JKSMI
Journal of the Korea Institute for
Structural Maintenance and Inspection
KSMI
Contact
Open Access
Bi-monthly
ISSN : 2234-6937 (Print)
ISSN : 2287-6979 (Online)
http://journal.auric.kr/jksmi/
Mobile QR Code
Journal of the Korea Concrete Institute
J Korea Inst. Struct. Maint. Insp.
Indexed by
Korea Citation Index (KCI)
Main Menu
Main Menu
About Journal
Aims and Scope
Subscription Inquiry
Editorial Board
For Contributors
Instructions For Authors
Ethical Guideline
Crossmark Policy
Submission & Review
Archives
Current Issue
All Issues
Journal Search
Home
All Issues
2022-08
(Vol.26 No.4)
10.11112/jksmi.2022.26.4.11
Journal XML
XML
PDF
INFO
REF
References
1
Korea Design Standard., (2021), Concrete seismic design standards, Korea construction standards center, KDS 14 20 80
2
Park, S. K., Lee, K., Ko, W. J. (2000), An experimental research on the flexural behavior of concrete beam with lock joint coupler bars, Journal of Korea Institute for Structural Maintenance and Inspection, 4(3), 197-204.
3
Lee, S. S., Chun, H. M. (2018), Development of filler type mechanical splice for high strength re-bar, Journal of the Korea Academia-Industrial cooperation Society, 19(12), 686-693.
4
Sim, J. S., Park, C. W., Kang, T. S., Kim, T. S. (2008), An experimental study of tension properties on new developed up set coupler, Journal of Korea Institute for Structural Maintenance and Inspection, 12(5), 109-115.
5
Kim, H. K. (2002), Experimental study on tensile strength and ductility of high strength grout-filled splice sleeve, Architectural institute of Korea, 18(2), 35-42.
6
Kim, H. K. (2001), Structural performance of high strength grout-filled splice sleeve system, Journal of the Korea Concrete Institute, 13(5), 516-524.
7
Kim, H. K. (1998), Performance of grout-filled splice sleeve system under cyclic loading, Journal-Architectural institute of Korea Structure and Construction, 14(9), 73-81.
8
Ling, J. H., Rahman, A. B. A., Ibrahim, I. S. (2014), Feasibility study of grouted splice connector under tensile load, Construction and Building Materials, 50, 530-539.
9
Choi, H. B., Kim, G. H., Kim, J. Y., Seo, D. S., Kang, K. I. (2003), A study on development of tempcore re-bar mechanical connection by making screw on node and rib, Journal of the Architectural Institute of Korea, 19(3), 99-106.
10
Kim, E. H. (2008), An Experimental Study of the Beam Members to Develop the Friction Type Coupler for Big Size Steel bars, Seoul, Hanyang University.
11
Bae, S. H. (2015), Evaluation on the Limit State Strain and Necking Region of the Rebar with Mechanical Splice, Busan, Busan National University.
12
Kim, D. J., Lee, J. M., Lee, J. S., Lee, J. W. (2016), Construct-ability of preformed bar arrangement with threaded reinforcing bars and connectors, Magazine of the Korea Concrete Institute, 28(5), 43-47.
13
Lee, S. S., Chun, H. M. (2018), Development of Filler Type Mechanical Splice for High Strength Re-bar, Journal of the Korea Academia-Industrial Cooperation Society, 19(12), 686-693.
14
Kim, J. M., Choi, S. W., Kim, B. M. (2019), Mechanical Splicing Characteristic of the Threaded Bar according to the Contact Conditions of the Transverse Rib, Transactions of Materials Processing, 28(3), 145-153.
15
Kwon, K. J., Park, D. S., Joung, W. S. (2011), Experimental evaluation on structural performance of large diameter reinforcing steel bars with spliced sleeves, Journal of Korea Institute for Structural Maintenance and Inspection, 15(1), 180-188.
16
Liu, X., Cui, T., Wu, M., Li, J. (2011), Test on seismic behavior of pre-cast shear walls with vertical reinforcements spliced by grout sleeves, Journal of Inner Mongolia University of Science and Technology, 35(2), 195-200.
17
American Concrete Institute., (2019), Building Code Requirement for Structural Concrete and Commentary, ACI 318-19
18
American Concrete Institute., (2013), Code Requirements for Nuclear Safety-Related Concrete Structures and Commentary, ACI 349-13
19
Canadian Standards Association., (2004), Design of Concrete Structures, CSA-A23.3-04
20
Korean Agency for Technology and Standards., (2007), Test Pieces for Tensile Test for Metallic Materials, Korean Standards Association. KS D 0801
21
Korean Agency for Technology and Standards., (2019), Method of Inspection for Mechanical Splicing Joint of Bars for Concrete Reinforcement, KS D 0249
22
Yoojin Engineering., (2020), Development of YG-Smart coupler, Seoul, Ministry of SMEs and Startups