Mobile QR Code QR CODE
Export citation EndNote

References

1 
AASHTO LRFD Bridge Design Specifications. 8th Edition, Washington, DC; American Association of State Highway and Transportation Officials (AASHTO).Google Search
2 
ACI Committee 318 (2019) Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19)., USA, Michigan; Farmington Hills, MI; American Concrete Institute (ACI).Google Search
3 
ACI-ASCE Committee 445 (2010) Further Examples for the Design of Structural Concrete with Strut-and-Tie Models (SP-273)., Farmington Hills, MI; American Concrete Institute (ACI).Google Search
4 
Aguilar G., Matamoros A. B., Parra-Montesinos G. J., Ramirez J. A., Wight J. K., 2002, Experimental Evaluation of Design Procedures for Shear Strength of Deep Reinforced Concrete Beams, ACI Structural Journal, Vol. 99, No. 4, pp. 539-548Google Search
5 
Ahmad S., Shah A., Zaman A., Salimullah K., 2011, Design and Evaluation of the Shear Strength of Deep Beams by Strut and Tie Model (STM, Transactions of Civil and Environmental Engineering, Vol. ijst, No. 35(c1, pp. 1-13Google Search
6 
Anderson N. S., Ramirez J. A., 1989, Detailing of Stirrup Reinforcement, ACI Structural Journal, Vol. 86, No. 5, pp. 507-515Google Search
7 
Arabzadeh A., Aghayari R., Rahai A. R., 2011, Investigation of Experimental and Analytical Shear Strength of Reinforced Concrete Deep Beams, International Journal of Civil Engineering 9, Vol. 3, pp. 207-214Google Search
8 
Bergmeister K., Breen J. E., Jirsa J. O., 1991, Dimensioning of the Nodes and Development of Reinforcement, In Structural Concrete (IABSE Colloquium Report 62). International Association for Bridge and Structural Engineering (IABSE), Zurich, Switzerland, pp. 551-556Google Search
9 
Bergmeister K., Breen J. E., Jirsa J. O., Kreger M. E., 1993, Detailing in Structural Concrete (Research Rep. 1127-3 F), Center for Transportation Research, Univ. of Texas at Austin, Texas, USA.Google Search
10 
Brena S. F., Roy N. C., 2009, Evaluation of Load Transfer and Strut Strength of Deep Beams with Short Longitudinal Bar Anchorages, ACI Structural Journal, Vol. 106, No. 5, pp. 678-689Google Search
11 
Canadian Standards Association (CSA) , 2014, Design of Concrete Structures (A23.3-14). 6th Edition, Rexdale, Ontario, Canada.Google Search
12 
Chae H. S., 2012, Indeterminate Strut-Tie Models for Reinforced Concrete Deep Beams and Corbels, Ph.D Dissertation, Kyungpook National University, Daegu, Korea, pp. 290Google Search
13 
Chae H. S., Yun Y. M., 2015, Strength of Concrete Struts for Strut-Tie Model Design of Reinforced Concrete Beams with Shear Span to Effective Depth Ratio of Less than 3, 0, Vol. journal of advanced concrete technology, No. 13DOI
14 
Chae H. S., Yun Y. M., 2016, Strut-Tie Models and Load Distribution Ratios for Reinforced Concrete Beams with Shear Span-to-Effective Depth Ratio of Less than 3.0 - (I) Models and Load Distribution Ratios, Journal of Korea Concrete Institute (In Korean), Vol. 28, No. 3, pp. 257-265Google Search
15 
Clark A. P., 1951, Diagonal Tension in Reinforced Concrete Beams, ACI Journal, Proceedings, Vol. 42, No. 2, pp. 145-156Google Search
16 
Collins M. P., Mitchell D., 1991, Prestressed Concrete Structures, Prentice Hall, New Jersey, USAGoogle Search
17 
Comite Euro-International du Beton (CEB) , 2010, CEP-FIP Model Code 2010. International Federation for Structural Concrete (fib), Lausanne, Switzerland; CEB.Google Search
18 
Deutsches Institut für Normung (DIN) , 2008, Concrete, Reinforced and Prestressed Concrete Structures - Part I: Design and Construction (DIN 1045-1 : 2008), Berlin, Germany; German Institute for Standardisation, DIN.Google Search
19 
European Committee for Standardization (CEN) , 2004, Eurocode 2: Design of Concrete Structures., Brussels, Belgium.Google Search
20 
Foster S. J., Gilbert R. I., 1998, Experimental Studies on High-Strength Concrete Deep Beams, ACI Structural Journal, Vol. 95, No. 4, pp. 382-390Google Search
21 
Kim S. C., Park S. Y., 2005, A Study on Shear Steel Effect on RC Deep Beams, Journal of the Korean Society of Civil Engineers, Vol. 25, No. 2a, pp. 364-373Google Search
