Mobile QR Code QR CODE
Export citation EndNote

References

1 
ACI Committee 318 , 2014, Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, USA, MI: American Concrete InstituteGoogle Search
2 
Bastien-Masse M., Brühwiler E., 2016, Experimental Investigation on Punching Resistance of R-UHPFRC-RC Composite Slabs, Materials and Structures, Vol. 49, No. 5, pp. 1573-1590DOI
3 
CEN , 2004, Eurocode 2: Design of Concrete Structures – Part 1-1: General Rules and Rules for Buildings, Belgium, Brussels: European Committee for StandardizationGoogle Search
4 
Choi K. K., Park H. G., 2010, Shear Strength Model for Interior Flat Plate-Column Connections, Journal of the Korea Concrete Institute, Vol. 22, No. 3, pp. 345-356DOI
5 
Farghaly A. S., Ueda T., 2011, Prediction of Punching Shear Strength of Two-Way Slabs Strengthened Externally with FRP Sheets, Journal of Composites for Construction, Vol. 15, No. 2, pp. 181-193DOI
6 
Faria D. M. V., Einpaul J., Ramos A. M. P., Fernández Ruiz M., Muttoni A., 2014, On the Efficiency of Flat Slabs Strengthening Against Punching using Externally Bonded Fibre Reinforced Polymers, Construction and Building Materials, Vol. 73, pp. 366-377DOI
7 
Guandalini S., Burdet O. L., Muttoni A., 2009, Punching Tests of Slabs with Low Reinforcement Ratios, ACI Structural Journal, Vol. 106, No. 1, pp. 87-95Google Search
8 
Hor Y., Teo W., Kazutaka S., 2017, Experimental Investigation on the Behaviour of Reinforced Concrete Slabs Strengthened with Ultra-High Performance Concrete, Construction and Building Materials, Vol. 155, pp. 463-474DOI
9 
Kang S. T., Kim J. K., 2011, The Relation Between Fiber Orientation and Tensile Behavior in an Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRCC), Cement and Concrete Research, Vol. 41, No. 10, pp. 1001-1014DOI
10 
Koppitz R., Kenel A., Keller T., 2013, Punching Shear of RC Flat Slabs-Review of Analytical Models for New and Strengthening of Existing Slabs, Engineering Structures, Vol. 52, pp. 123-130DOI
11 
Korea Concrete Institute (KCI) , 2012, Concrete Design Code and Commentary, Korea, Seoul: Kimoondang Publishing CompanyGoogle Search
12 
Korea Concrete Institute (KCI) , 2015, Design Recommendations for Ultra- High Performance Concrete K-UHPC Structure, Korea, Seoul: Korea Concrete InstituteGoogle Search
13 
Lim W. Y., Hong S. G., 2016, Slant Shear Test for Determining the Interfacial Shear Strength of Concrete Strengthened with Ultra-High Performance Fiber Reinforced Concrete, Journal of the Korea Concrete Institute, Vol. 28, No. 6, pp. 637-646DOI
14 
Moehle J. P., 2015, Seismic Design of Reinforced Concrete Buildings, New York: McGraw-Hill Education, pp. 379-410Google Search
15 
Muttoni A., 2008, Punching Shear Strength of Reinforced Concrete Slabs without Transverse Reinforcement, ACI Structural Journal, Vol. 105, No. 4, pp. 440-450Google Search
16 
Tsioulou O. T., Lampropoulos A. P., Dritsos S. E., 2013, Experimental Investigation of Interface Behaviour of RC Beams Strengthened with Concrete Layers, Construction and Building Materials, Vol. 40, pp. 50-59DOI
17 
Wuest J., 2007, Comportement structural des bétons de fibres ultra performants en traction dans des éléments composes, Doctoral dissertation. EPFL de LausanneDOI
18 
Youm H. S., Lim W. Y., Hong S. G., Joh C. B., 2018, Evaluation of Interfacial Performance of Normal Strength Concrete Strengthened with Ultra-High Performance Fiber Reinforced Concrete through Slant Shear Test, Journal of the Korea Concrete Institute, Vol. 30, No. 4, pp. 391-401DOI