Mobile QR Code QR CODE
Export citation EndNote

References

1 
Chen M., Li L., Zheng Y., Zhao P., Lu L., Cheng X., 2018, Rheological and Mechanical Properties of Admixtures Modified 3D Printing Sulphoaluminate Cementitious Materials, Construction and Building Materials, Vol. 189, pp. 601-611DOI
2 
Ding T., Xiao J., Qin F., Duan Z., 2020, Mechanical Behavior of 3D Printed Mortar with Recycled Sand at Early Ages, Construction and Building Materials, Vol. 248DOI
3 
Ghaffar S. H., Corker J., Fan M., 2018, Additive Manufacturing Technology and Its Implementation in Construction as an Eco-innovative Solution, Automation in Construction, Vol. 93, pp. 1-11DOI
4 
Kim B. H., Kim G. S., Jin S. M., Cho S. J., 2019, A Comparative Study on Performance of Deep Learning Models for Vision-based Concrete Crack Detection According to Model Types, The Journal of Korean Society of Safety (In Korean), Vol. 34, No. 6, pp. 50-57DOI
5 
Kim Y. Y., Kong H. J., Victor C. L., 2003, Design of Engineered Cementitious Composite Suitable for Wet-Mixture Shotcreting, ACI Materials Journal, Vol. 100, No. 6, pp. 511-518Google Search
6 
Korea Agency for Technology and Standards (KATS) , 2006, Methods of Testing Cements-Determination of Strength (KS L ISO679), Seoul, Korea: Korea Standard Association (KSA). (In Korean)Google Search
7 
Korea Agency for Technology and Standards (KATS) , 2017, Testing Method for Compressive Strength of Hydraulic Cement Mortars (KS L 5105), Seoul, Korea: Korea Standard Association (KSA). (In Korean)Google Search
8 
Lee B. Y., Han B. C., Cho C. G., Kim Y. Y., 2012, Flexural Performance and Fiber Distribution of an Extruded DFRCC Panel, Computers and Concrete, Vol. 10, No. 2, pp. 105-119DOI
9 
Lee H. J., Kim J. H. J., Moon J. H., Kim W. W., Seo E. A., 2019, Correlation between Pore Characteristics and Tensile Bond Strength of Additive Manufactured Mortar Using X-ray Computed Tomography, Construction and Building Materials, Vol. 226, pp. 712-720DOI
10 
Nerella V. N., Hempel S., Mechtcherine V., 2017, Micro- and Macroscopic Investigations on the Interface between Layers of 3D-Printed Cementitious Elements, In Proceedings of International Conference on Advances in Construction Materials and Systems (ICACMS 2017). Chennai, 3-8. 9.Google Search
11 
Nerella V. N., Hempel S., Mechtcherine V., 2019, Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D-Printing, Construction and Building Materials, Vol. 205, pp. 586-601DOI
12 
Ng P. L., Kwan A. K-H., Li L. G., 2016, Packing and Film Thickness Theories for the Mix Design of High-performance Concrete, Journal of Zhejiang University-SCIENCE A, Vol. 17, No. 10, pp. 759-781Google Search
13 
Sanjayan J. G., Nematollahi B., 2019, Chapter 1 -3D Concrete Printing for Construction Applications, In Sanjayan, J. G., Nazari, A., Nematollahi, B. (Eds.) 3D Printing Technology. Kidlington, UK; Butterworth-Heinemann, pp. 1-11DOI
14 
Seo J. S., Lee B. C., Kim Y. Y., 2019, The Effects of Void Ratio on Extrudability and Buildability of Cement-based Composites Produced by 3D Printers, Journal of the Korea Institute for Structural Maintenance and Inspection (In Korean), Vol. 23, No. 7, pp. 104-112DOI
15 
Song H., Shin H. W., 2018, High Temperature Properties of Cement Mortar Using EVA, EVCL Redispersible Polymer Powder and Fly Ash, Journal of the Korean Recycled Construction Resources Institute (In Korean), Vol. 6, No. 4, pp. 365-372DOI
16 
Sun X., Wang Q., Wang H., Chen L., 2020, Influence of Multi-walled Nanotubes on the Fresh and Hardened Properties of a 3D Printing PVA Mortar Ink, Construction and Building Materials, Vol. 247DOI
17 
Tay Y. W. D., Qian Y., Tan M. J., 2019, Printability Region for 3D Concrete Printing Using Slump and Slump Flow Test, Composites Part B: Engineering, Vol. 174DOI
18 
Yuan Q., Li Z., Zhou D., Huang T., Huang G., Jiao D., Shi C., 2019, A Feasible Method for Measuring the Buildability of fresh 3D Printing Mortar, Construction and Building Materials, Vol. 227DOI