Title |
The Physical Properties of Port Type Crack Injection Method Using Latex Elastic Storage Tube
|
Authors |
김은영(Eun-Young Kim) ; 소광호(Kwang-Ho Sho) |
DOI |
https://doi.org/10.11112/jksmi.2018.22.2.068 |
Keywords |
라텍스 탄성 저장관 ; TPS 공법 ; 균열보수 ; 에폭시 ; 충진공법 ; 균열 Latex elastic storage tube ; TPS method ; Crack repair ; Injection method ; Crack |
Abstract |
In this study, to solve the problems of the conventional crack repair and injection method, high elasticity latex was used as the material of the storage tube to withstand the high pressure in the center part differently from the general port. When the repair solution was injected into the crack part, The TPS method was developed so that the air existing in the TPS can be discharged. In addition, a new infusion port in which a valve blocking the backflow of the remediation solution was installed at the injection port was developed and the physical characteristics of the port were analyzed. As a result of the evaluation, it was found that the filling rate of the remedial solution was improved compared to the existing ordinary injector method, and the cracks were completely filled in the test conditions. Compressive strength and tensile strength after repair showed about 20% decrease after repair in case of using ordinary injector method, while TPS method showed about 2~7% increase after repair. The results of this study showed that the injection port method using the elastic storage tube increased the injection performance and the quality after repair compared to the conventional injector method. The result of this study is expected to be utilized as the basic data for application and commercialization of the result to the practical structure.
|