22 
Kim W., Jeong J., 2011, Decoupling of Arch Action in Shear-Critical Reinforced Concrete Beams, ACI Structural Journal, Vol. 108, No. 4, pp. 395-404Google Search
23 
Lee J. Y., Choi I. J., Kim S. W., 2011, Shear Behavior of Reinforced Concrete Beams with High-Strength Stirrups, ACI Structural Journal, Vol. 108, No. 5, pp. 620-629Google Search
24 
Lu W. Y., Lin I. J Yu H. W., 2013, Shear Strength of Reinforced Concrete Deep Beams, ACI Structural Journal, Vol. 110, No. 4, pp. 671-680Google Search
25 
MacGregor J. G., 1997, Reinforced Concrete - Mechanics and Design. 4th Ed., Prentice Hall, New Jersey, USA.Google Search
26 
Marti P., 1985, Basic Tools of Reinforced Concrete Beam Design, ACI Journal, Proceedings, Vol. 82, No. 1, pp. 46-56Google Search
27 
Mitchell D., Collins D., Bhide S., Rabbat B., 2004, AASHTO LRFD Strut-and-Tie Model Design Examples, Skokie, Illinois, USA; Portland Cement Association (PCA).Google Search
28 
Oh J. K., Shin S. W., 2001, Shear Strength of Reinforced High-Strength Concrete Deep Beams, ACI Structural Journal, Vol. 98, No. 2, pp. 164-173Google Search
29 
Panjehpour M., Chai H. K., Voo Y. L., 2015, Refinement of Strut-and-Tie Model for Reinforced Concrete Deep Beams, PLOS ONE, Vol. 10, No. 6DOI
30 
Roller J. J., Russell H. G., 1990, Shear Strength of High-Strength Concrete Beams with Web Reinforcement, ACI Structural Journal, Vol. 87, No. 2, pp. 191-198Google Search
31 
Salamy M. R., Kobayashi H., Unjoh S., 2005, Experimental and Analytical Study on RC Deep Beams, Asian Journal of Civil Engineering (Building and Housing, Vol. 6, No. 5, pp. 487-499Google Search
32 
Sarsam K. F., Al-musawi J. M. S., 1992, Shear Design of High- and Normal Strength Concrete Beams with Web Reinforcement, ACI Structural Journal, Vol. 89, No. 6, pp. 658-664Google Search
33 
Schlaich J., Schäfer K., Jennewein M., 1987, Towards a Consistent Design of Structural Concrete, PCI Journal, Vol. 32, No. 3, pp. 74-151Google Search
34 
Sherwood E. G., Bentz E. C., Collins M. P., 2007, Effect of Aggregate Size on Beam-Shear Strength of Thick Slabs, ACI Structural Journal, Vol. 104, No. 2, pp. 180-190Google Search
35 
Shin S. W., Lee K. S., Moon J., Ghosh S. K., 1999, Shear Strength of Reinforced High-Strength Concrete Beams with Shear Span-to-Depth Ratios between 1.5 and 2.5, ACI Structural Journal, Vol. 96, No. 4, pp. 549-556Google Search
36 
Smith K. M., Vantsiotis A. S., 1982, Shear Strength of Deep Beams, ACI Material Journal, Vol. 79, No. 3, pp. 201-213Google Search
37 
Tan K. H., Kong F. K., Teng S., Weng L. W., 1997, Effect of Web Reinforcement on High-Strength Concrete Deep Beams, ACI Structural Journal, Vol. 94, No. 6, pp. 572-582Google Search
38 
Tan K. H., Lu H. Y., 1999, Shear Behavior of Large Reinforced Concrete Deep Beams and Code Comparisons, ACI Structural Journal, Vol. 96, No. 5, pp. 836-845Google Search
39 
Tan K. H., Kong F. K., Teng S., Guan L., 1995, High- Strength Concrete Deep Beams With Effective Span and Shear Span Variations, ACI Structural Journal, Vol. 92, No. 4, pp. 572-582Google Search
40 
Tanimura Y., Sato T., 2005, Evaluation of Shear Strength of Deep Beams with Stirrup, Quarterly Report of RTRI, Vol. 46, No. 1, pp. 53-58DOI
41 
Teng S., Kong F. K., Poh S. P., Guan L. W., Tan K. H., 1996, Performance of Strengthened Concrete Deep Beams Pre-damaged in Shear, ACI Structural Journal, Vol. 93, No. 2, pp. 159-171Google Search
42 
Xie Y., Ahmad S. H., Yu T., Hino S., Chung W., 1994, Shear Ductility of Reinforced Concrete Beams of Normal and High-Strength Concrete, ACI Structural Journal, Vol. 91, No. 2, pp. 140-149Google Search
43 
Yang K. H., Chung H. S., Lee E. T., Eun H. C., 2003, Shear Characteristics of High-strength Concrete Deep Beams without Shear Reinforcements, Engineering Structures, Vol. 25, pp. 1343-1352DOI
44 
Yun Y. M., 2006, Strength of Two-dimensional Nodal Zones in Strut-Tie Models, Journal of Structural Engineering, Vol. 132, No. 11, pp. 1764-1783DOI
45 
Yun Y. M., Ramirez J. A., 1996, Strength of Struts and Nodes in Strut-Tie Model, Journal of Structural Engineering, Vol. 122, No. 1, pp. 20-29DOI