Mobile QR Code QR CODE
Export citation EndNote
1 
1.Choi, W. H., Park, C. W., Jung, W. K., Jeon, B. J., and Kim, G. S., “Durability characteristics of limestone powder added concrete for environment-friendly concrete,” Journal of Korea Institute for Structural Maintenance Inspection, Vol. 16, No. 5, 2012, pp. 59-67.DOI
2 
2.Yang, K. H., Sim, J. I., Song, J. G., and Lee, J. H., “Material properties of slag-based alkali-activated concrete brick-masonry,” Journal of the Architectureal Institute of Korea Structure & Construction, Vol. 27, No. 1, 2011, pp. 11-126.Google Search
3 
3.Choi, S. W., Ryu, D. H., Kim, H. S., and Kim, G. Y., “Hydration properties of low carbon type low heat blended cement,” Journal of the Korea Institute of Building Construction, Vol. 13, No. 3, 2013, pp. 218-226.DOI
4 
4.Cho, C. G., Lim, H. J., Yang, K. H., Song, J. K., and Lee, B. Y., “Basic mixing and mechanical tests on hihg ductile fiber reinforced cementless composites,” Journal of the Korea Concrete Institute, Vol. 24, No. 2, 2012, pp. 121-127.DOI
5 
5.Hester, D., Mcnally, C., and Richardson, M. G., “Study of influence of slag alkali level on the alkali-silica reactivity of slag concrete,” Construction and Building Materials, Vol. 19, No. 9, 2005, pp. 661-665.DOI
6 
6.Leng, F., Feng, N., and Lu, X., “An experiment study on the properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete,” Cement and Concrete Research, Vol. 30, 2000, pp. 989-992.DOI
7 
7.Koh, K. T., Yoo, W. W., and Han, S. M., “A study on strength development and resistance to sulfate attack of mortar incor-porating limestone powder,” Journal of the Korea Concrete Institute, Vol. 16, No. 3, 2004, pp. 303-310.DOI
8 
8.Mindess, S., Young, J. F., and Darwin, D., Concrete, 2th ed., Rentice Hall, New Jersey, 2003, 644pp.Google Search
9 
9.Mehta, P. K. and Monteiro, P. J. M., Concrete, microstructure, properties, and materials, 3th. ed., McGraw-Hill, New-York, 2004, 659pp.Google Search
10 
10.Ryu, D. W., Kim, W. J., Yang, W. H., You, J. H., and Ko, J. W., “An experimental study on the freezing-thawing and chloride resistance of concrete using high volumes of GGBS,” Journal of the Korea Institute of Building Construction, Vol. 12, No. 3, 2012,  pp. 315-322.Google Search
11 
11.Ryu, D. W., Kim, W. J., Yang, W. H., and Park, D. C., “An experimental study on the carbonation and drying shrinkage of concrete using high volumes of ground granulated blast- furnace slag,” Journal of the Korea Institute of Building Construction, Vol. 12, No. 4, 2012,  pp. 393-400.Google Search
12 
12.Kwon, Y. J., “An experimental study on the carbonation and drying shrinkage of high strength concrete according to kinds and ratios of mineral admixtures,” Journal of the Korea Institute of Building Construction, Vol. 3, No. 3, 2003, pp. 127-133.DOI
13 
13.Jung, J. D., Cho, H. D., and Park, S. W., “Properties of hydration heat of high-strength concrete and reduction strategy for heat production,” Journal of the Korea Institute of Building Construction, Vol. 12, No. 2, 2012, pp. 203-210.DOI
14 
14.Gengying, L. and Xiaohua, Z., “Properties of concrete incor-porating fly ash and ground granulated blast-furnace slag,” Cement and Concrete Composites, Vol. 25, 2003, pp. 293-299.DOI
15 
15.Kim, S. D., Kim, S. Y., Bae, K. S., Park, S. H., and Lee, B. S., “Field application of 80㎫ high strength fire resistant concrete using ternary blended cement,” Journal of the Korea Institute of Building Construction, Vol. 10, No. 5, 2010, pp. 113-119.DOI
16 
16.Chong, W., Changhui, Y., Fang L., Chaojun, W., and Xincheng, P., “Preparation of ultra-high performance concrete with common technology and materials,” Cement and Concrete Composites, Vol. 34, 2012,  pp. 538-544.Google Search
17 
17.Kang, H., Ahn, J. M., and Shin, S. W., “Evaluation on mechanical and mixing properties of ultra-high strength concrete with fck=150MPa,” Journal of the Korea Institute of Building Construction, Vol. 10, No. 3, 2010, pp. 113-120.DOI
18 
18.Halit, Y., Mert, Y., Hüseyin, Y., Serdar, A., and Selcuk, T., “Mechanical properties of reactive powder concrete containing high volumes of ground granulated blast furnace slag,” Cement and Concrete Composites, Vol. 32, 2010, pp. 639-648.DOI
19 
19.Siddique, R. and Bennacer, R., “Use of iron and steel industry by-product(GGBS) in cement paste and mortar,” Resources Conservation and Recycling, Vol. 69, 2012, pp. 29-34.DOI
