Mobile QR Code QR CODE : Journal of the Korean Society of Civil Engineers

References

1 
"Budhu, M. (2010). Soil Mechanics and Foundations (3rd ed.). Wiley."URL
2 
"Colliat, J. L., Boisard, P., Sparrevik, P. and Granet, J. C. (1998). “Design and installation of suction anchor piles at soft clay site.” Journal of Waterway, Port, Costal and Ocean Engineering, Vol. 124, No. 4, pp. 179-188, https://doi.org/10.1061/(ASCE)0733- 950X(1998)124:4(179)."DOI
3 
"Das, B. M. (2009). Principles of geotechnical engineering (7th ed.). Cengage Learning."URL
4 
"DNV (2014). Geotechnical design and installation of suction anchors in clay, DNVGL Offshore Standard OS-J101."URL
5 
"DNV (2021). Geotechnical design and installation of suction anchors in clay. DNVGL Recommended Practice RP-E303."URL
6 
"Jung, N. Y., An, J. Y., Lee, W. H., Kim, D. H. and Kim, T. H. (2025). “Change in pullout capacity of suction anchor due to V-shaped trench.” KSCE Journal of Civil and Environmental Engineering Research, Vol. 45, No. 1, pp. 73-80, https://doi.org/10.12652/Ksce.2025.45.1.0073 (in Korean)."DOI
7 
"Kim, D. H., Jung, N. Y., Lee, W. H. and Kim, T. H. (2024). “Variation in the pullout capacity according to the tilt and misorientation of a floating offshre wind turbine suction anchor using geometric method.” Journal of Korean Society of Coastal and Ocean Engineers, Vol. 36, No. 3, pp. 95-104, https://doi.org/ 10.9765/KSCOE.2024.36.3.95 (in Korean). "DOI
8 
"Kim, S., Choo, Y. W. and Kim, D. S. (2016). “Pullout capacity of horizontally loaded suction anchor installed in silty sand.” Marine Georesources & Geotechnology, Vol. 34, No. 1, pp. 87-95, https://doi.org/10.1080/1064119X.2014.961622."DOI
9 
"Lee, W. H., Jung, N. Y., An, J. Y., Kim, D. H. and Kim, T. H. (2025). “Variation in the pullout capacity according to the misorientation of suction anchor using geometric method and numerical analysis.” KSCE Journal of Civil and Environmental Engineering Research, Vol. 45, No. 2, pp. 225-235, https://doi.org/10.12652/Ksce.2025.45.2.0225 (in Korean)."DOI
10 
"Lee, W. H. (2025). A study on the variation in the pullout capacity according to the tilt and misorientation of a floating offshore wind turbine suction anchor, Doctoral dissertation, Korea Maritime and Ocean University. In preparation (in Korean)."URL
11 
"Shang, X., Zhao, J. and Zhang, H. (2019). “Obtaining high-resolution seabed topography and surface details by co-registration of side-scan sonar and multibeam echo sounder images.” Remote Sensing, Vol. 11, No. 12, 1496, https://doi.org/10.3390/rs11121496."DOI
12 
"Sparrevik, P., Saue, M., Shin, Y. and Langford, T. (2017). “Suction anchor design, installation and monitoring (Part 1).” Geotechnical Engineering, Vol. 33, No. 5, pp. 25-33 (in Korean)."URL
13 
"Zhang, M.-H., Yin, Z.-Y. and Fu, Y. (2023). “Numerical investigation on the pull-out capacity of suction anchors in sand considering torsional and mooring line effects.” Computers and Geotechnics, Vol. 160, 105524, https://doi.org/10.1016/j.compgeo.2023.105524."DOI