Mobile QR Code QR CODE
Export citation EndNote

References

1 
ACI Committee 213 (2014) Guide for Structural Lightweight- Aggregate Concrete (ACI 213R-14). Farmington Hills, MI: American Concrete Institute (ACI).URL
2 
ACI Committee 318 (2019) Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318 R-19). Farmington Hills, MI: American Concrete Institute (ACI).URL
3 
ASCE (2007) Seismic Evaluation and Retrofit of Existing Buildings (ASCE/SEI 41-06). Reston, VA: American Society of Civil Engineers (ASCE).URL
4 
Beyer, K., Dazio, A., and Priestley, M. J. N. (2011) Shear Deformations of Slender Reinforced Concrete Walls under Seismic Loading. ACI Structural Journal 108(2), 167-177.DOI
5 
Bohl, A. G. (2006) Plastic Hinge Length in High-Rise Concrete Shear Walls. Master’s Thesis. University of British Columbia.DOI
6 
Bohl, A., and Adebar, P. (2011) Plastic Hinge Lengths in High- Rise Concrete Shear Walls. ACI Structural Journal 108(2), 148-157.URL
7 
CEN (2005) Eurocode 8: Design of Structures for Earthquake Resistance-Part 3: Assessment and Retrofitting of Buildings EN 1998-3:2005). London, UK: European Committee for Standardization (CEN), British Standards Institute (BSI).URL
8 
Chun, Y. S. (2015) Seismic Performance of Special Shear Wall with the Different Hoop Reinforcement Detail and Spacing in the Boundary Element. LHI Journal of Land, Housing, and Urban Affairs 6(1), 11-19.DOI
9 
Constantin, R., and Beyer, K. (2016) Behaviour of U-shaped RC Walls under Quasi-Static Cyclic Diagonal Loading. Engineering Structures 106, 36-52.DOI
10 
Hoult, R. (2022) Universal Plastic Hinge Length for Reinforced Concrete Walls. ACI Structural Journal 119(4), 75-83.URL
11 
Hoult, R. D., Goldsworthy, H. M., and Lumantarna, E. (2018) Plastic Hinge Analysis for Lightly Reinforced and Unconfined Concrete Structural Walls. Bulletin of Earthquake Engineering 16(10), 4825-4860.DOI
12 
Kazaz, İ. (2013) Analytical Study on Plastic Hinge Length of Structural Walls. Journal of Structural Engineering, ASCE 139(11), 1938-1950.DOI
13 
Mun, J. H. (2014) Flexure and Shear Design Approach of Heavy- Weight Concrete Shear Walls. Ph.D. Thesis. Kyonggi University.URL
14 
Mun, J. H., and Yang, K. H. (2015) Plastic Hinge Length of Reinforced Concrete Slender Shear Walls. Magazine of Concrete Research 67(8), 414-429.DOI
15 
Mun, J. H., and Yang, K. H. (2016) Load Capacity of Squat RC Shear Walls by Strut-and-Tie Model. Magazine of Concrete Research 68(24), 1265-1277.DOI
16 
Mun, J. H., Yang, K. H., and Lee, Y. J. (2016) Seismic Tests on Heavyweight Concrete Shear Walls with Wire Ropes as Lateral Reinforcement. ACI Structural Journal 113(4), 665- 675.DOI
17 
NZS (2006) Concrete Structures Standards: Part 1 - The Design of Concrete Structures (NZS 3101.1). Wellington, New Zealand: New Zealand Standards (NZS).URL
18 
Oh, Y. H., Lyu, S. I., and Moon, J. H. (2022) Structural and Seismic Performance of Special Structural Walls Reinforced with Spiral Transverse Ties. Journal of the Korea Concrete Institute 34(1), 23-32.DOI
19 
Park, R., and Paulay, T. (1975) Reinforced Concrete Structures. New Jersey, USA: Wiley Interscience Publication.URL
20 
Park, R., Priestley, M. N., and Gill, W. D. (1982) Ductility of Square-Confined Concrete Columns. Journal of the Structural Division, ASCE 108(4), 929-950.DOI
21 
Priestley, M. J. N., and Kowalsky, M. J. (1998) Aspects of Drift and Ductility Capacity of Rectangular Cantilever Structural Walls. Bulletin of the New Zealand Society for Earthquake Engineering 31(2), 73-85.DOI
22 
Thomsen, J., and Wallace, J. (2004) Displacement-Based Design of Slender Reinforced Concrete Structural Walls-Experimental Verification. Journal of Structural Engineering, ASCE 130(4), 618-630.DOI
23 
Yang, K. H. (2022) Evaluation of Curvature and Displacement Ductility Ratios of Lightweight Aggregate Concrete. Journal of the Korea Concrete Institute 34(3), 235-242.DOI
24 
Yang, K. H., Mun, J. H., and Hwang, S. H. (2021) Compressive Stress-Strain Model for Confined Lightweight Concrete Based on Brittleness Number. Journal of Civil Engineering, KSCE 25(8), 3041-3053.DOI
25 
Yang, K. H., Mun, J. H., and Oh, N. K. (2022) Flexural Behavior of Lightweight Aggregate Concrete Shear Walls with Boundary Element. Journal of Structural Engineering, ASCE 148 (1), 1-14.DOI
26 
Yang, K. H., Sim, J. I., and Thomas, H.-K. K. (2013) Generalized Equivalent Stress Block Model considering Varying Concrete Compressive Strength and Unit Weight. ACI Structural Journal 110(5), 791-799.URL