JKCI
Journal of
the Korea Concrete Institute
KCI
Contact
Open Access
Bi-monthly
ISSN : 1229-5515 (Print)
ISSN : 2234-2842 (Online)
http://www.jkci.or.kr/jkci
Mobile QR Code
Journal of the Korea Concrete Institute
ISO Journal Title
J Korea Concr Inst.
SCOPUS
KCI Accredited Journal
Main Menu
Main Menu
저널소개
About Journal
최근호
Current Issue
논문집
All Issues
목적 및 범위
Aims and Scope
편집위원회
Editorial Board
논문투고안내
Instructions to Authors
출판정책
Publishing Policies
연락처
Contact Info
논문투고
Online-Submission
Journal Search
Home
All Issues
2018-12
(Vol. 30 No.6)
10.4334/JKCI.2018.30.6.573
Journal XML
Export citation
EndNote
XML
PDF
INFO
REF
1
ACI Committee 318 (2014) Building Code Requirements for Structural Concrete and Commentary (ACI 318-14). American Concrete Institute, Detroit, 519.
2
Clark, A. P. (1951) Diagonal Tension in Reinforced Concrete Beams. Proceedings of ACI Journal 48(2), 145-156.
3
Comite European De Normalisation (CEN), (2004) Eurocode 2: Design of Concrete Structures, Part 1-1 General Rules and Rules for Buildings (BS EN 1992-1-1). Lausanne, Switzerland, 211.
4
CSA Committee A23.3-14, (2014) Design of Concrete Structures for Buildings (CAV3-A23.3-14). Canadian Standards Association, Toronto, ON, Canada, 291.
5
Elligwood, B., Galambos, T. V., MacGregor, J. G., and Cornell, C. A. (1980) Development of a Probability Based Load Criterion for American National Standard A58, NBS Special Publication 577, National Bureau of Standards, USA, 222 pp.
6
Elstner, R. C., Moody, K. G., Viest, I. M., and Hognestad, E. (1955) Shear Strength of Reinforced Concrete Beams. Part3-Tests of Restrained Beams with Web Reinforcement. Proceedings of ACI Journal 51(6), 525-539.
7
Guralnick, S. A. (1960) High-Strength Deformed Steel Bars for Concrete Reinforcement. ACI Journal, Proceedings 57(3), 241-282.
8
Haddadin, M. J., Hong, S.-T., and Mattock, A. H. (1971) Stirrup Effectiveness in Reinforced Concrete Beams with Axial Force. Proceedings, ASCE, 97(ST 9), 2277-2297.
9
Japan Society of Civil Engineering (2007) Standard Specifications for Concrete Structures. Japan Society of Civil Engineering, Japan, 469.
10
Jeong, H.-W., Lee, J.-H., Choi, J.-H., Hwang, D.-K., and Bae, J.-J. (2012) A Safety of Design Shear Strength for Beams by Limit State Design. Proceeding of the Korea Concrete Institute 29(2), 445-446. (in Korean)
11
KCI (2012) Concrete Design Code-2012, Korean Concrete Institute, 342. (in Korean)
12
KCI (2016) KCI Manual of Concrete Practice, KCI PM103.1-16, Korean Concrete Institute, 322. (in Korean)
13
Kim, J.-H. and Lee, J.-H. (2000) Material Resistance Factors for Reinforced Concrete Flexural and Compression Members. Journal of the Korea Concrete Institute 12(2), 21-30. (in Korean)
14
Kim, W. (2015) Limit State Design of Concrete Structures, Donghwa Technology Publishing Co., 692. (in Korean)
15
Kokusho, S., Kobayashi, K., Mitsugi, S., and Kumagai, H. (1987) Ultimate Shear Strength of RC Beams with High Tension Shear Reinforcement and High Strength Concrete. Journal of Structural Construction Engineering, Architectural Institute of Japan 373, 83-91.
