|
Title |
Slab Construction Load Distribution in a Multistory-shored RC Structure System with Different Slab Thickness
|
|
Authors |
한상민(Sang-Min Han) ; 김재요(Jae-Yo Kim) |
|
DOI |
https://doi.org/10.11112/jksmi.2024.28.2.17 |
|
Keywords |
슬래브 시공하중; 다층지지 RC 구조; 슬래브 두께 변화 Slab construction load; Multistory-shored RC structure system; Different slab thickness |
|
Abstract |
In recent times, accidents involving structural elements, formwork, and shore have been persistently occurring during concrete pouring, especially in multi-story reinforced concrete (RC) structures. In previous studies, research on construction load analysis was mainly conducted for cases where the thickness of all slabs is constant. However, when the thickness of some slabs is different, the variation in the stiffness of slab cross-sections can lead to different distributions of construction loads, necessitating further investigation. In this study, the slab thickness was set as a variable, and the analysis of the distribution of construction loads was conducted, taking into account the influence of changes in slab thickness on the concrete stiffness and structure. It was confirmed that not only the concrete material stiffness but also the slab cross-section stiffness should be considered in the estimation of construction loads when the slab thickness changes. As the slab thickness increases, the maximum construction load and maximum damage parameter on the layer with increased thickness significantly increase, and it was observed that a thicker slab results in a higher proportion of construction load.
|