ASCE, 2005, Seismic Design Criteria for Structures, Systems, and Components in Nuclear Facilities (ASCE/SEI 43-05), Reston, VA; American Society of Civil Engineers (ASCE)

ASCE, 1982, State-of-the-Art Report on Finite Element Analysis of Reinforced Concrete, Reston, VA; Task Committee on Finite Element Analysis of Reinforced Concrete Structures, American Society of Civil Engineers (ASCE)

Belarbi A., Hsu T. T. C., 1994, Constitutive Laws of Concrete in Tension and Reinforcing Bars Stiffened by Concrete, ACI Structural Journal, Vol. 91, No. 4, pp. 465-474

Comite Euro-International Du Beton, 1996, RC Elements under Cyclic Loading: State of the Art Report (CEB 1996), London, UK; Thoms Telford Services Ltd

Comite Euro-International Du Beton, 1996, RC Frames under Earthquake Loading: State of the Art Report (CEB 1996), London, UK; Thoms Telford Services Ltd

Chopra A. K., 1995, Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice-Hall, Inc

Cheon J. H., Seong D. J., Cho H. J., Cho J. Y., Shin H. M., 2015, Nonlinear Finite Element Analysis of the Reinforced Concrete Panel Using High-Strength Reinforcing Bar, Journal of the Korea Concrete Institute, Vol. 27, No. 5, pp. 481-488

Hsu L., 1974, Behavior of Multistory Reinforced Concrete Shear Walls during Earthquakes, Ph.D. Thesis. Univ. of Illinois at Urbana-Champaign, Urbana, Illinois

Kim D. Y., Kwak H. G., 2004, Cracking Behavior of RC Shear Walls Subject to Cyclic Loadings, Computers and Concrete, Vol. 1, No. 1, pp. 77-98

Kim T. H., Ra K. W., Lee J. H., Shin H. M., 2016, Nonlinear Seismic Analysis of Hollow Cast-in-place and Precast RC Bridge Columns with Triangular Reinforcement Details, Journal of the Korea Concrete Institute, Vol. 28, No. 6, pp. 713-722

KCI, , Concrete Design Code and Commentary, Seoul, Korea; Korea Concrete Institute (KCI). (In Korean)

Kupfer H. B., Gerstle K. H., 1973, Behavior of Concrete under Biaxial Stresses, Journal of the Engineering Mechanics Division ASCE, Vol. 99, No. 4, pp. 852-866

Maekawa K., Pimanmas A., Okamura H., 2003, Nonlinear Mechanics of Reinforced Concrete, Spon Press

Menegotto M., Pinto P. E., 1973, Method of Analysis for Cyclically Loaded Reinforced Concrete Plane Frames Including Changes in Geometry and Nonelastic Behavior of Elements Under Combined Normal Force and Bending, In Proceedings of IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Lisbon, Spain

Committee on the Safety of Nuclear Installations, 1996, Seismic Shear Wall ISP NUPEC’s Seismic Ultimate Dynamic Response Test: Comparison Report (OCDE/GD(96)188), Paris, France; Organization for Economic Co-operation and Development (OECD).NEA/CSNI/R(96)10

Oesterle R. G., Fiorato A. E., Johal L. S., Carpenter J. E., Russel H. G., Corley W. G., 1975, Earthquake Resistant Structural Walls-Tests of Isolated Walls, Report to National Science Foundation, Construction Technology Lab., Portland Cement Association, Skokie, Illinois

Thorenfeldt E., Tomaszewicz A., Jensen J. J., 1987, Mechanical Properties of High-Strength Concrete and Application in Design, In Proceedings of Symposium on Utilization of High-Strength Concrete, Stavanger, Norway, pp. 149-159

Vecchio F. J., Collins M. P., 1993, Compression Response of Cracked Reinforced Concrete, Journal of Structural Engineering ASCE, Vol. 119, No. 12, pp. 3590-3610

NRC, 2007, Damping Values for Seismic Design of Nuclear Power Plants (Regulatory Guide 1.61. Rev. 1), Washington, DC; U.S. Nuclear Regulatory Commission (NRC)