|
Title |
Study on the Development of Finishing Design Methods for Building Structures Using the Metal Films
|
|
Authors |
임지택(Ji-Taek Lim) ; 정화랑(Hwa-Rang Jung) |
|
DOI |
https://doi.org/10.11112/jksmi.2018.22.1.183 |
|
Keywords |
금속피막 ; 마감재 ; 마감 의장 기법 ; 금속용사 ; 콘크리트 Concrete ; Metal films ; Metal spray ; Finishing design methods ; Finshing material |
|
Abstract |
In this study, the bond strength between concrete and metal films was investigate according to changing water content ratio of substrate concrete by pull-out test in order to develop the new finishing design methods for building structures using the metal films. The following conclusions were obtained as a result of the studies. It was find that the colour of metal did not change before and after the metal spraying. Also, the water content ratio of substrate concrete must be controlled under 10% weight to confirm the standard bond strength of finishing material to concrete. 2.5 MPa. To enhance the bond strength between concrete and metal films, it is very effective to strengthen the concrete surface using the agent which strengthen the concrete surface and seal the pore of metal film by the sealing agents. Therefore, the control of concrete surface treatment and water content ratio are necessary to secure the bond strength of metal films.
|