Kim, K. S., Park, K. T., and Woo, T. R. (2022), Evaluation on the bending behavior after yield of RC beam by using image processing method(II): Focused on the tensile part, Journal of the Korea Institute for Structural Maintenance and Inspection, KSMI, 26(6), 1-10 (in Korean).

Woo, T. R., Jung, C. Y., Kim, I. T., Lee, J. H., and Cheung, J. H. (2020), Evaluation of the bending behavior of RC beam by using color-based image processing method, Journal of the Korea Institute for Structural Maintenance and Inspection, KSMI, 24(4), 48-54 (in Korean).

Lee, J. H., Jung, C. Y., Woo, T. R., and Cheung, J. H. (2019), Post-yielding tension stiffening of reinforced concrete members using an image analysis method with a consideration of steel ratios, Advances in Concrete Construction, Techno-Press, 7(2), 117-126.

Ministry of Land, Infrastructure, and Transport (2015), Highway Bridge Design Standard (Limit State Design). (in Korean).

Jeong, H. C. (2015), Material model of confined concrete considering the mechanical properties change with lateral confinements, Ph. D dissertation, Ulsan, Ulsan university, Dept. of Civil Engineering.

British Standard Institution. (2004), Eurocode 2: Design of concrete structures.

Hoshikuma, J., Kawashima, K., and Nagaya, K. W. (1997), Stress-strain for reinforced concrete it bridge piers, Journal of Structural Engineering, ASCE, 123(5), 624-633.

Comite Euro-International Du Beton (1990), CEB-FIP Model code 1990.

Mander, J. B., Priestley, M. J. N., and Park, R. (1988), Theoretical stress-strain model for confined concrete, Journal of Structural Division, ASCE, 114(8), 1804-1826.

Mander, J. B., Priestley, M. J. N., and Park, R. (1988), Observed stress-strain behavior of confined concrete, Journal of Structural Division, ASCE, 114(8), 1827-1849.

Kent, D. C., and Park, R. (1971), Flexural members with confined concrete, Journal of Structural Division, ASCE, 97(7), 1969-1988.

Scott, B. D., Park, R., Preistley, M. J. N. (1982), Stress-strain behavior of concrete confined by overlapping hoops at low and high stress rate, ACI Journal Proceedings, 79(1), 13-27.