Title |
Analysis on the Elastic Shear Buckling Characteristics of Corrugated Steel Plate in Accordance with Corrugation Shape
|
Authors |
손수덕(Su-Deok Shon) ; 유미나(Mi-Na Yoo) ; 이승재(Seung-Jae Lee) |
DOI |
http://dx.doi.org/10.11112/jksmi.2014.18.6.011 |
Keywords |
파형강판 ; 파형형상 ; 전단좌굴 ; 연성좌굴모드 ; 기하학적 파라메타 Corrugated steel plate ; Corrugation shape ; Shear buckling ; Interactive buckling mode ; Geometric parameter |
Abstract |
This paper aims at comparing and analyzing shear buckling characteristics between sinusoidal corrugation shape and trapezoidal one. For this, I adopted the equal-length trapezoidal corrugation and sinusoidal one for the analytical models, and analyzed their shear buckling characteristics through linear buckling analysis and on its theory. Generally, the shear buckling shapes of corrugated steel plates are classified into local buckling, global buckling, and interactive buckling from the two buckling modes. Sinusoidal corrugation shape, unlike trapezoidal corrugation, does not have flat sides, which causes another tendency in shear buckling mode. Especially, the changes and different aspects of shear buckling on the boundary between local buckling and global buckling appear in different corrugation shapes. According to the analysis results, interactive buckling mode appeared on the boundary of local buckling and global bucking in trapezoidal corrugation. However, in the case of corrugated steel plates with sinusoidal configuration, interactive buckling mode appeared in the part where global bucking takes place. Besides, trapezoidal shapes are of advantages on shear buckling resistance in the local buckling section, and so are sinusoidal shapes in the global buckling section.
|