Mobile QR Code QR CODE
Export citation EndNote

References

1 
ACI-ASCE Committee 445 , 2002, Examples for the Design of Structural Concrete with Strut-and-Tie Models, SP-208. American Concrete Institute, Farmington Hills, Michigan, USAGoogle Search
2 
ACI-ASCE Committee 445 , 2010, Further Examples for the Design of Structural Concrete with Strut-and-Tie Models, SP-273. American Concrete Institute, Farmington Hills, Michigan, USAGoogle Search
3 
Alshegeir A., 1992, Analysis and Design of Disturbed Regions with Strut-Tie Models, Ph.D Dissertation, School of Civil Engineering, Purdue University, Indiana, USAGoogle Search
4 
American Association of State Highway and Transportation Officials , 2018, AASHTO LRFD Bridge Design Specifications, 8th Edition, Washington D.C., USAGoogle Search
5 
American Concrete Institute , 2014, Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, Farmington Hills, Michigan, USAGoogle Search
6 
Bergmeister K., Breen J. E., Jirsa J. O., 1991, Dimensioning of the Nodes and Development of Reinforcement, IABSE Colloquium, Report, International Association for Bridge and Structural Engineering, Zurich, SwitzerlandGoogle Search
7 
Bergmeister K., Breen J. E., Jirsa J. O., Kreger M. E., 1993, Detailing in Structural Concrete, Research Report 1127-3F, Center for Transportation Research, University of Texas at Austin, Texas, USAGoogle Search
8 
Canadian Standards Association , 2014, Design of Concrete Structures, A23.3-14, 6th Edition, Rexdale, Ontario, CanadaGoogle Search
9 
Chae H. S., Kim B. H., Yun Y. M., 2011, Indeterminate Strut-Tie Model and Load Distribution Ratio of Continuous RC Deep Beams – (II) Validity Evaluation, Journal of Korean Concrete Institute KCI, Vol. 23, pp. 13-22DOI
10 
Clarke J. L., 1973, Behavior and Design of Pile Caps with Four Piles, Report No. 42.489, Cement and Concrete Association, London, UKGoogle Search
11 
Comite Euro-International du Beton , 2010, CEP-FIP Model Code 2010, International Federation for Structural Concrete (fib), Lausanne, SwitzerlandGoogle Search
12 
European Committee for Standardization , 2004, Eurocode 2: Design of Concrete Structures, Brussels, BelgiumGoogle Search
13 
Ha T. H., Hong S. G., 2005, Effect of Diagonal Cracking on the Strength of Concrete Strut in RC Members, KCI Spring Conference, pp. 383-386Google Search
14 
Kim B. H., Chae H. S., Yun Y. M., 2011, Indeterminate Strut-Tie Model and Load Distribution Ratio of Continuous RC Deep Beams – (I) Proposal of Model & Load Distribution Ratio, Journal of Korean Concrete Institute KCI, Vol. 23, pp. 3-12Google Search
15 
Kim B. H., Chae H. S., Yun Y. M., 2013, Refined 3-Dimensional Strut-Tie Models for Analysis and Design of Reinforced Concrete Pile Caps, Journal of the Korean Society of Civil Engineers, Vol. 33, No. 1, pp. 1-16DOI
16 
MacGregor J. G., 1988, Reinforced Concrete - Mechanics and Design, Prentice Hall, Englewood Cliffs, New Jersey, USAGoogle Search
17 
MacGregor J. G., 1997, Reinforced Concrete - Mechanics and Design, 4th Edition, Prentice Hall, Englewood Cliffs, New Jersey, USAGoogle Search
18 
Marti P., 1985, Basic Tools of Reinforced Concrete Beam Design, Journal of American Concrete Institute, Vol. 82, No. 1, pp. 46-56Google Search
19 
Nielsen M. P., Braestrup M. W., Jensen B. C., Bach F., 1978, Concrete Plasticity, Beam Shear - Shear in Joints - Punching Shear, Special Publication, Danish Society for Structural Science and Engineering, Lyngby, DenmarkGoogle Search
20 
Portland Cement Association , 2004, AASHTO LRFD Strut-Tie Model Design Examples, Skokie, Illinois, USAGoogle Search
21 
Ramirez J. A., Breen J. E., 1983, Proposed Design Procedure for Shear and Torsion in Reinforced and Prestressed Concrete, Research Report 248-4F, Center for Transportation Research, University of Texas at Austin, Texas, USAGoogle Search
22 
Sabnis G. M., Gogate A. B., 1984, Investigation of Thick Slab (Pile Cap) Behavior, Proc., ACI Journal, Farmington Hills, Michigan, Vol. 81, pp. 35-39Google Search
23 
Schlaich J., Schaefer K., Jennewein M., 1987, Towards a Consistent Design of Structural Concrete, Journal of the Prestressed Concrete Institute, Vol. 32, No. 3, pp. 74-151DOI
24 
Suzuki K., Otsuki K., 2002, Experimental Study on Corner Shear Failure of Pile Caps, Transactions of the Japan Concrete Institute, Vol. 23, pp. 303-310Google Search
25 
Suzuki K., Otsuki K., Tsubata T., 1998, Influence of Bar Arrangement on Ultimate Strength of Four-Pile Caps, Transactions of the Japan Concrete Institute, Vol. 20, pp. 195-202Google Search
26 
Suzuki K., Otsuki K., Tsubata T., 1999, Experimental Study on Four-pile Caps with Taper, Transactions of the Japan Concrete Institute, Vol. 21, pp. 361-368Google Search
27 
Suzuki K., Otsuki K., Tsuchiya T., 2000, Influence of Edge Distance on Failure Mechanism of Pile Caps, Transactions of the Japan Concrete Institute, Vol. 22, pp. 361-368Google Search
28 
Thurlimann B., 1976, Shear Strength of Reinforced and Prestressed Concrete - CEB Approach, Special Publication 59-6, American Concrete Institute, Detroit, USAGoogle Search
29 
Vecchio F. J., Collins M. P., 1982, The Response of Reinforced Concrete to In-plane Shear and Normal Stresses, Publication No. 82-03, Department of Civil Engineering, University of Toronto, CanadaGoogle Search
30 
Willam K. J., Warnke E. P., 1975, Constitutive Model for the Triaxial Behavior of Concrete, IABSE Proceedings, Vol. 19, pp. 1-30DOI
31 
Yun Y. M., Ramirez J. A., 2016, Strength of Concrete Struts in Three-dimensional Strut-Tie Models, Journal of Structural Engineering, ASCE, Vol. 142, No. 11DOI