not considered in the design and construction processes. This study proves that the prestress loss occurs at the continuous joint due to the local bending of tendon by the construction error or the radius of curvature. Also, a method that can reduce this type of prestress loss is proposed, and proved by the experiment. The result shows that maximum 10% of prestress loss occurs at the continuous joint and the proposed block-out method can reduce the prestress loss ratio by maximum 5%, approximately. This means that the block-out method can enhance the prestressing efficiency of continuous PSC girder bridges.
|