Mobile QR Code QR CODE
Export citation EndNote

References

1 
Abrams, D. P., and Shah, N. (1992) Cyclic Loading Tests of Unreinforced Masonry Walls. Advanced Construction Technology Center Rep. No. 92-26-10, College of Engineering, University of Illinois at Urbana-Champaign, Urbana, IL.URL
2 
ASCE (2013) Seismic Evaluation and Retrofit of Existing Buildings (ASCE/SEI 41-13). Reston, VA: American Society of Civil Engineers (ASCE).URL
3 
ASCE (2017) Seismic Evaluation and Retrofit of Existing Buildings (ASCE/SEI 41-17). Reston, VA: American Society of Civil Engineers (ASCE).URL
4 
ASTM C 1314-12 (2012) Standard Test Method for Compressive Strength of Masonry Prisms. West Conshohocken, PA: ASTM International.URL
5 
BSI (2002) BS EN 1052-3 Methods of Test for Masonry-Part 3: Determination of Initial Shear Strength. London, UK: British Standards Institute (BSI).URL
6 
Costley, A. C., and Abrams, D. P. (1996) Dynamic Resoponse of Unreinforced Masonry Buildings with Flexible Diaphragms (NCEER-96-0001). Buffalo, New York: National Center for Earthquake Engineering Reseach (NCEER).URL
7 
Eom, T. S., Kim, J., Kim, S. W., Kim, J. H., Han, J. Y., and Choi, H. (2023) Rocking Behavior of Unreinforced Masonry Walls Under Cyclic Load. EESK Journal of Earthquake Engineering 27(1), 2023. (In Korean)DOI
8 
Esposito, R., and Ravenshorst, G. (2017) Quasi-Static Cyclic In- Plane Tests on Masonry Components. Delft University of Technology.URL
9 
JSCE (1999) Test Method for Tensile Properties of Continuous Fiber Reinforcing Materials (JSCE-E-531). Tokyo, Japan: Japan Society of Civil Engineers (JSCE).URL
10 
Kang, S. H., Hong, S. G., and Lee, S. J. (2010) Rocking Capacity of Unreinforced Masonry Walls. Journal of Architectural Institute of Korea-Structural 26(12), 45-56. (In Korean)URL
11 
Kanno, R., and Choi, H. (2021) A Study on Seismic Performance Evaluation of Masonry Walls: Part 1. In-plane Static Cyclic Loading Test with the Presence or Absence of an Opening. Proceedings of AIJ 2021 Conference. Architectural Institute of Japan (AIJ). 781-782. (In Japanese)URL
12 
KATS (2017) Standard Test Method for Compressive Strength of Concrete (KS F 2405). Seoul, Korea: Korea Agency for Technology and Standards (KATS), Korea Standard Association (KSA). (In Korean)URL
13 
KATS (2018) Concrete Bricks (KS F 4004). Seoul, Korea: Korea Standard Association (KSA), Korea Agency for Technology and Standards (KATS). (In Korean)URL
14 
Kim, C. H., Lee, S. J., Heo, S. J., and Eom, T. S. (2022) Investigation of Seismic Performance of RC Wall-Slab Frames with Masonry Infill. EESK Journal of Earthquake Engineering 26(3), 137-147. (In Korean)DOI
15 
KISC (2013) Guidelines for Seismic Performance Evaluation for Existing Buildings. Korea Infrastructure Safety Corporation (KISC). (In Korean)URL
16 
Lee, S. J., Eom, T. S., and Yu, E. J. (2021) Investigation of Diagonal Strut Actions in Masonry-Infilled Reinforced Concrete Frames. International Journal of Concrete Structures and Materials 15(1), 6.DOI
17 
Mahmoudimotlagh, S. (2020) Numerical Modeling of the In-Plane Seismic Behavior of Unreinforced Masonry Wall Retrofitted with Bed Joint Reinforcements. MS Thesis. Delft University of Technology.URL
18 
Moon, F. L., Yi, T., Leon, R. T., and Kahn, L. F. (2007) Testing of a Full-Scale Unreinforced Masonry Building Following Seismic Strengthening. Journal of Structural Engineering 133(9), 1215-1226.DOI
19 
Moon, K. L. (2004) Seismic Strenthening of Low-Rise Unreinforced Masonry Structures with Flexible Diaphragms. Ph.D. Dissertation. Georgia Institute of Technology, Atlanta.URL
20 
Shabani, A., and Kioumarsi, M. (2022) A Novel Macroelement for Seismic Analysis of Unreinforced Masonry Buildings Based on MVLEM in OpenSees. Journal of Building Engineering 49, 104019.DOI
21 
Yi, W. H., Lee, J. H., Oh, S. H., Yang, W. J., and Kang, D. E. (2005) A Study of Evaluation of Shear Capacity of Unreinforced Masonry Wall. Journal of Architectural Institute of Korea-Structural 21(10), 3-10. (In Korean)URL