16
KSCE (2015) Limit State Design of Concrete Bridges. Korean Society of Civil Engineering, Seoul, 169. (in Korean)
17
Lee, J.-H. (2015) Prestressed Concrete : Ultimate Strength Design & Limit State Design. Dongmyeong Publishing Co., 858. (in Korean)
18
Lee, J.-H. Lim, K.-S., and Hwang, D.-K. (2011) Compressive Stress Distribution of Concrete for Performance-Based Design Code. Journal of the Korea Concrete Institute 23(3), 365-376. (in Korean)
19
Lee, J.-Y. and Choi, I.-J. (2011) Shear Behavior of Reinforced Concrete Beams with High-Strength Stirrups. ACI Structural Journal 108(5), 620-629. (in Korean)
20
Lee, J.-Y. and Hwang, H.-B. (2010) Maximum Shear Reinforcement of Reinforced Concrete Beams," ACI Structural Journal 107(5), 580-588. (in Korean)
21
Lee, J.-Y., Kim, S.-W., and Mansour, Y. M. (2010) Nonlinear Analysis of Shear‐Critical Reinforced Concrete Beams Using Fixed Angle Theory Journal of Structural Engineering-ASCE, 137(10), 1017-1029. (in Korean)
22
Lee, J.-Y., Lee, D. H, Lee, J.-E., and Choi, S.-H. (2015) Shear Behavior and Diagonal Crack Width for RC Beams with High Strength Shear Reinforcement. ACI Structural Journal 112(3), 323-334. (in Korean)
23
MacGregor, J. G. (1976) Safety and Limit States Design for Reinforced Concrete, Canadian Journal of Civil Engineering 3(4), 484-513.
24
MacGregor, J. G. (2005) Reinforced Concrete Mechanics and Design 3rd Edition, Prentice Hall, 939.
25
Makitani, E. and Shindou, K. (1993) Shear Resistance of Concrete Beams with High Strength Web Reinforcements. JCI Proceedings 15(2), 461-466.
26
Mansour, Y. M., Hsu T. T. C., and Lee, J.-Y. (2001) Pinching effect in hysteretic loops of R/C shear elements, ACI SP 205: Deterioration Analysis of RC Structures under Cyclic Loading, American Concrete Institute, MI, 293-321.
27
Matsuzaki, Y., Nakano, K., Iso, M., and Watanabe, H. (1990) Experimental Study on Shear Characteristic of RC Beams with High Tension Shear Reinforcement. JCI Proceedings 12(2), 325-328.
28
Mattock, A. H. and Wang, Z. (1984) Shear Strength of Reinforced Concrete Members Subject to High Axial Compressive Stress. ACI Structural Journal 81(3), 287-298.
29
Moretto, O. (1945) An Investigation of the Strength of Welded Stirrups in Reinforced Concrete Beams. Proceedings of ACI Journal 42(2), 141-162.
30
Placas, A. and Regan, P. E. (1971) Shear Failure of Reinforced Concrete Beams. Proceedings of ACI Journal 68(10), 763-773.
31
Reineck, K.-H., Bentz, E. C., Fitik, B., Kuchma, D. A., and Bayrak O. (2014) ACI-DAfStb Database of Shear Tests on Slender Reinforced Concrete Beams with Stirrups ACI Structural Journal 111(5), 1147-1156.
32
Reineck, K.-H., Bentz, E. C., Fitik, B., Kuchma, D. A., and Bayrak, O. (2013) ACI-DAfStb Database of Shear Tests on Slender Reinforced Concrete Beams without Stirrups ACI Structural Journal 110(5), 867-875.
33
Takagi, H., Okude, H., and Nitta, T. (1989) Shear Strength of Beam Depending the Strength of Web Reinforcements. JCI Proceedings 17(2), 75-80.
34
Yang, C., Tshmura, K., and Yoshimura, M. (1993) Shear Failure Tests of Beams Made of Ultra-High-Strength Materials. JCI Proceedings 15(2), 27-32.