(1996), Testing the Bond between Repair Materials and Concrete Substrate, ACI Material
Journal, 93(6), 553-558.
(1993), Development of a Patch Test to Study the Behaviour of Shallow Concrete Patch
Repairs, Magazine of Concrete Research, 45(164), 221-229.
(1995), Tensile Bond Testing of Concrete Repairs, Material and Structures RILEM,
28(5), 249-259.
(1999), Shear Bond Testing of Concrete Repairs, Cement and Concrete Research Elsevier,
29(7), 1067-1079.
(2005), Long-Term Performance of Bonded Overlays Subjected to Differential Shrinkage,
Ph.D. Thesis, 27-49.
(2012), Best Practices for Preparing Concrete Surfaces Prior to Repairs and Overlays,
1-17.
(2012), Bond Strength between UHPC and Normal Strength Concrete (NSC) in accordance
with Split Prism and Freeze-Thaw Cycling Tests, Proceedings of Hipermat 2012, 3rd
International Symposium on UHPC and Nanotechnology for High Performance Construction
Materials, 377-384.
(2010), Flexural Test on Composite Deck Slab Produced with Extruded ECC Panel, Journal
of the Korea Concrete Institute KCI, 22(5), 695-702.
(2011), Estimation of Bond Strength Envelopes for Old-to-New Concrete Interfaces
Based on a Cylinder Splitting Test, Construction and Building Materials, Elsevier,
25(3), 1222-1235.
(2013), Ultra-High Performance Concrete UHPC: Fundamental, Design Examples Ernst
& Sohn Kassel, 17-18.
(2012), Experimental Investigation into a Ductile FRP Stay-In-Place Formwork System
for Concrete Slab, Construction and Building Materials Elsevier, 49, 1013-1023.
(1964), A 10-Year Report on Performance of Bonded Concrete Resurfacing, Highway Research
Record (94): Highway Research Board, 61-76.
(2011), Characterization of Interface Bond of Ultra-High-Performance Concrete Bridge
Deck Overlays, Journal of the Transportation Research Board TRB, 40-49.
(2013), Formwork Development using UHPFRC, Proceedings of the RILEM-fib-AFGC International
Sympsium on Ultra-High Performance Fibre-Reinforced Concrete RILEM Marseille, 197-206.
(2006), Time Dependent Behaviour of Ultra-High Performance Fibre Reinforced Concrete
(UHPFRC), 6th International Ph.D. Symposium in Civil Engineering, 1-8.
(2014), Performance of Fresh and Hardened Ultra High Performance Concrete without
Heat Treatment, Journal of the Korea Concrete Institute KCI, 26(1), 23-34.
(2010), The Effect of Steel-Fiber Reinforcement on the Compressive Strength of Ultra
High Performance Cementitious Composites (UHPCC), Journal of The Korea Institute for
Structural Maintenance and Inspection JKSMI, 14(5), 110-118.
(2008), Development of Thin FRP Reinforced GFRC Permanent Formwork Systems, Construction
and Building Materials Elsevier, 22(11), 2250-2259.
(2013), Durability Study of the First PC Bridge Constructed with Ultra High Strength
Fiber Reinforced Concrete in Japan, Proceedings of the RILEM-fib-AFGC International
Sympsium on Ultra-High Performance Fibre-Reinforced Concrete RILEM Marseille, 239-248.
(2006), Method of Test for Splitting Tensile Strength of Concrete KSF 2423, 1-16.
(2007), Method of Test for Slump of Concrete KSF 2402, 1-10.
(2009), Method of Test for Slump Flow of Fresh Concrete KSF 2594, 1-8.
(2010), Standard Test Method for Compressive Strength of Concrete KSF 2405, 1-10.
(2009), Effect of PVC Stay-In-Place Formwork on Mechanical Performance of Concrete,
Journal of Materials in Civil Engineering ASCE, 21(7), 309-315.
(2010), Development of Pseudo-Ductile Permanent Formwork for Durable Concrete Structures,
Material and Structures RILEM, 43(7), 993-1007.
(2001), Transition Zone Studies of New-to-Old Concrete with Different Binders, Cement
Concrete Composites Elsevier, 23(4-5), 381-387.
(2006), Concrete: Microstructure, Properties, and Materials, 21-84.
(2015), The Impact of Surface Preparation on the bond Strength of Repaired Concrete
by Metakaolin Containing Concrete, Construction and Building Materials Elsevier, 80,
76-83.
(2005), Comparison of Method for Evaluating Bond Strength between Concrete Substrate
and Repair Materials, Cement and Concrete Research Elsevier, 35(4), 748-757.
(2014), Full Bridge Testing at Scale Constructed with Novel FRP Stay-In-Plave Structural
Forms for Concrete Deck, Construction and Building Materials Elsevier, 50, 368-376.
(2010), Influence of the Roughness and Moisture of the Substrate Surface on the Bond
between Old and New Concrete, Contemporary Engineering Sciences, 3(3), 139-147.
(1992), Durability of Repaired Concrete Structure, Proceedings of International Symposium
on Advances in Concrete Technology, 741-773.
(1995), Composition of Reactive Powder Concretes, Cement and Concrete Research, 25(7),
1501-1511.
(2011), Factors Affecting Bond between New and Old Concrete, ACI Materials Journal
ACI, 108(4), 449-456.
(2010), Interfacial Shear Bond Strength between Old and New Concrete, Fracture Mechanics
of Concrete and Concrete Structures – Assessment, Durability, Monitoring and Retrofitting
of Concrete Structures, KCI, Seoul, 1195-1200.
(2012), Use of Permanent Ferrocement Forms for Concrete Beam Construction, Material
and Structures RILEM, 45(9), 1319-1329.
(2013), Characterization of the Interfacial Bond between Old Concrete Substrate and
Ultra High Performance Fiber Concrete Repair Composite, Material and Structures RILEM,
46(5), 743-753.
(2012), Mechanical and Permeability Properties of the Interface Between Normal Concrete
Substrate and Ultra High Performance Fiber Concrete Overlay, Construction and Building
Materials Elsevier, 36, 538-548.
(2010), Structural Behavior of Ferrocement-Brick Composite Floor Slab Panel, Construction
and Building Materials Elsevier, 24(11), 2224-2230.
(2011), Interfacial Shear Bond Strength between Old and New Concrete, M. S. Thesis,
1-21.
(2013), Experimental Investigation of Shear Behavior of RC Beam using UFC U-Shaped
Permanent Formwork, Proceedings of the RILEM-fib-AFGC International Sympsium on Ultra-High
Performance Fibre-Reinforced Concrete RILEM Marseille, 187-196.