Mobile QR Code QR CODE
Export citation EndNote

References

1 
ACI Committe 548 (1988) Guide for Mixing and Placing Sulfur Concrete in Construction. ACI Materials Journal 85(4), 314- 325.URL
2 
Alhozaimy, A. M., Soroushian, P., and Mirza, F. (1996) Mechanical Properties of Polypropylene Fiber Reinforced Concrete and the Effects of Pozzolanic Materials. Cement and Concrete Composites 18(2), 85-92.DOI
3 
ASTM C191 (2008) Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle. West Conshohocken, PA; ASTM International.URL
4 
Bae, S. G., Gwon, S. W., Kim, S. W., and Cha, S. W. (2014) Physical Properties of Sulfur Concrete with Modified Sulfur Binder. Journal of the Korean Society of Civil Engineers 34 (3), 763-771. (In Korean)DOI
5 
Bae, S. H. (1992) Characteristics of Sulfur Mortar and Concrete. Magazine of the Korea Concrete Institute 4(1), 58-61. (In Korean)URL
6 
Cao, M., Xie, C., Li, L., and Khan, M. (2018) The Relationship between Reinforcing Index and Flexural Parameters of New Hybrid Fiber Reinforced Slab. Computers and Concrete, An International Journal 22(5), 481-492.URL
7 
Cha, S. W., Kim, K. S., and Park, H. S. (2011) Manufacture of Modified Sulfur Polymer Binder and Characteristics of Sulfur Concrete. Magazine of the Korea Concrete Institute 23(6), 40-42. (In Korean)URL
8 
Chen, Z., Wang, Y., Liao, S., and Huang, Y. (2020) Grinding Kinetics of Waste Glass Powder and Its Composite Effect as Pozzolanic Admixture in Cement Concrete. Construction and Building Materials 239, 117876.DOI
9 
Choe, M. S. (2012) Modified Sulfur Binder and the Fabrication Method thereof, Hydraulic Modified Sulfur Material Composition and the Fabrication Method thereof or Combustible Modified Sulfur Material Composition and the Fabrication Method thereof Containing the Modified Sulfur Binder (U.S. Patent No. 8, 207, 249). Washington, DC: U.S. Patent and Trademark Office.URL
10 
Duecker, W. W. (1934) Admixtures Improve Properties of Sulfur Cements. Chemical and Metallurgical Engineering 41(11), 583-586.URL
11 
Eren, F., Gödek, E., Keskinates, M., Tosun-Felekoğlu, K., and Felekoğlu, B. (2017) Effects of Latex Modification on Fresh State Consistency, Short Term Strength and Long Term Transport Properties of Cement Mortars. Construction and Building Materials 133, 226-233.DOI
12 
Ghasemi, Y., Emborg, M., and Cwirzen, A. (2019) Exploring the Relation between the Flow of Mortar and Specific Surface Area of Its Constituents. Construction and Building Materials 211, 492-501.DOI
13 
KATS (2017a) Flow Table for Use in Tests of Hydraulic Cement (KS L 5111). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)URL
14 
KATS (2017b) Polymer Modified Cement Mortar for Maintenance in Concrete Structure (KS F 4042). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)URL
15 
Khan, M., Cao, M., Chaopeng, X., and Ali, M. (2022) Experimental and Analytical Study of Hybrid Fiber Reinforced Concrete Prepared with Basalt Fiber Under High Temperature. Fire and Materials 46(1), 205-226.DOI
16 
Kim, K. H., Shin, D. C., Jung, H. J., Lee, J. N., and Kim, B. K. (2011) The Quality Properties of Mortar for Using Hydraulic Modification Sulfur as Admixture for Cement. Journal of Korean Recycled Construction Resources Institute 6(2), 81- 88. (In Korean)URL
17 
Kobbe, W. H. (1924) New Uses for Sulfur in Industry. Industrial and Engineering Chemistry 16(10), 1026-1028.DOI
18 
Konsta-Gdoutos, M. S., Metaxa, Z. S., and Shah, S. P. (2010) Highly Dispersed Carbon Nanotube Reinforced Cement Based Materials. Cement and Concrete Research 40(7), 1052-1059.DOI
19 
Li, L., Khan, M., Bai, C., and Shi, K. (2021) Uniaxial Tensile Behavior, Flexural Properties, Empirical Calculation and Microstructure of Multi-Scale Fiber Reinforced Cement- Based Material at Elevated Temperature. Materials 14(8), 1827.DOI
20 
Ohama, Y. (1998) Polymer-Based Admixtures. Cement and Concrete Composites 20(2-3), 189-212.URL
21 
Rossen, J. E., Lothenbach, B., and Scrivener, K. L. (2015) Composition of C-S-H in Pastes with Increasing Levels of Silica Fume Addition. Cement and Concrete Research 75, 14-22.DOI
22 
Scrivener, K. L. (2004) Backscattered Electron Imaging of Cementitious Microstructures: Understanding and Quantification. Cement and Concrete Composites 26(8), 935-945.URL
23 
Sheen, D. H., Kang, S. H., Roh, J. H., and Ryu, Y. S. (2002) Properties and Usages of Sulfur Concrete as Construction Material. Korean Society of Civil Engineers Magazine 50(6), 39-45. (In Korean)URL
24 
Su, Z., Sujata, K., Bijen, J. M., Jennings, H. M., and Fraaij, A. L. A. (1996) The Evolution of The Microstructure in Styrene Acrylate Polymer-Modified Cement Pastes at the Early Stage of Cement Hydration. Advanced Cement Based Materials 3 (3-4), 87-93.DOI
25 
Xie, C., Cao, M., Si, W., and Khan, M. (2020) Experimental Evaluation on Fiber Distribution Characteristics and Mechanical Properties of Calcium Carbonate Whisker Modified Hybrid Fibers Reinforced Cementitious Composites. Construction and Building Materials 265, 120292.DOI
26 
Yoon, J. H. (2004) An Experimental Study on the Manufacturing of Sulfur Concrete. Journal of the Architectural Institute of Korea Structure and Construction 20(9), 143-148. (In Korean)URL
27 
Yoon, J. H. (2005) An Experimental Study on Physical Properties of Sulfur Concrete. Journal of the Architectural Institute of Korea Structure and Construction 21(11), 143-150. (In Korean)URL
28 
Yoon, J. H. (2006) An Experimental Study on Durability of Sulfur Concrete. Journal of the Architectural Institute of Korea Structure and Construction 22(6), 95-102. (In Korean)URL
29 
Yoon, J. H., and Heo, H. S. (2003) An Experimental Study on the Manufacturing of Sulfur Mortar. Journal of the Architectural Institute of Korea Structure and Construction 19(11), 93-99. (In Korean)URL