JKSMI
Journal of the Korea Institute for
Structural Maintenance and Inspection
KSMI
Contact
Open Access
Bi-monthly
ISSN : 2234-6937 (Print)
ISSN : 2287-6979 (Online)
http://journal.auric.kr/jksmi/
Mobile QR Code
Journal of the Korea Concrete Institute
J Korea Inst. Struct. Maint. Insp.
Indexed by
Korea Citation Index (KCI)
Main Menu
Main Menu
About Journal
Aims and Scope
Subscription Inquiry
Editorial Board
For Contributors
Instructions For Authors
Ethical Guideline
Crossmark Policy
Submission & Review
Archives
Current Issue
All Issues
Journal Search
Home
All Issues
2021-08
(Vol.25 No.4)
10.11112/jksmi.2021.25.4.28
Journal XML
XML
PDF
INFO
REF
References
1
Jang, S. Y. (2003), Modeling of Chloride Transport and Carbonation in Concrete and Prediction of Service Life of Concrete Structures Considering Corrosion of Steel Reinforcement, Ph. D. Dissertation, Seoul, Seoul National University, Department of Civil Engineering.
2
Broomfield, J. P. (1997), Corrosion of Steel in Concrete: Understanding, Investigation and Repair, E&FN, London, 1-15.
3
Chung, L., Kim, J. H. J., and Yi, S. T. (2008), Bond Strength Prediction for Reinforced Concrete Members with Highly Corroded Reinforcing Bars, Cement and Concrete Composites, 30(7), 603-611.
4
Dinakar, P., Babu, K. G., and Santhanam, M. (2007), Corrosion Behaviour of Blended Cements in Low and Medium Strength Concretes, Cement and Concrete Composites, 29(2), 136-145.
5
Johannesson, B., and Utgenannt, P. (2001), Microstructural Changes Caused by Carbonation of Cement Mortar, Cement and Concrete Research, 31(6), 925-931.
6
Steffens, A., Dinkler, D., and Ahrens, H. (2002), Modeling Carbonation for Corrosion Risk Prediction of Concrete Structures, Cement and Concrete Research, 32(6), 935-941.
7
Arya, C., Buenfeld, N. R., and Newman, J. B. (1990), Factors Influencing Chloride-Binding in Concrete, Cement and Concrete Research, 20(2), 291-300.
8
Lopez, W., and Gonzalez, J. A. (1993), Influence of the Degree of Pore Saturation on the Resistivity of Concrete and the Corrosion Rate of Steel Reinforcement, Cement and Concrete Research, 23(2), 368-376.
9
Naish, C. C., Harker, A., and Carney, R. F. A. (1990), Concrete Inspection: Interpretation of Potential and Resistivity Measurements, Corrosion of reinforcement in concrete, Society of Chemical Industry, WARWICKSHIRE, 612.
10
Lim, Y. C. (2012), A Study on the Estimation of Moisture Condition of Concrete by Resistivity Method, Journal of the Architectural Institute of Korea Structure & Construction, 28(12), 69-76.
11
Alonso, C., Andrade, C., and González, J. A. (1988), Relation Between Resistivity and Corrosion Rate of Reinforcements in Carbonated Mortar Made with Several Cement Types, Cement and Concrete Research, 18(5), 687-698.
12
Song, H. W., and Saraswathy, V. (2006), Studies on the Corrosion Resistance of Reinforced Steel in Concrete with Ground Granulated Blast-Furnace Slag—An Overview, Journal of Hazardous Materials, 138(2), 226-233.
13
ASTM C876-09. (2009), Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete, American Society of Testing and Materials, 1-6.
14
Kwon, S. J., and Park, S. S. (2012), Non Destructive Technique for Steel Corrosion Detection Using Heat Induction and Ir Thermography, Journal of the Korea Institute for Structural Maintenance and Inspection, 16(2), 40-48.
15
Baek, S., Xue, W., Feng, M. Q., and Kwon, S. J. (2012), Nondestructive Corrosion Detection in RC Through Integrated Heat Induction and IR Thermography, Journal of Nondestructive Evaluation, 31(2), 181-190.
16
Karthick, S. P., Muralidharan, S., Saraswathy, V., and Thangavel, K. (2014), Long-term Relative Performance of Embedded Sensor and Surface Mounted Electrode for Corrosion Monitoring of Steel in Concrete Structures, Sensors and Actuators B: Chemical, 192, 303-309.
17
Karthick, S., Kwon, S. J., Lee, H. S., Muralidharan, S., Saraswathy, V., and Natarajan, R. (2017), Fabrication and Evaluation of a Highly Durable and Reliable Chloride Monitoring Sensor for Civil Infrastructure, RSC Advances, 7(50), 31252-31263.
18
Shao, X. M., and Feldman, J. L. (2007), Micro-agar Salt Bridge in Patch-Clamp Electrode Holder Stabilizes Electrode Potentials, Journal of neuroscience methods, 159(1), 108-115.
19
Karthick, S., Saraswathy, V., Kwon, S. J., Lee, H. S., Rethinam, N., and Park, D. J. (2018), A Novel In-Situ Corrosion Monitoring Electrode for Reinforced Concrete Structures, Electrochimica Acta, 259, 1129-1144.
20
Kim, Y. Y., Kim, J. M., Bang, J. W., and Kwon, S. J. (2014), Effect of Cover Depth, W/C Ratio, and Crack Width on Half Cell Potential in Cracked Concrete Exposed to Salt Sprayed Condition, Construction and Building Materials, 54, 636-645.
21
Park, J. S., Yoon, Y. S., and Kwon, S. J. (2018), Relations Analysis between Strength and Time-parameter in High Performance Concrete Containing GGBFS Cured for 1 year, Journal of Korea Concrete Institute, 30(4), 375-381.
22
Nguyen, P. T., Bastidas-Arteaga, E., Amiri, O., and El Soueidy, C. P. (2017), An Efficient Chloride Ingress Model for Long-term Lifetime Assessment of Reinforced Concrete Structures Under Realistic Climate and Exposure Conditions, International Journal of Concrete Structures and Materials, 11(2), 199-213.
23
Kim, J. K., Cho, H. R., Kim, M. H., Kim, Y. H., and Moon, K. M. (2007), Effect of W/C and Thickness to Corrosion Property of Reinforced Concrete, Journal of Advanced Marine Engineering and Technology, 1-6.
