| Title |
A Study on the Heat Flux Meter Location for the Performance Test of a Refrigerator Vacuum Insulation Panel |
| DOI |
http://dx.doi.org/10.6110/KJACR.2013.25.8.471 |
| Keywords |
냉장고 ; 진공단열재 ; 열유속계 ; 정상 작동 ; 비정상 작동 ; 기울기 Refrigerator ; Vacuum insulation panel ; Heat flux meter ; Normal condition ; Abnormal condition ; Gradient ; |
| Abstract |
The present study has been carried out to elucidate the optimal method for the performance test of a refrigerator vacuum insulation panel (VIP), by using numerical heat transfer analysis. Three locations of heat flux meter have been tested, for deriving the best test method to clarify the normal or the abnormal condition of the vacuum insulation panel in a refrigerator. The first location of the heat flux sensor is at the same place as the heater, the second one is at the nearby side location of the heater and the third one is at the opposite side location of heater in the refrigerator. The heat flux and 1/q" 2 or q" 4 were calculated for the cases with the normal VIP, and with the abnormal VIP, and their differences analyzed. From the present study, the first and the second method had a mere difference characteristics of heat flux and 1/q" 2 or q" 4, between the cases with the normal or the abnormal VIP. The magnitude of the heat flux after 300sec had a great difference between the cases with the normal or abnormal VIP for the third method, and it could be considered the most optimal method to test the performance of a refrigerator vacuum insulation panel. |