20 
20.KS L 5201:2013,  Portland cement, KSA.Google Search
21 
21.KS F 2563:2009, Ground granulated blast-furnace slag for use in concrete, KSA.Google Search
22 
22.KS L ISO 679:2006, Methods of testing cements – Deter-mination of strength, KSA.Google Search
23 
23.ASTM C230/C230M:13, Standard specification for flow table for use in tests of hydraulic cement, ASTM.Google Search
24 
24.KS L ISO 9597:2009, Determination of setting time and soundness of cements, KSA.Google Search
25 
25.KS L 5121:2007, Testing method for heat of hydration of hydraulic cement, KSA.Google Search
26 
26.ASTM D4284:12, Standard test method for determining pore volume distribution of catalysts and catalyst carrier by mercury intrusion porosimetry, ASTM.Google Search
27 
27.Escalante, J. I., Gómez, L. Y., Johal, K. K., Mendoza, G., Mancha, H., and Méndez, J., “Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions,” Cement and Concrete Research, Vol. 31, 2001, pp. 1403-1409.DOI
28 
28.Ballim, Y. and Graham, P. C., “The effects of supplementary cementing materials in modifying the heat of hydration of concrete,” Materials and Structures, Vol. 42, 2009, pp. 803-811.DOI
29 
29.You, C. D., Hyun, S. H., and Song, J. T., “Rheological properties of cement paste containing ultrafine blastfurnace slag,” Journal of the Korean Ceramic Society, Vol. 44, No. 8, 2007, pp. 430-436.DOI
30 
30.Wainwright, P. J. and Ait-Aider, H., “The influence of cement source and slag additions on the bleeding of concrete,” Cement and Concrete Research, Vol. 25, No. 7, 1995, pp. 1445-1456.DOI
31 
31.Olorunsogo, F. T., “Particle size distribution of GGBS and bleeding characteristics of slag cement mortars,” Cement and Concrete Research, Vol. 28, No. 6, 1998, pp. 907-919.DOI
32 
32.Lee, K. M., Kwon, K. H., Lee, H. K., Lee, S. H., and Kim, G. Y., “Characteristics of autogenous shrinkage for concrete containing blast-furnace slag,” Journal of the Korea Concrete Institute, Vol. 16, No. 5, 2004, pp. 621-626.DOI
33 
33.Escalante-Garcia, J. I. and Sharp, J. H., “Effect of temperature on the hydration of the main clinker phases in portland cements: Part II. Blended cements,” Cement and Concrete Research, Vol. 28, 1998, pp. 1259-1274.DOI
34 
34.Copeland, L. E. and Kantro, D. L., “Hydration of Portland cement,” 5th International Symposium on the Chemistry of Cement, Vol. 2, 1968, pp. 378-420.Google Search
35 
35.Narayanan, N., “Quantifying the effects of hydration enhan-cement and dilution in cement pastes containing coarse glass powder,” Journal of Advanced Concrete Technology, Vol. 6, No. 3, 2008, pp. 397-408DOI
36 
36.De Schutter, G., “Effect of limestone filler as mineral addition in self-compacting concrete,” 36th Conference on OUR WORLD IN CONCRETE & STRUCTURES, 2011, http://cipremier.com/100036006Google Search
37 
37.Hesam, M., Alireza, B., and Tayebeh, P., “The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of Portland cement,” Cement and Concrete Research, Vol. 42, 2012, pp. 1563-1570.DOI
38 
38.Liu, R. G., Han, F. H., and Yan, P. Y., “Characteristics of two types of C-S-H gel in hardened complex binder pastes blended with slag,” Science China Technological Sciences, Vol. 56, No. 6, 2013, pp. 1359-1402DOI
39 
39.Shi, C., Krivenko, P. V., and Roy, D., Alkali-activated cement and concretes, Taylor & Francis, New York, 2006, 376pp.DOI
40 
40.Hogan, F. J. and Meusel, J. W., “Evaluation for durability and strength development of a ground granulated blast furnace slag,” Cement, Concrete and Aggregate, Vol. 3, No. 1, 1981, pp. 40-52.DOI
41 
41.Oner, A. and Akyuz, S., “An experimental study on optimum usage of GGBS for the compressive strength of concrete,” Cement and Concrete Composites, Vol. 29, No. 6, 2007, pp. 505-514.DOI
42 
42.McNally, C. and Sheils, E., “Probability-based assessment of the durability characteristics of concretes manufactured using CEM II and GGBS binders,” Construction and Building Materials, Vol. 30, 2012, pp. 22-29.DOI
43 
43.Oey, T., Kumar, A., Bullard, J. W., and Neithalath, N., “The filler effect : The lnfluence of filler content and surface area on cementitious reaction rates,” Journal of the American Ceramic Society, Vol. 96, No. 6, 2013, pp. 1978-1990DOI
44 
44.Ramezanianpour, A. A. and Malhotra, V. M., “Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume,” Cement and Concrete Composites, Vol. 17, 1995, pp. 125-133.DOI