JKCI - Journal of the Korea Concrete Institute

1

ACI Committee 318 , 2019, Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary., Farmington Hills, MI; American Concrete Institute (ACI). 519.

2

CEN , 2004, Eurocode 2: Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildingsn (BS EN 1992-1-1:2004), London, UK European Committee for Standardization (CEN), British Standards Institute (BSI), 211.

3

Collins M. P., Mitchell D., 1991, Prestressed Concrete Structures, Prentice-Hall, Englewood Cliffs, N. J., 766.

4

Collins M. P., Walsh P. F., Archer F. E., Hall A. S., 1968, Ultimate Strength of Reinforced Concrete Beams Subjected to Combined Torsion and Bending, ACI Symposium Paper, Vol. 18, pp. 379-402

5

CSA Committee A23.3-14 , 2014, Design of Concrete Structures for Buildings (CAV3-A23.3-14), Canadian Standards Association (CSA), Toronto, ON, Canada, 291.

6

Ersoy U., Ferguson P. M., 1968, Concrete Beams Subjected to Combined Torsion and Shear-Experimental Trends, ACI Symposium Paper, Vol. 18, pp. 441-460

7

Fang I. K., Shiau J. K., 2004, Torsional Behavior of Normal- and High-Strength Concrete Beams, ACI Structural Journal, Vol. 101, No. 3, pp. 304-313

8

Gesund H., Schuette F. J., Buchanan G. R., Gray G. A., 1964, Ultimate Strength in Combined Bending and Torsion of Concrete Beams Containing both Longitudinal and Transverse Reinforcement, ACI Journal Proceedings, Vol. 61, No. 12, pp. 1509-1522

9

Hsu T. T. C., 1984, Torsion of Reinforced Concrete, Van Nostrand Reinhold, Inc. New York, 515.

10

Hsu T. T. C., Mo Y. L., 2010, Unified Theory of Concrete Structures, Singapore, John Wiley & Sons, Ltd,500

11

JSCE , 2007, Standard Specifications for Concrete Structures, Japan Society of Civil Engineering (JSCE),Japan, 469

12

Karlsruhe J. E., Grasser E., Hilsdorf H. K., Kersken-Bradley M., Konig G., Kupfer H., Litzner H.-U., Quast U., Wolfel E., 1994, Concrete Structures Euro-Design-Handbook1994/96., Edited by Josef Eibl Karlsruhe, Ernst & Sohn, Berlin, Germany, 764.

13

KCI , 2012, Concrete Design Code and Commentary, Seoul, Korea; Kimoondang Publishing Company. Korea Concrete Institute (KCI). (In Korean)

14

KCI , 2016, KCI Practical Design Guidelines: Comparisons of Shear Design Methods and Shear Strength Models of RC Beams, KCI PM103, korean concrete institute (kci), pp. 1-16

15

KCI , 2021, Concrete Design Code and Commentary, Seoul, Korea; Kimoondang Publishing Company. Korea Concrete Institute (KCI),22-20(In Korean)

16

KIBSE , 2015, Korea Highway Bridge Design Code-Limit State Design Method (KBDC-LSD) and Commentary, Seoul, Korea; Gunsulbook Publishing Company. Korea Institute of Bridge and Structural Engineers (KIBSE), Korea Bridge Design and Engineering Research Center (KBDERC). (In Korean)

17

Koutchoukali N. E., Belarbi A, 2001, Torsion of High- Strength Reinforced Concrete Beams and Minimum Reinforcement, Structural Journal, Vol. 98, No. 4, pp. 462-469

18

Lee J. Y., Kim S. W., 2010, Torsional Strength of RC Beams Considering Tension Stiffening Effect, Journal of Structural Engineering, Vol. 136, No. 11, pp. 1367-1378

19

Lee J. Y., Choi I. J., Kim S. W., 2011, Shear Behavior of Reinforced Concrete Beams with High-Strength Stirrups, ACI Structural Journal, Vol. 108, No. 5, pp. 620-629

20

Lee J. Y., Kim K. H., Shin D. I., 2021, Maximum Torsional Strength of Reinforced Concrete Beams (I) Maximum Torsional Reinforcement Ratio, ournal of the Korea Concrete Institute (In Korean), Vol. 33, No. 5, pp. 519-530

21

Lee J.-Y., 2018, Evaluation of Maximum Shear Reinforcement Ratio of Reinforced Concrete Beams Based on Truss Model, Journal of the Korea Concrete Institute (In Korean), Vol. 30, No. 2, pp. 217-227

22

Lee J.-Y., Hwang H. B., 2010, Maximum Shear Reinforcement of Reinforced Concrete Beams, ACI Structural Journal, Vol. 107, No. 5, pp. 580-588

23

MacGregor J. G., Ghoneim M. G., 1995, Design for Torsion, ACI Structural Journal, Vol. 92, No. 2, pp. 211-218

24

McMullen A. E., Rangan B. V., 1978, Pure Tension in Rectangular Sections-A Re-Examination, ACI Journal Proceedings, Vol. 75, No. 10, pp. 511-519

25

McMullen A. E., Warwaruk J., 1967, The Torsional Strength of Rectangular Reinforced Concrete Beams Subjected to Combined Loading, Report No 2, University of Alberta, Edmonton, 162.

26

Rasmussen L. J., Baker G., 1995, Torsion in Reinforced Normal and High-Strength Concrete Beams Part 1: Experimental Test Series, ACI Structural Journal, Vol. 92, No. 1, pp. 56-62

JKCIJournal of
the Korea Concrete Institute

Journal of the Korea Concrete Institute

ISO Journal TitleJ Korea Concr Inst.

Journal Search

Journal XML

References

JKCIJournal ofthe Korea Concrete Institute