JKCI - Journal of the Korea Concrete Institute

1

ACI Committee 318 , 2019, Building Code Requirements for Structural Concrete (ACI 318R-19), Farmington Hills, MI; American Concrete Institute (ACI). 519.

2

ACI Subcommittee 445 , 2002, Examples for the Design of Structural Concrete with Strut-and-Tie Models (ACI SP-208), Farmington Hills, MI; American Concrete Institute (ACI). 242.

3

CEN , 2004, Eurocode 2: Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings (BS EN 1992- 1-1:2004), London, UK; European Committee for Standardization (CEN), British Standards Institute (BSI).

4

Chae H.-S., Yun Y. M., 2016a, Strut-Tie Models and Load Distribution Ratios for Reinforced Concrete Beams with Shear Span-to-Effective Depth Ratio of Less than 3 (I) Models and Load Distribution Ratios, Journal of the Korea Concrete Institute, Vol. 28, No. 3, pp. 257-266

5

Chae H.-S., Yun Y. M., 2016b, Strut-Tie Models and Load Distribution Ratios for Reinforced Concrete Beams with Shear Span-to-Effective Depth Ratio of Less than 3 (II) Validity Evaluation, Journal of the Korea Concrete Institute, Vol. 28, No. 3, pp. 267-278

6

Collins M. P., Mitchell D., 1986, Rational Approach to Shear Design-The 1984 Canadian Code Provisions, ACI Journal Proceedings, Vol. 83, No. 6, pp. 925-933

7

Crist R. A., 1966, Shear Behavior of Deep Reinforced Concrete Beams, Proceedings of the RILEM Symposium on the Effects of Repeated Loading on Materials and Structural Elements, Mexico, 1966. 31.

8

fib , 1991, Evaluation of the Time Dependent Behaviour of Concrete (Bulletin d’Information No. 199), Lausanne, Switzerland; Comite European du Béton (CEB)/International Federation for Structural Concrete (fib). 201.

9

Foster S. J., Gilbert R. I., 1998, Experimental Studies on High-Strength Concrete Deep Beams, ACI Structural Journal, Vol. 95, No. 4, pp. 382-390

10

Grob J., Thürlimann B., 1976, Ultimate Strength and Design of Reinforced Concrete Beams Under Bending and Shear, Springer, pp. 107-120

11

Hwang S. J., Lu W. Y., Lee H.-J., 2000, Shear Strength Prediction for Deep Beams, ACI Structural Journal, Vol. 97, No. 3, pp. 367-376

12

KCI , 2017, Concrete Design Code and Commentary, Seoul, Korea; Kimoondang Publishing Company. Korea Concrete Institute (KCI). 637. (In Korean)

13

KCI Shear and Torsion Committee , 2012, Examples for the Concrete Structural Members with Strut-Tie Models (KCI-M-06- 001), 2nd Edition, Seoul, Korea; Kimoondang Publishing Company. Korea Concrete Institute (KCI). 266. (In Korean)

14

Lee J.-Y., 2022, Practical Design Method of Reinforced Concrete Deep Beams (II) Improved Design Method, Journal of the Korea Concrete Institute 34(5), In Press. (In Korean)

15

Lee J.-Y., Kang Y.-M., 2021, Strut-and-Tie Model without Discontinuity for RC Deep Beams, ACI Structural Journal, Vol. 118, No. 5, pp. 123-134

16

Leonhardt F., Walther R., 1964, The Stuttgart Shear Tests, 1961: Contributions to the Treatment of the Problems of Shear in Reinforced Concrete Construction, Cement and Concrete Association 111, pp. 49-54

17

Marti P., 1985, Basic Tools of Reinforced Concrete Beam Design, ACI Journal Proceedings, Vol. 82, No. 1, pp. 46-56

18

Matamoros A. B., Wong K. H., 2003, Design of Simply Supported Deep Beams Using Strut-and-Tie Models, ACI Structural Journal, Vol. 100, No. 6, pp. 704-712

19

Mau S. T., Hsu T. T. C., 1989, Formula for the Shear Strength of Deep Beams, ACI Structural Journal, Vol. 86, No. 5, pp. 516-523

20

MOLIT , 2021, Strut-and-Tie Model for Concrete Structures (KDS 14 20 24: 2021), Sejong, Korea: Ministry of Land, Infrastructure and Transport (MOLIT). (In Korean)

21

Morsch E., 1902, Der Eisenbetonbau, Seine Anwendung und Theorie, 1st Edition. Im Selbstverlag der Firma. Neustadt. 118.

22

Nielsen M. P., Braestrup M. W., Jensen B. C., Bach F., 1978, Concrete Plasticity: Beam Shear, Punching Shear Shear, in Joints, Danish Society for Structural Science and Engineering, Vol. 129

23

Paiva H. A., Siess C. P., 1965, Strength and Behavior of Deep Beams in Shear, Proceedings of ASCE, Vol. 91, No. 5, pp. 19-41

24

Ritter W., 1899, Die Bauweise Hennebique, Schweizerische Bauzeitung, Vol. 33, No. 7, pp. 59-61

25

Rogowsky D. M., MacGregor J. G., 1986, Design of Reinforced Concrete Deep Beams, Concrete International: Design and Construction, Vol. 8, No. 8, pp. 46-58

26

Schlaich J., Schäfer K., 1984, Konstrulerenim Stahlbeton-bau. Beton-Kalender, Wilhelm Ernst und Sohn, Berlin, pp. 87-1004

27

Schlaich J., Schäfer K., Jennewein M., 1987, Towards a Consistent Design of Structural Concrete, PCI Journal, Vol. 32, No. 3, pp. 74-150

28

Tan K. H., 2001, Direct Strut-and-Tie Model for Prestressed Deep Beams, Journal of Structural Engineering ASCE, Vol. 27, No. 9, pp. 1076-1084

29

Tan K. H., 2003, A Direct Method for Deep Beams with Web Reinforcement, Magazine of Concrete Research, Vol. 55, No. 1, pp. 53-63

30

Tan K. H., Kong F. K., Teng S., 1997, Effect of Web Reinforcement on High-Strength Concrete Deep Beams, ACI Structural Journal, Vol. 94, No. 5, pp. 572-582

31

Yang K. H., Ashour A. F., 2011, Strut-and-Tie Model Based on Crack Band Theory for Deep Beams, Journal of Structural Engineering ASCE, Vol. 137, No. 10, pp. 1030-1038

32

Yun Y. M., 2020, Numerical Method for Effective Strength of Nodal Zones in Two-Dimensional Strut-and-Tie Models, Journal of the Korea Concrete Institute, Vol. 32, No. 4, pp. 359-369

33

Zhang N., Tan K. H., 2007, Direct Strut-and-Tie Model for Single Span and Continuous Deep Beams, Engineering Structures, Vol. 29, No. 11, pp. 2987-3001

JKCIJournal of
the Korea Concrete Institute

Journal of the Korea Concrete Institute

ISO Journal TitleJ Korea Concr Inst.

Journal Search

Journal XML

References

JKCIJournal ofthe Korea Concrete Institute