(1988), Relation between Resistivity and Corrosion Rate of Reinforcements in Carbonated
Mortar made with Several Cement Types, Cement Concr. Res, 18(5), 687-698.
(1989), Defect types and non destructive testing techniques for composites and bonded
joints, Constr. Build. Mater, 3(4), 170-183.
(1993), Calculation of chloride diffusion coefficients in concrete from ionic migration
measurement, Cement Concr. Res, 23(3), 724-742.
(1996), Corrosion rate monitoring in the laboratory and on-site, Constr. Build. Mater,
10(5), 315-328.
(2009), Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel
in Concrete, American Society of Testing and Materials, 1-6.
(1997), Corrosion of Steel in Concrete: Understanding, 1-15.
(2012), Nondestructive Corrosion Detection in RC through Integrated Heat Induction
and IR Thermography, Journal of Non Destructive Evaluation, 31(2), 181-190.
(2008), Bond Strength Prediction for Reinforced Concrete Members with Highly Corroded
Reinforcing Bars, Cement Concr. Compos, 30(7), 603-611.
(2000), DuraCrete Final Report, DuraCrete Probabilistic Performance Based Durability
Design of Concrete Structures
(2003), Hall-Cell Potential Measurements—Potential Mapping on Reinforced Concrete
Structures, Mater. Struct, 36(7), 461-471.
(2005), Corrosion Rate of Steel in Concrete Measurements beyond the Tafel law, Corros.
Sci, 47(12), 3019-3033.
(2004), Probability-Based Durability Analysis of Concrete Harbor Structures, Proceedings
of CONSEC04, 999-1006.
(2012), Non Destructive Technique for Steel Corrosion Detection using Heat Induction
and IR Thermography, Journal of the Korea Institute for Structural Maintenance and
Inspection, 16(2), 40-48.
(2009), Service Life Prediction of Concrete Wharves with Early-aged Crack: Probabilistic
Approach for Chloride Diffusion, Struct. Saf, 31(1), 75-83.
(2013), Evaluation of Half Cell Potential Measurement in Cracked Concrete Exposed
to Salt Spraying Test, Journal of the Korea Concrete Institute, 25(6), 621-630.
(2014), Effect of Cover Depth, w/c ratio, and crack width on half cell potential
in cracked concrete exposed to salt sprayed condition, Constr. Build. Mater, 54(15),
636-645.
(1998), Modeling the Dynamic Corrosion Process in Chloride Contaminated Concrete
Structures, Cement Concr. Res, 28(3), 365-379.
(2012), A Study on the Estimation of Moisture Condition of Concrete by Resistivity
Method, Journal of Korea Architecture Institute, 28(12), 69-76.
(2006), Application of Impulse-Thermography for Nondestructive Assessment of Concrete
Structures, Cement Concr. Compos, 28(4), 393-401.
(2009), Multi-Scale Modeling of Structural Performance, J. Adv. Concr. Technol, 1(2),
322-325.
(2012), Analysis technique for chloride penetration in cracked concrete using equivalent
diffusion and permeation, Constr. Build. Mater, 29(2), 183-192.
RILEM (1994), Durability Design of Concrete Structures, Report of RILEM Technical
Committee 130-CSL, 28-52.
(2003), Electrochemical Studies on the Corrosion Performance of Activated Fly ash
Blended Cements, Mater. Des, a, 14(3), 261-283.
(2003), Influence of Activated Fly ash on Corrosion Resistance and Strength of Concrete,
Cement Concr. Compos, b, 25(7), 673-680.
(2005), A Study on analytical technique of chloride diffusion considering characteristics
of mixture design for high performance concrete using mineral admixture, Journal of
KSCE, 25(1A), 213-223.
(2006), Studies on the Corrosion Resistance of Reinforced Steel in Concrete with
Ground Granulated Blast-Furnace Slag–An overview, J. Hazard. Mater, 138(2), 226-233.
(2006), Environmental Influences and Assessment of Corrosion Rate of Reinforcing
Bars using the Linear Polarization Resistance Technique, Journal of Korea Architecture
Institute, 22(2), 107-114.
(2008), Development of Reinforced Concrete Corrosion Amount Presumption Method by
Ultrasonic Method, 17th World Conference on Nondestructive Testing, 1-6.
(2009), A Study on Corrosion Potential of Cracked Concrete Beam according to Corrosion
Resistance Assessment, Journal of the Korea Institute for Structural Maintenance and
Inspection, 13(1), 97-105.
(1999), Modeling chloride diffusion in concrete: Effect of fly ash and slag, Cement
Concr. Res, 29(4), 487-495.
(1998), Prediction of the service life of RC with crack exposed to chloride attack,
Japan Symposium of Rehabilitation of Concrete Structure, 1-6.